|This article needs additional citations for verification. (December 2007) (Learn how and when to remove this template message)|
Counter-battery fire (sometimes called counter-fire) is a battlefield military activity to defeat the enemy's indirect fire elements (guns, rocket launchers, artillery and mortars), including their target acquisition, command and control components. Counter-battery arrangements and responsibilities vary between nations but involve target acquisition, planning and control, and counter-fire. Counter-battery fire rose to prominence in World War I.
Counter-battery radar detects incoming indirect fire and calculates where it was fired from. That location data can be sent by a communications link to friendly forces, who can then fire on the enemy positions, hopefully before they can reposition (the "scoot" part of shoot and scoot tactics). Counter-RAM systems track incoming rocket, artillery, and mortar fire and attempt to intercept and destroy the projectiles or provide early warning to the target area.
Indirect fire was introduced so that artillery could fire from behind cover to reduce its exposure to enemy artillery by making itself more difficult to find. Interestingly, while armies were doing this, little thought was given to the need for counter-counter measures. Perhaps the only means of finding concealed guns was observation from kites or balloons. However, effective counter-battery fire needs far more than a single method of observation. Counter-battery (CB) fire emerged and developed extremely quickly during World War I. Since that war, CB has continued to evolve, mainly due to improvements in technology.
The targets of CB fire are usually the enemy's guns, launchers and mortars, both the materiel and the men serving them. The formal NATO definition of the term counter-battery is "fire delivered for the purpose of destroying or neutralising the enemy's fire support system", with the note that it may be proactive or reactive. This may be achieved by attacks on any part of the field artillery system. In some armies at some periods CB has been called 'counter-bombardment' and occasionally 'counter-mortar' has been handled somewhat separately.
There are four functions in the system for CB fire:
- Target acquisition
- CB Intelligence
- CB fire control
- CB fire units
Target acquisition is the source of information for CB intelligence. It may produce accurate locations for enemy fire units or merely inputs to a more complex process for locating and assessing hostile artillery. At the end of World War I, the following were recognised as the principal sources of artillery intelligence, this seems to be in descending order of usefulness:
- Aeroplanes (i.e., visual observation)
- Aeroplane photography
- Survey sections (i.e., flash spotting)
- Sound ranging sections
- Balloon observation
- Ground observers (artillery and 'intelligence posts of other arms')
- Liaison officers (artillery at infantry brigade HQs, these obtained reports of enemy artillery activity)
- Officers' patrols
- Secret agents and epatries
- Captured documents and prisoner's statements
- Listening sets (i.e., monitoring enemy communications)
- Intercepted wireless (by 'wireless compass stations')
Apart from balloons and officers' patrols, these sources continued to play their part in World War II, and their technology improved, although flash spotting became less useful as ranges increased and flashless (or low flash) propellants became widespread. A successor to officers' patrols had an isolated emergence in Italy when Canadian artillery observers were put ashore behind German lines and established themselves to observe gun positions.
Sound ranging and flash spotting both required enemy guns to fire. Furthermore, others, such as radio direction finding and information from prisoners, are insufficiently precise to 'fix' a target for artillery attack. Information from others may not be received quickly and hence be out of date, the hostile battery having moved.
These methods were joined by radar in World War II; while this could detect a shell in flight the gun that fired it could not usually be seen and the shell's elliptical trajectory made it impossible to extrapolate backwards with the technology of that time. However, mortar bombs have a parabolic trajectory (as do guns firing in 'high angle') defined by a simple mathematical equation with two points on the parabolic curve. It was therefore possible to deduce a mortar's position by tracking its bomb and recording two points on its trajectory. Another method that emerged was crater examination, this could reveal the azimuth back to the hostile gun or mortar and study of fragments could reveal its type. However, while it was a useful source of information it was not sufficiently accurate to give a location for the firer.
Most armies abandoned flash spotting in the 1950s. However, several new target acquisition technologies emerged. These included:
- UAVs, about 1960 an Unmanned Air Vehicle, the SD-1, entered artillery service. This early UAV used wet film photography by day or night, had short range and short endurance. However, being under artillery control they were responsive to CB needs, which was just as well because other forms of air reconnaissance were becoming less available and were not notably timely. Other UAVs, including drones (flying a programmed course) duly emerged, including the ability to transmit imagery in real-time.
- Next, in the 1970s Hughes Aircraft developed the US Firefinder RADAR system and created the algorithms that could extrapolate a gun's position from a segment of an elliptic trajectory. It's likely the Soviet Union created similar algorithms.
- Non-communications ELINT, which can detect and locate radars, including those used by artillery is an often overlooked source.
- A few armies established artillery observation patrol units to operate in likely artillery deployment areas behind the enemy's forward units.
- On the modern battlefield various radars are able to detect vehicles or stationary guns on the ground, although this is far from a perfect information source. Look-down radar from high altitude aircraft are able to detect vehicles over a very wide range, but are unable to determine what type of vehicles they are and are susceptible to radar reflectors and similar countermeasures. The information is useful but requires further sources of information to accurately determine which contacts are the target. Millimeter wave radar (such as the AH-64 Apache's Longbow Radar) are able to very accurately detect the types of vehicles observed but are much shorter ranged.
- The arrival of highly networked combat systems allows for data from multiple sources to be cross referenced very quickly. As a result, modern counter battery fire is generally as a result of a wide array of different possible information sources working together to provide targets in close to real time.
- Sound ranging systems have also evolved with newer technology, such as Hostile Artillery Locating (HALO) and similar systems developed in other countries.
CB Intelligence applies the intelligence cycle and principles to CB. It uses information about hostile artillery from all sources to maintain detailed records and apply specialist techniques that exploit the nature of artillery fire to produce:
- Intelligence about hostile artillery positions
- The enemy artillery order of battle
- Intelligence about hostile artillery activity and deployment and assessments of its wider implications
CB Intelligence is usually combined with CB fire control (see below), although intelligence purists recognise this is not good practice and the two were separate in the British forces in France in World War I. In both World Wars CB intelligence and CB control were found to be most effective when they were at corps level. However, the final year of World War 2 showed that the counter mortar battle was really one for brigade level. Since that war CB has tended to move to lower levels and in some armies has grown into a wider deep supporting fire organisation.
CB fire control
The CB fire control problem is that it does not always make tactical sense to attack hostile batteries the moment they are located. This is magnified by the challenges of targeting hostile batteries. There are many factors, and their significance depends on the circumstances. The first issue, for targeting, is that historically it's difficult to 'knock-out' a battery, although smart munitions against SP guns may change this. That highlights the point that it is important to be clear what result is wanted from CB fire. As the quoted definition states 'Destroy' is one possibility, another is Neutralization to render the battery temporarily ineffective or unusable, including by suppressing it or forcing it to move. However, suppression only lasts while CB fire is falling and if a hostile battery moves then it has to be found again. It's important to get the result that best fits the tactical situation, and sometimes it is best just to record the location of the hostile battery and leave it for later. Good CB officers are cunning and wily tacticians.
An additional issue for the use of counter battery fire is the finite artillery resources available for use in a given situation. Firing on enemy artillery is one use of those resources, but more traditional uses such as shelling the enemy as they advance are often much more attractive simply because while artillery is an effective weapon, it cannot directly capture territory or destroy forces en masse.
CB fire units
The final aspect of the CB equation is having available CB fire units and appropriate munitions. Typically these are general supporting fire units, but direct supporting fire units are also used if they are available and not fully occupied by their primary role. With conventional HE shells it may require the concentrated fire of 5–10 batteries to deal effectively with one hostile battery. Hence the attraction multi-rocket launchers such as MLRS able to deliver a heavy and concentrated attack from relatively few launchers.
Counter-measures to CB fire have emerged throughout history. These include:
- Digging in. In World War I, even heavy artillery was dug-in with several feet of overhead protection. Even today North Korean artillery is widely thought to be somewhat resistant to CB fire because of its deeply entrenched positions. More generally precision munitions have decreased the value of digging.
- Encasing guns in armour. Fully armoured self-propelled guns were introduced to provide protection against conventional HE (High Explosive) fire.
- Shoot-and-scoot tactics, in which a self-propelled artillery vehicle or towed gun fires a single round or salvo and immediately begins moving. Shoot-and-scoot tactics were first used in World War II by Soviet Katyusha rocket launchers.
- Spreading-out. Increasing the dispersion of guns in a position has been aided by computers for technical fire control. Introduction of guns with self-survey and orientation has led to the concept of "gun manoeuvre areas" where the troops, platoons or sections of a battery keep moving around, although it is questionable how sustainable this is.
- Concealment. While firing guns cannot escape sound-ranging and radar detection, concealment and deception can reduce the likelihood of discovery from other methods.
- Counter-battery fire, being prepared to reply to enemy counter-battery fire with counter-battery fire of your own.
- Human shields. The practice of embedding artillery assets within a civilian population to discourage enemy counter-battery fire, based on the assumption that a counter-battery strike would damage and destroy civilian infrastructures as well as killing innocent non-combatants.
Of course there are many potential target "nodes" in the field artillery system, including those dedicated to finding hostile artillery. Attacking these may significantly blind the enemy's CB capability—counter-countermeasures.
- AMOS or Advanced MOrtar System
- Artillery Surveillance and Target Acquisition
- Counter-battery radar
- Counter Rocket, Artillery, and Mortar
- flash spotting
Citations and notes
- Peter Chasseaud
- Farndale pp. 333-335
- pp. 160-71, McNaughton
- Colonel GWL Nicholson, The Gunners of Canada, History of the Royal Regiment of Canadian Artillery Vol 2, McClelland & Stewart Ltd, Toronto/Montral, 1972, pg 240
- General Sir Martin Farndale History of the Royal Regiment of Artillery - Western Front 1914-18
- Maj Gen AGL McNaughton The Development of Artillery in the Great War, Canadian Defence Quarterly Vol 6 No 2, January 1929
- Peter Chasseaud Artillery's Astrologers: A History of British Survey and Mapping on the Western Front, 1914-1918
- NATO AAP-6 NATO Glossary of Terms and Definitions