Jump to content

Automotive fuse

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Rich Farmbrough (talk | contribs) at 22:34, 26 February 2016 (External links). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Blade type fuses come in six physical sizes: micro2, micro3, low-profile mini, mini, regular, and maxi

Automotive fuses are a class of fuses used to protect the wiring and electrical equipment for vehicles. They are generally rated for circuits no higher than 24 volts direct current, but some types are rated for 42-volt electrical systems. They are occasionally used in non-automotive electrical products.

Blade type

Blade fuses (also called spade or plug-in fuses), with a plastic body and two prongs that fit into sockets, are mostly used in automobiles. Each fuse is printed with the rated current in amperes on the top. These types of fuses come in six different physical dimensions:

  • micro2, micro3, low-profile mini (APS),
  • mini (APM / ATM)
  • regular (APR / ATC / ATO)
  • maxi (APX) heavy-duty.

Unofficially, the APS fuse is sometimes called "micro" since the term means smaller than mini, but recently fuses using the micro name have been released. Regular blade-type fuses, also known as standard fuses, were developed in 1976 for low voltage use in motor vehicles. The mini fuses were developed in the 1990s. Blade type fuses can be mounted in fuse blocks, in-line fuse holders, or fuse clips. The ATC fuse has a fuse element that is closed or sealed inside the plastic housing and the ATO fuse has a fuse element that is open or exposed on the bottom of the fuse between the blades.

Size groups

Mini, Regular, and Maxi Blade Type Fuses
Blade Size Blade Group Dimensions L × W × H Common Ratings (Maximum Amperage)
Micro2 APT, ATR 9.1 × 3.8 × 15.3 mm 5, 7.5, 10, 15, 20, 25, 30
Micro3 ATL 14.4 × 4.2 × 18.1 mm 5, 7.5, 10, 15
Low-Profile Mini APS, ATT 10.9 × 3.81 × 8.73 mm 2, 3, 4, 5, 7.5, 10, 15, 20, 25, 30
Mini APM, ATM 10.9 × 3.6 × 16.3 mm 2, 3, 4, 5, 7.5, 10, 15, 20, 25, 30
Regular APR, ATC (Closed), ATO (open) 19.1 × 5.1 × 18.5 mm 0.5, 1, 2, 3, 4, 5, 7.5, 10, 15, 20, 25, 30, 35, 40
Maxi APX 29.2 × 8.5 × 34.3 mm 20, 25, 30, 35, 40, 50, 60, 70, 80, 100, 120

Where space permits, a miniature circuit breaker is sometimes used to replace a blade-type fuse in the same fuse holder.

Color coding

Blade fuses use a common coloring scheme for the micro2, micro3, low-profile mini, mini, and regular size fuses, and a partial color similarity with the maxi size fuses. The following table shows the commonly available fuses for each size group.

Regular Blade Type Fuse
Color Current rating Micro2 Micro3 Low-
profile
Mini Reg Maxi
 Dark blue 0.5 A No No No No Yes No
 Black 1 A No No No No Yes No
 Gray 2 A No No Yes Yes Yes No
 Violet 3 A No No Yes Yes Yes No
 Pink 4 A No No Yes Yes Yes No
 Tan 5 A Yes Yes Yes Yes Yes No
 Brown 7.5 A Yes Yes Yes Yes Yes No
 Red 10 A Yes Yes Yes Yes Yes No
 Blue 15 A Yes Yes Yes Yes Yes No
 Yellow 20 A Yes No Yes Yes Yes Yes
 Clear 25 A Yes No Yes Yes Yes  Gray
 Green 30 A Yes No Yes Yes Yes Yes
 Blue-green 35 A No No Yes Yes Yes  Brown
 Orange 40 A No No Yes Yes Yes Yes
 Red 50 A No No No No No Yes
 Blue 60 A No No No No No Yes
 Amber/tan 70 A No No No No No Yes
 Clear 80 A No No No No No Yes
 Violet 100 A No No No No No Yes
 Purple 120 A No No No No No Yes

Regular fuses (ATO) rated 0.5 A, 35 A and 40 A are not mentioned in the DIN standards,[1] but are available in some products from Littelfuse, among others.

Bosch type

Bosch type fuse (used in older cars)

Bosch type fuses (also known as continental, torpedo, ATS, or GBC type fuses) are used in old (often European) automobiles. The physical dimension of this type of fuse is 6×25 mm with conical ends. Bosch type fuses usually use the same color-coding for the rated current. The DIN standard is 72581/1.

Color coding

Color Current rating
 Yellow 5 A
 White 8 A
 Red or
 Green
16 A
 Blue 25 A
 Grey or
 Black
40 A

Lucas type

Lucas type fuses are used in old British-made or assembled automobiles. The physical length of this ceramic type of fuse is either 1 inch or 1.25 inch, with conical ends. Glass tube fuses have straight ends. Lucas type fuses usually use the same color-coding for the rated current. Lucas fuses have three ratings; the continuous current they are designed to carry, the instantaneous current at which they will fuse, and the continuous current at which they will also fuse. The figure found on Lucas fuses is the continuous fusing current which is twice the continuous ampere rating that the system should be using; this can be a source of confusion when replacing Lucas fuses with non Lucas fuses. The Lucas 1/4" diameter glass tube fuse have a different length as compared to the standard US item. The Lucas 1/4" diameter glass tube fuse is 1 and 5/32" [~29.4 mm] long, while the US standard 1/4" glass tube fuse is 1 and 1/4" [~32.0 mm] long.

Color coding

Color Continuous ampere (=rated current) Instantaneous fusing ampere Continuous fusing ampere
Blue 1.5 3.5 3
Yellow 2.25 5 4.5
Red on Yellow 2.5 6 5
Green 3 7 6
Nut Brown 4 10 8
Red on Green 5 12 10
Green on Black 5 12 10
Red on Brown 6 14 12
Light Brown 7.5 18 15
Pink 12.5 30 25
White 17.5 40 35
Purple on Yellow 25 60 50
Yellow on Red 30 75 60

Glass tube type

Glass Tube type fuse

North-American built automobiles up to 1981 had electrical systems protected by cylindrical glass cartridge fuses rated 32 volts DC and current ratings from 4 amperes to 30 amperes. These are known as "SFE" fuses, as they were designed by the Society of Fuse Engineers to prevent the insertion of a grossly inadequate or unsafe fuse into the vehicle's fuse panel.[2][3] These SFE fuses all have a 14 inch diameter, and the length varies according to the rating of the fuse.

  • A 4 amp SFE 4 fuse is 58 inch long (the same dimension as an AGA fuse of any rating),
  • a 6 amp SFE 6 fuse is 34 inch long,
  • a 7.5 amp SFE 7.5 fuse is 78 inch long (same as an AGW fuse of any rating),
  • a 9 amp SFE 9 fuse is 78 inch long (same as an AGW fuse of any rating),
  • a 14 amp SFE 14 fuse is 1116 inch long,
  • a 20 amp SFE 20 fuse is 114 inch long (same as an AGC fuse of any rating), and
  • a 30 amp SFE 30 fuse is 1716 inches long.[2]

There are a number of lookalike fuses which can easily be confused with these. In general this type of fuse will have an "AG" label of some kind, which originally stood for "all glass." There are at least seven different sizes of fuses with a 1/4 inch diameter. The fuses listed are the most common for the size, which is always a fast-acting fuse:

  • 1AG size, type AGA, 1 amp to 30 amp, 1/4 inch diameter by 58 inch long[2]
  • 7AG size, type AGW, 1 amp to 30 amp, 1/4 inch diameter by 78 inch long[2]
  • 8AG size, type AGX, 1 amp to 30 amp, 1/4 inch diameter by 1 inch long[4]
  • 3AG size, type AGC, 0.125 amp to 50 amp, 1/4 inch diameter by 114 inch long[4]
  • UK size, type UK, 35 amp to 50 amp, 1/4 inch diameter by 114 inch long[2]
  • 9AG size, type AGY, 50 amp, 1/4 inch diameter by 1716 inch long[2]
  • 5AG size, type AGU, 1 amp to 60 amp, 1332 inch diameter by 112 inch long.[2] Also called "Midget fuses."[4]

These and other fuses are still being manufactured for many applications, including for AC circuits and DC uses. Some are time delayed, slow reacting, or have leads for terminals used in circuits without a fuse holder.[4][3] Many of the fuse dimensions and characteristics are published by the Society of Automotive Engineers as Standard SAE J 554.

Limiter type

Limiter fuses consist of a metal strip from a lock plate,[clarification needed] for currents over 40 amperes. Frequently, these are used in close proximity to starter battery fuse boxes. They are used also in electric vehicles, e.g., in forklift trucks. Because strip fuses require the use of tools for replacement they are therefore legally considered non-serviceable components for end-users.[citation needed]

See also

References

Automotive fuse selection guides

Blade fuses

Glass tube fuses