Five-pin bowling

A boy five-pin bowling

Five-pin bowling is a bowling variant which is played only in Canada, where many bowling alleys offer it, either alone or in combination with ten-pin bowling. It was devised around 1909 by Thomas F. Ryan in Toronto, Ontario, at his Toronto Bowling Club, in response to customers who complained that the ten-pin game was too strenuous. He cut five tenpins down to about 75% of their size, and used hand-sized hard rubber balls, thus inventing the original version of five-pin bowling.

Gameplay

The balls in five pin bowling are small enough to fit in the hand and therefore typically have no fingerholes, although EPCO now produces balls with thumb holes which the C5PBA have approved in their Standards and Specifications. At the end of the lane there are five pins arranged in a V. In size they are midway between duckpins and ten pins, and they have a heavy rubber band around their middles, similar to the pins used in the rarely seen "rubberband duckpin" form of duckpin bowling, to make them move farther when struck. Unlike any other form of bowling popular in North America, the pins in five-pin bowling are worth different scoring point values, depending on their location in the V-formation. The centre pin is worth five points if knocked down, those on either side, three each, and the outermost pins, two each, giving a total of 15 in each frame.

In each frame, each player gets three attempts to knock all five pins over. Knocking all five pins down with the first ball is a strike, worth 15 points, which means the score achieved by the player's first two balls of the next frame or frames are added to his or her score for the strike. They are also, of course, counted in their own frames, so in effect they count double. A player who takes two balls to knock all the pins down gets a spare, which means the first ball of the next frame counts double. When a bowler bowls two strikes in succession, within a game, the bowler has scored a "double". The count in the frame where the first strike was bowled is left blank until the bowler makes his or her first delivery of the next frame. When a double has been bowled, the count for the first strike is 30 points plus the value of the pins bowled down with the first ball of the frame following the second strike. When a bowler bowls three strikes in succession, within a game, the bowler has scored a "triple" (also called a "turkey"). In scoring three successive strikes, the bowler is credited with 45 points in the frame where the first strike was bowled. As in ten-pin, if either of these happen in the last frame, the player gets to take one or two shots at a re-racked set of pins immediately.

A perfect score is 450, requiring 12 consecutive strikes bowled in the same game without fouling. It does not happen as frequently as in tenpin bowling. The Canadian 5 Pin Bowlers Association sanctions from 15 to 30 perfect games annually.

Until 1967, an eastern Canadian bowler was required to knock down the left corner ("counter") pin to score any points, while a western bowler was required to knock down the right corner pin. The values of the pins were changed in the same year to the current values.

Five-pin bowling allows for more strategy in its play than the ten-pin variant, because of the differing point values for each pin. For example: If a player fails to score a strike in 10-pin bowling, it is less important how the player chooses to resolve the remaining pins, as all pins are valued the same, and knocking down more results in higher points. In five-pin bowling on the other hand, if a player misses a strike, he or she has to make a strategic decision as to which set of remaining pins they should attempt to knock down (beyond simply trying for them all), which allows players a means to minimize their losses after a mistake, by aiming for the higher-scoring group of pins, or for the lower but perhaps more easily struck group.

Five pin bowling terminology

Five pin bowlers use a number of terms to denote the results of a throw:

• "[number]-pack": Term for a number of consecutive strikes; e.g. six consecutive strikes is a "six-pack". Also referred to as "[number]-bagger" (e.g. six-bagger).
• "10 the hard way": After the third ball, having a frame score of 10 where the remaining pins are a 3-pin and a 2-pin that are not "neighbours".
• "Aces" (A): taking out the headpin and both three pins but leaving the two corner pins. Also referred to as "bed posts" or "goal posts".
• "Chop" or "chop-off" (denoted ℅): Hitting the headpin and the 3 and 2 pins on one side on the first ball, leaving the other 3 and 2 pins on the other side.
• "Clean game": Finishing a game with a strike or spare in every frame.
• "Corner-pin": Leaving only the left corner pin or right corner pin standing on the first ball is denoted by an "L" or an "R" respectively on a score sheet.
• "Fifteen": When all pins are knocked down after the third ball. Also referred to as a "clean up".
• "Headpin" (denoted H on a score sheet): punching out the headpin on the first ball. This is the most dreaded result on the first ball, as converting the spare resulting from punching out the headpin (a "headpin-spare") is extremely difficult to achieve.
• "Punch": Hitting only one pin when two or more pins are remaining (commonly known as a "cherry" on the 2nd or 3rd ball)
• "Split" (S): Taking out the headpin and one of the three-pins, scoring 8 on the first ball. Difficult to obtain a spare on the second ball but if accomplished, this is known as a "split-spare". Many bowling associations will offer a special pin for this achievement.
• "Strike out": Finishing the game with Three or more strikes.
• "Turkey": Three consecutive strikes
• "Wood" or "deadwood": The pins left on the lane, usually after throwing the first two balls of a frame. This originates from when bowling pins were typically made of wood and not acrylic.

Mechanics of the game (pin-setting)

All modern bowling centres use automated pin-setting machines (first used in 1957) to reset the pins after each ball is thrown. In five-pin, two types of pinsetters are used—"string" and "free fall".

The "string" pinsetter is known for each pin having a string attached to the head. These pinsetters were first invented in 1963 and are characterized by a string being attached to the head of each pin. This type of pinsetter has a low operating cost, so it is the most commonly used type of pinsetter. There are three families of string pinsetters.

• The PBS family of pinsetters are the most frequently used, and many consider the PBS as the workhorse of the industry. The PBS family includes models made by Schmid & Company (sometimes branded as BowlOMatic) as well as the CA-1. These machines are straight electrical and do not require air compressors unlike pneumatic machines. The Schmid machines ran using relays while the CA-1 used circuit boards. The PBS brand was bought out by Brunswick, who introduced a second generation Schmid pinsetter dubbed the 81-5 as well as a 10-pin string pinsetter and a convertible five-ten pin machine marketed as the Chamelion.
• The Mendes family of string pinsetters is not as common as the PBS family. Mendes machines are easily spotted for its shield that descends on a hinge like a closing door. The machine may immediately start up if all the pins are knocked down. The early Mendes string pinsetters were pneumatic. They released an electrical version of the machine known as the ME90. Mendes was bought out by Qubica—now QubicaAMF Worldwide. The machine is now marketed by QubicaAMF under the TMS name. These machines are available for five and ten pin, but there is no convertible version.
• A third family of pinsetter was recently released into the market by Paule Systems. The machine—marketed as the Merlin—is a convertible five/ten pin string pinsetter that uses 15 strings. The changeover time of this machine is quick. The PBS version uses 12 strings—a changeover requires the headpin and the two corners to be restrung.

The most common stop on string pinsetters is a string tangle.

The "free fall" pinsetter works like ten-pin. A reset is completed by sweeping the old pins off the pindeck and setting a fresh set of pins in its place. The swept pins are elevated back to the top to create the next setup. Free fall pinsetters for 5-pin are no longer made due to high operation and maintenance costs.

There were three common types of free fall pinsetters:

• The Double Diamond was the first pinsetter invented for five-pin. This pneumatic machine was characterized by a sweep that did not stay descended while the pin table was moving. The pin table is similar to a candlepin tube board with a protective front plate that was often used for advertising. This machine was known for many peculiar sounds; including a hiss on the descent of the pin table and a "clang" when the pin table is hit by a pin. The elevator and pit floor is similar to the Brunswick GSX. The pins and balls are elevated to an upper carousel, where the balls are separated from the pins. When five pins are aligned in the carousel, they are lowered into five chutes leading to each pin position. The machine is loaded with 21 to 22 pins.
• Brunswick offered free-fall machines for five-pin before buying out PBS. To the average bowler, the machine has a look and behavior similar to tenpin's A-2 pinsetter. There were two models, each having a different type of elevator. The A-50 used two different belts to grip pins and balls. The A-51 used an oval shaped elevator. Most lanes equipped with these machines have been upgraded to string pinsetters.
• A less commonly found machine was the Strickland pinsetter—a pneumatic machine characterized by separate pinsetting and pin pickup tables. Its behavior is similar to the A-2. On a reset, it can be difficult to see the actual pinsetting table. The pins rest on forks on the pin table. When the pins reach the deck, the pinsetting table shifts back several inches before rising back to its position. When the pins are cycled back to the top, they actually hang from supporting forks positioned such that the next rack of pins is in position. The pinsetting table then rises to pick up the hanging pins. The elevator for this machine is oval in shape. When balls reach the top of the elevator, gravity takes the ball to the ball track.

Bowlers must initiate all free-fall pinsetter cycles. The five-pin free-fall pinsetter does not automatically react to a ball rolled or pin knocked down. When bowling on free fall pinsetters, the bowler would have to press a button to initiate a pick-up cycle to clear downed pins lying on the pin deck. If automatic scoring is in use, all automatic resets are actually initiated by the scoring computers.

The lower operating and maintenance costs of the string pinsetter eventually led to the demise of free-fall pinsetters. When a bowling centre retires free-fall pinsetters, the old machines are usually bought by other free-fall equipped bowling centres and are disassembled for parts.

Free fall pinsetters are still in service in some bowling centres in British Columbia, Manitoba, Ontario, and Quebec. There is one bowling center in St. Catharines, Ontario that runs Strickland pinsetters while most of the remaining free fall pinsetters are Double Diamond.

Major tournaments

There are three groups overseeing the major tournaments in five pin bowling.

• Canadian Five Pin Bowler's Association (C5PBA): The C5PBA is the body that governs the rules and regulations of the game. The C5PBA operates three major national tournaments. The showcase tournament is the "Open", a scratch tournament that involves both teams and singles. The national finals of the Open span three to four days and culminate with a stepladder format to determine national champions in men's singles, women's singles, men's teams, women's teams, and mixed teams. There is a second tournament known as The Youth Challenge, which is shorter than the Open in length, but involves a similar format to the Open. The Inter-Provincial, which replaced the High Low Doubles, became a national event in 2008 and is pins over average format.
• Bowling Proprietors Association of Canada (BPAC): The BPAC is the body that represents the bowling centre owners. The BPAC oversees Youth Bowling Canada (YBC) and Club 55+ (formerly the Golden Age Bowler's Club). Both organizations feature national championships. The YBC national championship is known as the "Four Steps to Stardom" while the Club 55+ national championship is known as the "Team Triples". The BPAC also runs the National Classified Championships, a scratch tournament where bowlers are qualify through their bowling centre within average categories. The BPAC runs the Canadian qualifying for the AMF World Cup and the various five-pin TV shows such as CBC's Championship Five Pin Bowling and the TSN Pins Game. In 2006, the CBC series and the TSN series were consolidated into one tournament, the Canadian Bowling Championships. As of 2009, TSN dropped the Canadian Bowling Championships from its televised schedule.
• The Master Bowlers Association of Canada: The MBAC is a unique organization that serves as the technical branch of the sport and provides a single national championship with both total pinfall and pins over average divisions. A third branch of this organization involves the Seniors Division (over 55yrs). Typically the Teaching and Senior Division bowlers hold mid- to lower-range bowling averages. Bowlers in the Teaching Division are required to serve as coaches in the YBC (Youth Bowling Canada). The Master Bowlers operate under a strict dress code including a standard shirt in the provincial colours with the bowler's name embroidered on the back.

Qualifying for a national championship usually requires three qualifying rounds.

• League, House or Centre round: for most provinces, this is usually not required for the C5PBA Open or C5PBA Youth Challenge.
• Zone round: the number of centres in each zone varies, but the zones are set up geographically. In some provinces and tournaments, the zone round may be bypassed.
• Provincial championships: the winners of the zone round qualify for the provincial finals. For most tournaments, Ontario runs two provincial finals—a north provincial (Northern Ontario) and a south provincial (Southern Ontario).

Each province also offers a number of tournaments that conclude with the provincial finals. The tournaments, formats and prize offerings vary by province. These tournaments are operated through the Provincial Bowling Proprietors Association, local and provincial five pin associations, and individual bowling centres.

• Western Canadian Bowling Tour has grown in size and now has 4 major cash tournaments. 'Autumn Open in Calgary, Alberta held at Paradise Lanes. TPC at Sherwood in Sherwood Park, Alberta held at Sherwood Lanes. Regina Classic in Regina, Saskatchewan held at Goldenmile Bowl. As well as the Traditional Open in Red Deer, Alberta held at Heritage Lanes. These cash tournaments regularly have 100+ competitors and as many as 195 entries making them extremely hard to win and the competition to be some of the very best 5 Pin Bowling has to offer.5 Pin Universe

Facts and figures

• At first, bowling pins used in five-pin were made of plastic-coated maple. Today's pins are made of a hard plastic and often feature UV-glow capability for black light glow bowling operations. The pin makes a "clack" sound when hit by the ball. The base of the plastic pin can be separated from the rest of the pin. The neck stripes on plastic pins are actually a red plastic tape that wears off with use and can be replaced. In 2011, the C5PBA approved a new pin base. The new base adds 1/8 inch of height to the pin, raises the pin's center of gravity, and lowers the contact area with the lane. This new base has a dark color, so pins with the new base may appear to the bowler as floating above the lane.
• In 1990, the Canadian 5 Pin Bowlers Association sanctioned the use of personalized bowling balls. Before then, only bowling balls supplied by the bowling centre were allowed to be used.
• Many five pin tournaments scored by handicap usually use a scoring basis of "pins over average", which is the difference between the outcome of a game and the bowler's established average. It accumulates over the number of games bowled. This statistic can be negative.
• Several popular automatic scoring systems have five pin versions. On most string type pinsetters, automatic scoring equipment is connected directly to the pinsetter circuitry. Scoring cameras can be used on both types of pinsetting installations. Most systems mount the camera mounted between lanes as in tenpin; however the ProScore system—when installed on free-fall—reads scores using a set of five electronic eyes mounted above the pindeck.
• Bowling centres with convertible pinsetters usually will set specific hours as to when their convertible lanes will support five-pin or ten-pin. Convertible machines may support duckpin bowling instead of ten-pin when in ten-pin mode. String pinsetters are not sanctioned by the USBC for ten-pin play, partially because a "stringsetter" cannot handle an "off-spot" pin situation.
• Some five-pin centres have installed lane protection devices. The device is a sheet of plexiglas mounted vertically about six inches (15 cm) above the lane and is located just past the target arrows on the lane. This device discourages bowlers from lofting the ball and damaging the lane—which is more prevalent in small ball bowling. A ball that knocks the plexiglas loose or flies over the plexiglas guard is worth zero points under C5PBA rules.
• A foul line violation in five-pin results in a 15-point penalty. Pins knocked over during a violating delivery count. The penalty is assessed at the end of the game. This compares to a zero score for the ball in other bowling disciplines.
• Some believe that the hockey term "five-hole" (the space between the goaltender's legs) is taken from five-pin bowling. Knocking out the headpin (worth 5 points) by itself leaves a large hole through which it is easy to put the next one or two balls without hitting anything.
• Five-pin bowling is played in all Canadian provinces and territories. However, in Quebec, New Brunswick and Nova Scotia, unlike in the rest of the country, five-pin is not the dominant form of bowling played in these provinces. In Quebec, five-pin is known as "cinq quilles" (five pins) in French, while "Petite Quilles" refers to the duckpin game. There is only one five-pin bowling alley in all of New Brunswick, whereas in Nova Scotia, the Worcester, Massachusetts–originated sport of candlepin bowling is more popular given that five-pin bowling alleys are located primarily on army bases. Nunavut has only one five-pin bowling alley. It is a two-lane facility located at CFB Alert and also happens to be the world's most northerly bowling lanes. As a result, this alley is only accessible to military personnel and visitors to the base. There are not any bowling facilities of any type located in any civilian Nunaviamut community.
• Five-pin bowling was one of four sports featured on the Canadian Inventions: Sports series issued by Canada Post stamps on August 10, 2009.
• In 2007, five-pin bowling was ranked #4 during the CBC miniseries The Greatest Canadian Invention.

See also

• Bowling
• Thomas F. Ryan
• Youth Bowling Canada

Further reading

• Marlow, Iain (January 12, 2009). "Fans have a ball at five-pin bowling". Toronto Star.
• Five-Pin Bowling Timeline

External links

• 5 Pin Bowling Techniques
• 5 Pin bowling terms
• Canadian 5 Pin Bowlers Association
• Youth Bowling Canada in Ottawa