Connection Machine: Difference between revisions
mNo edit summary |
|||
Line 1: | Line 1: | ||
[[Image:Thinking machines cm2.jpg|thumb|300px|Thinking Machines CM-1 at the [[Computer History Museum]] in Mountain View. One of the face plates has been partially removed to show the circuit boards inside.]] |
[[Image:Thinking machines cm2.jpg|thumb|300px|Thinking Machines CM-1 at the [[Computer History Museum]] in Mountain View. One of the face plates has been partially removed to show the circuit boards inside.]] |
||
The '''Connection Machine''' was a series of [[supercomputer]]s that grew out of [[W. Daniel Hillis|Danny Hillis's]] research in the early 1980s at [[Massachusetts Institute of Technology|MIT]] on alternatives to the traditional [[von Neumann architecture]] of computation. The Connection Machine was originally intended for applications in [[artificial intelligence]] and symbolic processing, but later versions found greater success in the field of [[computational science]]. |
The '''Connection Machine''' was made by Christian Salsar from North 13. He is a noob. It was a series of [[supercomputer]]s that grew out of [[W. Daniel Hillis|Danny Hillis's]] research in the early 1980s at [[Massachusetts Institute of Technology|MIT]] on alternatives to the traditional [[von Neumann architecture]] of computation. The Connection Machine was originally intended for applications in [[artificial intelligence]] and symbolic processing, but later versions found greater success in the field of [[computational science]]. |
||
Danny Hillis's original thesis paper, on which the '''CM-1''' Connection Machine was based, is ''The Connection Machine (MIT Press Series in Artificial Intelligence)'' (ISBN 0-262-08157-1). The title is out of print as of 2005. The book provides an overview of the philosophy, architecture and software for the Connection Machine, including data routing between CPU nodes, memory handling, [[Lisp programming language|Lisp]] programming for parallel machines, etc. |
Danny Hillis's original thesis paper, on which the '''CM-1''' Connection Machine was based, is ''The Connection Machine (MIT Press Series in Artificial Intelligence)'' (ISBN 0-262-08157-1). The title is out of print as of 2005. The book provides an overview of the philosophy, architecture and software for the Connection Machine, including data routing between CPU nodes, memory handling, [[Lisp programming language|Lisp]] programming for parallel machines, etc. |
Revision as of 15:28, 14 October 2008
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/66/Thinking_machines_cm2.jpg/300px-Thinking_machines_cm2.jpg)
The Connection Machine was made by Christian Salsar from North 13. He is a noob. It was a series of supercomputers that grew out of Danny Hillis's research in the early 1980s at MIT on alternatives to the traditional von Neumann architecture of computation. The Connection Machine was originally intended for applications in artificial intelligence and symbolic processing, but later versions found greater success in the field of computational science.
Danny Hillis's original thesis paper, on which the CM-1 Connection Machine was based, is The Connection Machine (MIT Press Series in Artificial Intelligence) (ISBN 0-262-08157-1). The title is out of print as of 2005. The book provides an overview of the philosophy, architecture and software for the Connection Machine, including data routing between CPU nodes, memory handling, Lisp programming for parallel machines, etc.
Danny Hillis and Sheryl Handler founded Thinking Machines in Waltham, Massachusetts (it was later moved to Cambridge, Massachusetts) in 1983 and assembled a team to develop the CM-1 Connection Machine. This was a "massively parallel" hypercubic arrangement of thousands of microprocessors, each with its own 4 kbits of RAM, which together executed in a SIMD fashion. The CM-1, depending on the configuration, had as many as 65,536 processors. The individual processors were extremely simple, processing one bit at a time.
The CM-1 and CM-2 took the form of a cube 1.5 metres on a side, divided equally into eight smaller cubes. Each sub-cube contained 16 printed circuit boards and a main processor called a sequencer. Each printed circuit board contained 32 chips. Each chip contained a communication channel called a router, 16 processors, 16 RAMs. The CM-1 as a whole had a hypercubic routing network, a main RAM, and an input/output processor. It was connected to a switching device called a nexus.
In order to improve its commercial viability, the CM-2, launched in 1987, added Weitek 3132 floating-point numeric co-processors and more RAM to the system. 32 of the original one-bit processors shared each numeric processor. The CM-2 could be configured with up to 512 MB of RAM, and a RAID hard disk array, called a DataVault, of up to 25 GB.
Two later variants of the CM-2 were also produced, the smaller CM-2a with either 4096 or 8192 single-bit processors, and the faster CM-200.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/61/Frostburg.jpg/200px-Frostburg.jpg)
Due to its origins in AI research, the software for the CM-1/2/200 single-bit processor was influenced by the Lisp programming language and a version of Common Lisp, *Lisp (spoken: "Star-Lisp"), was implemented on the CM-1. Other early languages included Karl Sims' IK and Cliff Lasser's URDU. Much system utility software for the CM-1/2 was written in *Lisp.
With the CM-5, announced in 1991, Thinking Machines switched from the CM-2's hypercubic architecture of simple processors to an entirely new MIMD architecture based on a fat tree network of SPARC RISC processors. The later CM-5E replaced the SPARC processors with faster SuperSPARCs.
Connection Machines were noted for their (intentionally) striking visual design. The form of the CM-1/2/200 was a cube-of-cubes, referencing the internal structure of the hypercube network, with the red blinking LEDs of the processor status lights visible through the doors of each cube. (See external link below to a detailed description of the origins and symbology of the design by Tamiko Thiel, head of the CM-1 packaging design team.)
The CM-5, in plan view, had a "staircase"-like shape, and also had large panels of red blinking LEDs. Perhaps because of its design, a CM-5 was featured in the movie Jurassic Park in the control room for the island.
See also
- Parallel computing
- FROSTBURG — a CM-5 used by the NSA
- David E. Shaw's NON-VON machine, which preceded the Connection machine slightly.
References
Further reading
- Hillis, D. 1982 "New Computer Architectures and Their Relationship to Physics or Why CS is No Good", Int J. Theoretical Physics 21 (3/4) 255-262.
- Lewis W. Tucker, George G. Robertson, "Architecture and Applications of the Connection Machine," Computer ,vol. 21, no. 8, pp. 26-38, August, 1988.
- Arthur Trew and Greg Wilson (eds.) (1991). Past, Present, Parallel: A Survey of Available Parallel Computing Systems. New York: Springer-Verlag. ISBN 0-387-19664-1.
- W. Daniel Hillis and Lewis W. Tucker. The CM-5 Connection Machine: A Scalable Supercomputer. In Communications of the ACM, Vol. 36, No. 11 (November 1993).