Advanced Aviation Cobra

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Dawnseeker2000 (talk | contribs) at 21:10, 29 May 2017 (→‎top: WP:BOLDAVOID using AWB). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Cobra
Role Homebuilt ultralight aircraft
Manufacturer Advanced Aviation
First flight 1980s
Developed from Eipper Quicksilver

The Advanced Aviation Cobra was a U.S. ultralight aircraft of extremely minimalist design marketed for homebuilding, developed from the Advanced Aviation Husky. The pilot is seated in an open framework suspended beneath a fabric-covered wing on which the engine (adapted from a snowmobile) and pusher propeller are also mounted. Early Cobras (Model A) had spoilers for roll control, while the Model B had traditional full three-axis control using ailerons. A two-seat training version, known as the King Cobra was also available.[1]

Specifications (Model B)

Data from Cliche[1]

General characteristics

  • Crew: one
  • Wingspan: 35 ft (11 m)
  • Wing area: 152 sq ft (14.1 m2)
  • Empty weight: 235 lb (107 kg)
  • Gross weight: 525 lb (238 kg)
  • Fuel capacity: 4.8 U.S. gallons (18 L; 4.0 imp gal)
  • Powerplant: 1 × Cuyuna 430R twin cylinder, two-stroke engine with reduction drive, 30 hp (22 kW)

Performance

  • Maximum speed: 65 mph (105 km/h, 56 kn)
  • Cruise speed: 55 mph (89 km/h, 48 kn)
  • Stall speed: 24 mph (39 km/h, 21 kn)
  • Range: 130 mi (210 km, 110 nmi)
  • Service ceiling: 9,900 ft (3,000 m)
  • Maximum glide ratio: 9:1
  • Rate of climb: 1,000 ft/min (5.1 m/s)

References

  1. ^ a b Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, page E-11. Cybair Limited Publishing, 2001. ISBN 0-9680628-1-4