Jump to content

Gesù Cristo Redentore, Alcamo

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Pugliesig (talk | contribs) at 09:55, 16 October 2016 (External links). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Chiesa Gesù Cristo Redentore
The façade
Religion
Provinceprovince of Trapani
RegionSicily
RiteCatholic
PatronGesù Cristo Redentore
Year consecrated2008
Location
LocationAlcamo, province of Trapani, Italy
MunicipalityAlcamo
StateItaly
TerritoryAlcamo
Architecture
Architect(s)Vincenzo Calvaruso
Typemodern
Funded byDon Benedetto Cottone
Groundbreaking2002

The church of Jesus Christ the Redeemer ( chiesa Gesù Cristo Redentore) is a Catholic church in Alcamo, in the province of Trapani.

Fundation

On June 14, 1985, the bishop of the diocese of Trapani, Mons. Emanuele Romano, established a new Parish dedicated to Gesù Cristo Redentore; it was entrusted to Don Benedetto Cottone (the parson of this Church for 23 consecutive years) starting his experience in small premises located in Via Kennedy, which remained the place of communion for 19 years.

After two years in another place located in Via Tre Santi, they succeeded in completing a hospitable, large and beautiful church. It has been the centre of the parish life of Sant’Anna district, for 10 years up to now and on April 4, 2015, on the 30th anniversary of the fundation, they have organized a very great feast with sport, cultural and religious events, including the procession which was authorized by the bishop of Trapani mons. Pietro Maria Fragnelli. In 2016 they wanted to repeat this experience, thanks to the parishioners who collaborated with the present parson, Don Franco Finazzo, for the success of the different events.

Description

The interior of the church

In the planning of the overall parish “Gesù Cristo Redentore”, they have followed the guidelines recommended by the Conferenza Episcopale Italiana (Italian Episcopal Conference) in 1993.[1]

The church, in a central position in the district of “Sant’Anna” (in the area of Via Kennedy) is an example of how the use of glued laminated timber allows to link functionality and beauty; it is larger than 600 square metres and, in accordance with the regulations on the removing of architectural barriers, it has a sloping floor towards the Presbytery (architecture), with a declivity which allows an optimal participation to the believers during the liturgical functions.[2]

It is made up of the Presbytery, located in the apse, with a step higher than the hall, the Ambon and the sacramental area, with a wooden dome (in glued laminated timber) above it; the floor here is realized with polychrome marbles and so believers can differentiate the meaning of the different liturgical functions;[3] a central nave, corresponding with the hall, and with about 600 seats, and two aisles for the coming in and out of people, and for the processional route during the functions; the parvis which permits the outdoor celebrations with a great participation of believers, thanks to its position on the top of the staircases.[4] Initially the plan also included the building of the bell tower, with a small dome surmounted by a cross, with seven bronze bells.

The premises for the parish activities include a large hall, in accordance with the regulations on the removing of architectural barriers, which is a little sloping, letting people have a better visual participation, and nine rooms for the catechism lessons. The arcade (architecture), three metres large and around the main structure, is like a covered walkway for people coming out of the hall and the other rooms on the ground floor, from the parvis towards the rectory and the sacristy on the eastern side, and towards the public car-park on the western side.

Finally the open spaces include a car-park, on the south-west side with the access from via Kennedy, a basketball field, and some arranged green areas, where there are plants characteristic of the Mediterranean flora.

File:Cristo Redentore (statua).jpg
Gesù Cristo Redentore (sculptured by Massimiliano Apicella)

Works

There are three very beautiful sculptures made by Massimiliano Apicella from Turin:

Inside the Church there are also these works:

  • the Crucifixion, an icon
  • The Pentecost , a painting by Stefano Papa
  • Our Lady with the Infant Jesus, a painting by Valentina Cavarretta
  • The Divine Mercy, a painting by Enza Ferrera (2006)
  • Gesù Cristo Redentore (Jesus Christ the Redeemer), a plaster statue, used during the procession.
The Altar, made by Massimiliano Apicella

References

Other projects

  • "Alcamo:in corso la festa".
  • "da via Kennedy la prima processione".
  • "Alcamo,1/2/3 aprile festa".
  • "Letture drammatizzate sulla passione di Gesù".