ANSI/ASME Y14.1
 | This article needs additional citations for verification. (November 2008) |
In 1992, the American National Standards Institute adopted ANSI/ASME Y14.1 Decimal Inch Drawing Sheet Size and Format[1] which defined a regular series of paper sizes based upon the de facto standard 8+1⁄2 in × 11 in "letter" size which it assigned "ANSI A". This series also includes "ledger"/"tabloid" as "ANSI B". This series is somewhat similar to the ISO 216 standard in that cutting a sheet in half would produce two sheets of the next smaller size. Unlike the ISO standard, however, the arbitrary aspect ratio forces this series to have two alternating aspect ratios. ANSI/ASME Y14.1 has been revised or updated in 1995, 2005 and 2012. It has an accompanying standard ANSI/ASME Y14.1M that defines metric drawing paper sizes based upon ISO 216 and ISO 5457.[2]
With care, documents can be prepared so that the text and images fit on either ANSI or their equivalent ISO sheets at 1:1 reproduction scale.
| Name | in × in | mm × mm | Ratio | Alias | Similar ISO A size |
|---|---|---|---|---|---|
| ANSI A | 8+1⁄2 × 11 | 216 × 279 | 22⁄17 = 1.2941 | Letter | A4 |
| ANSI B | 17 × 11 11 × 17 |
432 × 279 279 × 432 |
17⁄11 = 1.5455 | Ledger[3] Tabloid |
A3 |
| ANSI C | 17 × 22 | 432 × 559 | 22⁄17 = 1.2941 | A2 | |
| ANSI D | 22 × 34 | 559 × 864 | 17⁄11 = 1.5455 | A1 | |
| ANSI E | 34 × 44 | 864 × 1118 | 22⁄17 = 1.2941 | A0 | |
| ANSI F | 28 × 40 | 711 × 1016 | 10⁄7 = 1.4286 | A0 | |
| ANSI G | 11 × 22.5–90 | 279 × 572–2286 | — | ||
| ANSI H | 28 × 44–143 | 711 × 1118–3632 | — | ||
| ANSI J | 34 × 55–176 | 864 × 1397–4470 | — | ||
| ANSI K | 40 × 55–143 | 1016 × 1397–3632 | — |
Size F does not continue the alphabetic series, because it does not exhibit the same aspect ratios.
Sizes G, H, J and K are roll formats. G size is 22+1⁄2 in (571.5 mm) high, but variable width up to 90 in (2286 mm) in increments of 8+1⁄2 in. Such sheets were at one time used for full-scale layouts of aircraft parts, wiring harnesses and the like, but today are generally not needed, due to widespread use of computer-aided design (CAD) and computer-aided manufacturing (CAM).
| Name | mm × mm | Ratio |
|---|---|---|
| A0 | 841 × 1189 | 1.414 |
| A1 | 594 × 841 | 1.414 |
| A2 | 420 × 594 | 1.414 |
| A3 | 297 × 420 | 1.414 |
| A4 | 297 × 210 | 1.414 |
| A1.0 | 594 × 1189 | 2 |
| A2.1 | 420 × 841 | 2 |
| A2.0 | 420 × 1189 | 2.831 |
| A3.2 | 297 × 594 | 2 |
| A3.1 | 297 × 841 | 2.831 |
| A3.0 | 297 × 1189 | 4 |
References
- ^ http://standards.globalspec.com/std/276642/asme-y14-1
- ^ http://standards.globalspec.com/std/1577705/asme-y14-1m http://files.asme.org/Catalog/Codes/PrintBook/34176.pdf
- ^ Adobe Systems Incorporated (February 9, 1996), PostScript Printer Description File Format Specification (4.3 ed.), San Jose, California, p. 191, http://partners.adobe.com/public/developer/en/ps/5003.PPD_Spec_v4.3.pdf Archived 2008-07-23 at the Wayback Machine. Retrieved on 6 March 2008
 | This standards- or measurement-related article is a stub. You can help Wikipedia by expanding it. |