Jump to content

Antonio de Torres Jurado

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by MelbourneStar (talk | contribs) at 13:26, 7 November 2016 (Reverted edits by 64.228.252.193 (talk) (HG) (3.1.21)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Antonio de Torres Jurado

Antonio de Torres Jurado (13 June 1817 in Almería, Andalucía – 19 November 1892) may have been a Spanish guitarist and luthier, and "the most important Spanish guitar maker of the 19th century."[1]

It is with his designs that the first recognisably modern classical guitars are to be seen.[2] Most acoustic guitars in use today are derivatives of his designs.

Biography

Born in spain antonio torres de San Urbano, Almería, Antonio de Torres was the son of Juan Torres, a local tax collector, and Maria Jurado. As was common, when he was 12 he started an apprenticeship as a carpenter. In 1833, a dynastic war broke out, and soon after Torres was conscripted into the army. Through his father's machinations, young Antonio was dismissed as medically unfit for service. As only single men and widowers without children were subject to conscription, in 1835 his family pushed Torres into a hastily arranged marriage to Juana María López, the 13-year-old daughter of a shopkeeper. Children soon followed: a daughter in 1836, another in 1839, and a third in 1842, who died a few months later. His second daughter also died. In 1845 his wife died at the age of 23, of tuberculosis. These were difficult years for Torres, who was often in debt and forced to look for more lucrative forms of employment.

Although there is some debate as to who taught Torres, one theory is that some time around 1842, Torres may have gone to work for José Pernas in Granada, rapidly learning to build guitars. He soon returned to Seville, and opened a shop on the Calle de Cerragería No. 7 that he shared with Manuel Soto y Solares. Although he made some guitars during the 1840s, it was not until the 1850s on the advice of the renowned guitarist and composer Julián Arcas, that Torres made it his profession, and he began building in earnest. Julián Arcas offered Torres advice on building, and their collaboration turned Torres into an inveterate investigator of the guitar construction. Torres reasoned that the soundboard was key. To increase its volume, he made his guitars not only larger, but fitted them with thinner, hence lighter soundboards that were arched in both directions, made possible by a system of fan-bracing for strength.These bracing struts were laid out geometrically, based on two isosceles triangles joined at their base creating a kite shape, within which the struts were set out symmetrically.

Guitar by Torres (1862)
at Museu de la Música de Barcelona (MDMB 625).[3]

While Torres was not the first to use this method he was the one who perfected the symmetrical design. To prove that it was the top, and not the back and sides of the guitar that gave the instrument its sound, in 1862 he built a guitar with back and sides of papier-mâché. (This guitar resides in the Museu de la Musica in Barcelona, and before the year 2000 it was restored to playable condition by the brothers Yagüe, Barcelona). [4]

There is an anecdote about how he had made a guitar made like a Chinese puzzle that could be assembled without glue, and disassembled would fit in a shoe box. There is no evidence that he ever made such a guitar though.

During his later years, Torres' close friend, a priest named Juan Martínez Sirvent, lent him a hand in his workshop. Many years later, in 1931 Sirvent wrote a letter to Francisco Rodríguez Torres, mentioning the following explanation Torres made when he, at the age of 68 was asked by the famous father Garzón at a dinner about his "secret" of how to make his outstandingly sounding guitars:[5]

"[...] smilingly [Torres] responded: 'Father, I am very sorry that a man like you also falls victim of that idea that runs among ignorant people, Juanito (that is how he addressed me) has been witness to the secret many times, but it is impossible for me to leave the secret behind for posterity; this will go to the tomb with me for it is the result of the feel of the tips of the thumb and forefinger communicating to my intellect whether the soundboard is properly worked out to correspond with the guitar maker's concept and the sound required of the instrument'. Everyone was left convinced that the artistic genius cannot be passed on [...]"

In 1868, Torres married again, wedding Josefa Martín Rosada. Shortly after, Torres met Francisco Tárrega for the first time. Tárrega, who was then aged seventeen, had come to Seville from Barcelona to buy a Torres guitar from the maker of Julián Arcas' instrument. Torres offered him a modest guitar he had in stock, but on hearing him play, offered him a much better guitar that he had made for himself a few years before.

About 1870, Don Antonio, who was then in his 50s, closed his shop in Seville and moved back to Almería where he and his wife opened up a china and crystal shop on the calle Real. About five years later, Don Antonio began his "second epoch" as he refers to it on the labels of his guitars, building part-time when not busy in the china shop. After the death of his wife, Josefa, in 1883, Torres began to devote increasing amounts of time to building making some 12 guitars a year until his death in La Cañada de San Urbano, Almería at the age of 75.

Guitars

Torres guitars are divided into two periods. The first, belonging to Sevilla from 1852–1870; the second being the years 1871-1893 in Almería. The guitars Torres made were so superior to those of his contemporaries that their example changed the way guitars were built, first in Spain, and then in the rest of the world. Although they are not particularly loud by modern standards, they have a clear, balanced, firm and rounded tone that projects very well. His guitars were widely imitated and copied. Because he never signed his guitars, and only numbered those from his second epoch, many fake Torres have been made, some by well-known and expert makers.

While the overall pattern of the modern classical guitar derives from Torres, there are some difference between Torres' classical guitars and the modern instrument. Torres' guitars all had soundboards of European spruce (Picea Abies); now Western Red Cedar (Thuja Plicata) is also frequently used. Luthiers have continued to develop the bracing of the soundboard, but most still use some version of the fan-bracing that Torres' pioneered. Torres' guitars were strung with gut trebles and basses of silk threads, overwound with silver. Since the 1950s almost all classical guitars have been strung with nylon. The tuning heads of Torres' guitars were often set with traditional ebony friction pegs, similar to those of other string instruments. His later instruments were fitted with mechanical tuners, which are universal on classical guitars today.

Inventory of guitars

La Leona (1856)
and Wulfin Lieske
Guitar by Torres (1859)
at Museu de la Música de Barcelona (MDMB 626)[6]

This is an incomplete list of guitars made by Antonio de Torres.

See also

References

  1. ^ Bruné, R.E. (September 2011). "1883 Antonio de Torres No. 52". Vintage Guitar. pp. 84–88.
  2. ^ Morrish, John. "Antonio De Torres". Guitar Salon International. Retrieved 2011-05-08. {{cite web}}: Cite has empty unknown parameter: |coauthors= (help)
  3. ^ "MDMB 625: Guitarra, by Antonio de Torres Jurado (1862)". Catalogue online, Museo de la Música. MDMB 625.
  4. ^ Grondona, Stefano (2001). "La Chitarra di Liuteria, Masterpieces of Guitar Making". pp. 58–61.
  5. ^ Romanillos, José L. (1990) [1987]. "Antonio de Torres, Guitar Maker, His Life & Work". pp. 16–17.
  6. ^ "MDMB 626: Guitarra, by Antonio de Torres Jurado (1859)". Catalogue online, Museo de la Música. MDMB 626.

Further reading

Regarding Torres 11-string models
Articles
Retrieved from "https://en.wikipedia.org/w/index.php?title=Antonio_de_Torres_Jurado&oldid=748293415"