Berrimah Power Station
| Berrimah Power Station | |
|---|---|
 Berrimah Power Station | |
 | |
| Country | Australia |
| Location | Darwin, Northern Territory |
| Coordinates | 12°25′34″S 130°55′11″E / 12.42611°S 130.91972°E |
| Status | Operational |
| Commission date | 1979 |
| Owner(s) | Power and Water Corporation |
| Thermal power station | |
| Primary fuel | Natural gas |
| Power generation | |
| Units operational | 2 |
| Make and model | JT4A (2) |
| Nameplate capacity | 32.5 MW |
Berrimah Power Station is located in Berrimah, an industrial suburb of Darwin, Northern Territory, Australia.
The Berrimah Power Station was built and commissioned in 1979 after a number of faults with the Stokes Hill Power Station.[1][2]
Its purpose is and has always been for emergency and standby needs. It is fuelled by kerosene. Originally, it had 30MW capacity (3 x 10MW) but as of February 2012, only one unit is still operational, with the other two having been decommissioned.[3]
See also
References
- ^ Power and Water History, "Archived copy". Archived from the original on 2008-02-19. Retrieved 2008-02-24.
{{cite web}}: Unknown parameter|deadurl=ignored (|url-status=suggested) (help)CS1 maint: archived copy as title (link) - ^ Berrimah 30 MW Gas Turbine Station, Darwin, NT, "Archived copy". Archived from the original on 2008-03-02. Retrieved 2008-02-24.
{{cite web}}: Unknown parameter|deadurl=ignored (|url-status=suggested) (help)CS1 maint: archived copy as title (link) - ^ "Archived copy". Archived from the original on 2012-02-17. Retrieved 2012-02-14.
{{cite web}}: Unknown parameter|deadurl=ignored (|url-status=suggested) (help)CS1 maint: archived copy as title (link)
External links
 | This Northern Territory geography article is a stub. You can help Wikipedia by expanding it. |