Connection (vector bundle)
In mathematics, a connection on a fiber bundle is a device that defines a notion of parallel transport on the bundle; that is, a way to "connect" or identify fibers over nearby points. If the fiber bundle is a vector bundle, then the notion of parallel transport must be linear. Such a connection is equivalently specified by a covariant derivative, which is an operator that can differentiate sections of that bundle along tangent directions in the base manifold. Connections in this sense generalize, to arbitrary vector bundles, the concept of a linear connection on the tangent bundle of a smooth manifold, and are sometimes known as linear connections. Nonlinear connections are connections that are not necessarily linear in this sense.
This article defines the connection on a vector bundle using one common mathematical notation; however, there are several other more prominent notations in use. One is the notation commonly used in general relativity, using indexed tensors, and another is the notation commonly used in gauge theory, where the endomorphisms of the vector space are emphasized. The differences really are notational, not conceptual, for the most part; the different notations are currently reviewed in the article on the metric connection. That is, the comments made there are generic, applying to vector bundles in general, and not just to metric connections.
such that the Leibniz rule
holds for all smooth functions f on M and all smooth sections σ of E.
If X is a tangent vector field on M (i.e. a section of the tangent bundle TM) one can define a covariant derivative along X
by contracting X with the resulting covariant index in the connection ∇ (i.e. ∇Xσ = (∇σ)(X)). The covariant derivative satisfies the following properties:
Conversely, any operator satisfying the above properties defines a connection on E and a connection in this sense is also known as a covariant derivative on E.
An E-valued 0-form is just a section of the bundle E. That is,
In this notation a connection on E → M is a linear map
A connection may then be viewed as a generalization of the exterior derivative to vector bundle valued forms. In fact, given a connection ∇ on E there is a unique way to extend ∇ to a covariant exterior derivative or exterior covariant derivative
Unlike the ordinary exterior derivative one need not have (d∇)2 = 0. In fact, (d∇)2 is directly related to the curvature of the connection ∇ (see below).
Every vector bundle admits a connection. However, connections are not unique. If ∇1 and ∇2 are two connections on E → M then their difference is a C∞-linear operator. That is,
for all smooth functions f on M and all smooth sections σ of E. It follows that the difference ∇1 − ∇2 is induced by a one-form on M with values in the endomorphism bundle End(E) = E⊗E*:
Conversely, if ∇ is a connection on E and A is a one-form on M with values in End(E), then ∇+A is a connection on E.
In other words, the space of connections on E is an affine space for Ω1(End E).
Relation to principal and Ehresmann connections
Let E → M be a vector bundle of rank k and let F(E) be the principal frame bundle of E. Then a (principal) connection on F(E) induces a connection on E. First note that sections of E are in one-to-one correspondence with right-equivariant maps F(E) → Rk. (This can be seen by considering the pullback of E over F(E) → M, which is isomorphic to the trivial bundle F(E) × Rk.) Given a section σ of E let the corresponding equivariant map be ψ(σ). The covariant derivative on E is then given by
where XH is the horizontal lift of X (recall that the horizontal lift is determined by the connection on F(E)).
Conversely, a connection on E determines a connection on F(E), and these two constructions are mutually inverse.
A connection on E is also determined equivalently by a linear Ehresmann connection on E. This provides one method to construct the associated principal connection.
Let E → M be a vector bundle of rank k, and let U be an open subset of M over which E is trivial. Given a local smooth frame (e1, …,ek) of E over U, any section σ of E can be written as (Einstein notation assumed). A connection on E restricted to U then takes the form
Here ωαβ defines a k × k matrix of one-forms on U. In fact, given any such matrix the above expression defines a connection on E restricted to U. This is because ωαβ determines a one-form ω with values in End(E) and this expression defines ∇ to be the connection d+ω, where d is the trivial connection on E over U defined by differentiating the components of a section using the local frame. In this context ω is sometimes called the connection form of ∇ with respect to the local frame.
If U is a coordinate neighborhood with coordinates (xi) then we can write
Note the mixture of coordinate and fiber indices in this expression. The coefficient functions ωiαβ are tensorial in the index i (they define a one-form) but not in the indices α and β. The transformation law for the fiber indices is more complicated. Let (f1, …,fk) be another smooth local frame over U and let the change of coordinate matrix be denoted t (i.e. fα = eβtβα). The connection matrix with respect to frame (fα) is then given by the matrix expression
Here dt is the matrix of one-forms obtained by taking the exterior derivative of the components of t.
The covariant derivative in the local coordinates and with respect to the local frame field (eα) is given by the expression
Parallel transport and holonomy
for all t ∈ [0, 1]. More formally, one can consider the pullback bundle γ*E of E by γ. This is a vector bundle over [0, 1] with fiber Eγ(t) over t ∈ [0, 1]. The connection ∇ on E pulls back to a connection on γ*E. A section σ of γ*E is parallel if and only if γ*∇(σ) = 0.
Suppose γ is a path from x to y in M. The above equation defining parallel sections is a first-order ordinary differential equation (cf. local expression above) and so has a unique solution for each possible initial condition. That is, for each vector v in Ex there exists a unique parallel section σ of γ*E with σ(0) = v. Define a parallel transport map
by τγ(v) = σ(1). It can be shown that τγ is a linear isomorphism.
Parallel transport can be used to define the holonomy group of the connection ∇ based at a point x in M. This is the subgroup of GL(Ex) consisting of all parallel transport maps coming from loops based at x:
The holonomy group of a connection is intimately related to the curvature of the connection (AmbroseSinger 1953).
The curvature of a connection ∇ on E → M is a 2-form F∇ on M with values in the endomorphism bundle End(E) = E⊗E*. That is,
It is defined by the expression
where X and Y are tangent vector fields on M and s is a section of E. One must check that F∇ is C∞-linear in both X and Y and that it does in fact define a bundle endomorphism of E.
As mentioned above, the covariant exterior derivative d∇ need not square to zero when acting on E-valued forms. The operator (d∇)2 is, however, strictly tensorial (i.e. C∞-linear). This implies that it is induced from a 2-form with values in End(E). This 2-form is precisely the curvature form given above. For an E-valued form σ we have
A flat connection is one whose curvature form vanishes identically.
- A classical covariant derivative or affine connection defines a connection on the tangent bundle of M, or more generally on any tensor bundle formed by taking tensor products of the tangent bundle with itself and its dual.
- A connection on can be described explicitly as the operator
where is the exterior derivative evaluated on vector-valued smooth functions and are smooth. A section may be identified with a map , and then
- If the base space of the bundle has a metric, then it can be extended to the entire vector bundle, giving a bundle metric. Then, the metric connection is defined as a connection on the vector bundle that is compatible with the underlying bundle metric.
- The Yang-Mills connection is a special case of a metric connection: it is a metric connection that satisfies the Yang-Mills equations of motion.
- The Riemannian connection is a special case of a metric connection: it is a metric connection on the tangent bundle of a Riemannian manifold.
- The Levi-Civita connection is a special case of a Riemann connection: it is the (unique) connection that is also torsion-free. It is unique, in the sense that given some Riemannian connection, one can always find an (equivalent) connection that is torsion-free, and there is only one such connection. It is equivalent in the sense that it is compatible with the same metric, although, in general, the curvature tensors will be different; see, for example, teleparallelism for a discussion of the general case. The difference between a Riemannian connection and the corresponding Levi-Civita connection is given by the contorsion tensor.
- The exterior derivative is a flat connection on E = M × R (the trivial line bundle over M).
- More generally, there is a canonical flat connection on any flat vector bundle (i.e. a vector bundle whose transition functions are all constant) which is given by the exterior derivative in any trivialization.
- Chern, Shiing-Shen (1951), Topics in Differential Geometry, Institute for Advanced Study, mimeographed lecture notes
- Darling, R. W. R. (1994), Differential Forms and Connections, Cambridge, UK: Cambridge University Press, ISBN 0-521-46800-0
- Kobayashi, Shoshichi; Nomizu, Katsumi (1996) , Foundations of Differential Geometry, Vol. 1, Wiley Classics Library, New York: Wiley Interscience, ISBN 0-471-15733-3
- Koszul, J. L. (1950), "Homologie et cohomologie des algebres de Lie", Bulletin de la Société Mathématique, 78: 65–127
- Wells, R.O. (1973), Differential analysis on complex manifolds, Springer-Verlag, ISBN 0-387-90419-0
- Ambrose, W.; Singer, I.M. (1953), "A theorem on holonomy", Transactions of the American Mathematical Society, 75: 428–443, doi:10.2307/1990721