Search results

through holes are generally tapered since it will tap faster and the chips will be released when the tap exits the hole. The etymology of the blind hole is...

tapered types of tap; the tapered end ("tap chamfer") of a bottoming tap is too short to successfully start into an unthreaded hole. In the US, they are...

parlance, a keg is different from a cask. A cask has a tap hole near the edge of the top, and a spile hole on the side used for conditioning the unfiltered...

A self-tapping screw is a screw that can tap its own hole as it is driven into the material. More narrowly, self-tapping is used only to describe a specific...

drill and tap size chart for all drills and taps, imperial and metric, up to 36.5 millimetres (1.44 in) in diameter. In manufactured parts, holes with female...

opens the "tap hole" to let the metal flow into a ladle or other container to hold the molten metal. When enough metal is drawn off the "tap hole" is plugged...

A vampire tap (also called a piercing tap) is a device for physically connecting a station, typically a computer, to a network that used 10BASE5 cabling...

This Is Spinal Tap (or simply Spinal Tap) is the soundtrack to the film This Is Spinal Tap, released in 1984. It was re-released in 2000 with lyrics and...

dolomite, high alumina, monolithics, silica, flow control products and tap hole clay refractories having a consolidated installed capacity of 4,00,000...

Tapping of the material from the furnace takes place intermittently. When enough smelted ferrochrome has accumulated in the furnace hearth, the tap hole...

made by threading a 6 mm shank, and the nut or threaded hole is made by tapping threads into a hole of 5 mm diameter (6 mm − 1 mm). Metric hexagon bolts...

applications. The tapped-hole rack was first replaced by clearance-hole (Round Hole, Round Unthreaded Holes, and Versa Rail) racks. The holes are large enough...

A beer tap is a valve, specifically a tap, for controlling the release of beer. While other kinds of tap may be called faucet, valve or spigot, the use...

materials in the hearth of a blast furnace below the tap hole. The target of the salamander tapping is to remove the remaining hot metal and slag from the...

This Is Spinal Tap (also known as This Is Spın̈al Tap: A Rockumentary by Martin Di Bergi) is a 1984 American mockumentary film co-written and directed...

furnace was tilted, but often modern furnaces have an eccentric bottom tap-hole (EBT) to reduce inclusion of nitrogen and slag in the liquid steel. These...

the steel is poured through a tap hole into a steel ladle with basic refractory lining. This process is called tapping the steel. The steel is further...

Spinal Tap (stylized as Spın̈al Tap, with a dotless letter i and a metal umlaut over the n) are a fictional English heavy metal band created by the American...

to appear. Nevertheless, the standard tap is still designed to be hammered into yielding material, punching a hole as it goes. All modern casks, even the...

half of old tapping holes. In comparison to maples, birch trees are considered far less tolerant to the wounds caused by tapping, so more conservative...