S3 Texture Compression
S3 Texture Compression (S3TC) (sometimes also called DXTn or DXTC) is a group of related lossy texture compression algorithms originally developed by Iourcha et al. of S3 Graphics, Ltd. for use in their Savage 3D computer graphics accelerator. The method of compression is strikingly similar to the previously published Color Cell Compression, which is in turn an adaptation of Block Truncation Coding published in the late 1970s. Unlike some image compression algorithms (e.g. JPEG), S3TC's fixed-rate data compression coupled with the single memory access (cf. Color Cell Compression and some VQ-based schemes) made it well-suited for use in compressing textures in hardware-accelerated 3D computer graphics. Its subsequent inclusion in Microsoft's DirectX 6.0 and OpenGL 1.3 (via the GL_EXT_texture_compression_s3tc extension) led to widespread adoption of the technology among hardware and software makers. While S3 Graphics is no longer a competitor in the graphics accelerator market, license fees are still levied and collected for the use of S3TC technology, for example in game consoles and graphics cards. The wide use of S3TC has led to a de facto requirement for OpenGL drivers to support it, but the patent-encumbered status of S3TC presents a major obstacle to open source implementations, while implementation approaches which try to avoid the patented parts exist.
The patent on S3 Texture Compression expires on October 2, 2017.
There are five variations of the S3TC algorithm (named DXT1 through DXT5, referring to the FourCC code assigned by Microsoft to each format), each designed for specific types of image data. All convert a 4×4 block of pixels to a 64-bit or 128-bit quantity, resulting in compression ratios of 6:1 with 24-bit RGB input data or 4:1 with 32-bit RGBA input data. S3TC is a lossy compression algorithm, resulting in image quality degradation, an effect which is minimized by the ability to increase texture resolutions while maintaining the same memory requirements. Hand-drawn cartoon-like images do not compress well, nor do normal map data, both of which usually generate artifacts. ATI's 3Dc compression algorithm is a modification of DXT5 designed to overcome S3TC's shortcomings with regard to normal maps. id Software worked around the normalmap compression issues in Doom 3 by moving the red component into the alpha channel before compression and moving it back during rendering in the pixel shader.
Like many modern image compression algorithms, S3TC only specifies the method used to decompress images, allowing implementers to design the compression algorithm to suit their specific needs, although the patent still covers compression algorithms. The nVidia GeForce 256 through to GeForce 4 cards also used 16-bit interpolation to render DXT1 textures, which resulted in banding when unpacking textures with color gradients. Again, this created an unfavorable impression of texture compression, not related to the fundamentals of the codec itself.
DXT1 (also known as Block Compression 1 or BC1) is the smallest variation of S3TC, storing 16 input pixels in 64 bits of output, consisting of two 16-bit RGB 5:6:5 color values and , and a 4x4 two bit lookup table.
Otherwise, if , then and is transparent black corresponding to a premultiplied alpha format.
The lookup table is then consulted to determine the color value for each pixel, with a value of 0 corresponding to and a value of 3 corresponding to .
DXT2 and DXT3
DXT2 and DXT3 (collectively also known as Block Compression 2 or BC2) converts 16 input pixels (corresponding to a 4x4 pixel block) into 128 bits of output, consisting of 64 bits of alpha channel data (4 bits for each pixel) followed by 64 bits of color data, encoded the same way as DXT1 (with the exception that the 4 color version of the DXT1 algorithm is always used instead of deciding which version to use based on the relative values of and ).
In DXT2, the color data is interpreted as being premultiplied by alpha, in DXT3 it is interpreted as not having been premultiplied by alpha. Typically DXT2/3 are well suited to images with sharp alpha transitions, between translucent and opaque areas.
DXT4 and DXT5
DXT4 and DXT5 (collectively also known as Block Compression 3 or BC3) converts 16 input pixels into 128 bits of output, consisting of 64 bits of alpha channel data (two 8 bit alpha values and a 4x4 3 bit lookup table) followed by 64 bits of color data (encoded the same way as DXT1).
If , then six other alpha values are calculated, such that , , , , , and .
Otherwise, if , four other alpha values are calculated such that , , , and with and .
The lookup table is then consulted to determine the alpha value for each pixel, with a value of 0 corresponding to and a value of 7 corresponding to . DXT4's color data is premultiplied by alpha, whereas DXT5's is not. Because DXT4/5 use an interpolated alpha scheme, they generally produce superior results for alpha (transparency) gradients than DXT2/3.
S3TC Format Comparison
|FOURCC||DX 10 Name||Description||Alpha premultiplied?||Compression ratio||Texture Type|
|DXT1||BC1||1-bit Alpha / Opaque||Yes||6:1(for 24 bit source image)||Simple non-alpha|
|DXT2||BC2||Explicit alpha||Yes||4:1||Sharp alpha|
|DXT3||BC2||Explicit alpha||No||4:1||Sharp alpha|
|DXT4||BC3||Interpolated alpha||Yes||4:1||Gradient alpha|
|DXT5||BC3||Interpolated alpha||No||4:1||Gradient alpha|
- S2TC, patentless workaround
- DirectDraw Surface
- Adaptive Scalable Texture Compression (ASTC)
- Ericsson Texture Compression (ETC1 & ETC2)
- US 5956431 "Fixed-rate block-based image compression with inferred pixel values"
- "1990 IEEE Color Cell Compression Paper" (PDF). Ieeexplore.ieee.org. Retrieved 2012-01-25.
- "S3TC situation on official DRI information page". Dri.freedesktop.org. Retrieved 2012-01-25.
- S2TC: A Possible Workaround For The S3TC Patent Situation on phoronix
- Yates, Tom (2017-02-15). "This is why I drink: a discussion of Fedora's legal state". LWN.net. Retrieved 2017-02-16.
... The patent on S3 texture compression expires on October 2, 2017, so Steam games might work better on Fedora after that date. ...
- "DOOM 3 Video Requirements". Gamershell.com. Retrieved 2012-01-25.
- Togni, Roberto, et al. "Apple RPZA". MultimediaWiki.
||This section's use of external links may not follow Wikipedia's policies or guidelines. (February 2017) (Learn how and when to remove this template message)|
- Microsoft Developer Network article on Block Compression in Direct3D 10
- squish, an MIT-licensed S3TC compressor. The site also contains an article giving an introduction to compression algorithms.
- Comparison between S3TC and FXT1 texture compression
- The Truth about S3TC Note: This article used an early S3TC compression engine, not nVidia's or ATI's updated codecs.
- Texture compression survey
- A fast, SSE2-enabled DXT1/5 compressor by Intel