Jump to content

Gibson J-200

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Bender the Bot (talk | contribs) at 04:32, 18 October 2016 (→‎References: http→https for Google Books and Google News using AWB). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Gibson J-200
1960 Gibson J-200
ManufacturerGibson
Period1937-present
Construction
Body typeJumbo
Neck jointDovetail
Woods
BodySitka Spruce top
Maple back and sides
NeckMaple
FretboardRosewood
Hardware
BridgeRosewood
Colors available
Natural, Black, Vintage Sunburst

The Gibson J-200 (Super Jumbo 200) is an acoustic guitar model produced by the Gibson Guitar Corporation.

History

Gibson entered into production of this model in 1937 as its top-of-the-line flat top guitar, initially called the Super Jumbo, changing the name in 1939 to the Super Jumbo 200. It replaced the Gibson Advanced Jumbo.[1] It was made at the Gibson Factory in Kalamazoo, Michigan. The SJ-200 was named for its super large 16 7/8" flat top body, with a double-braced red spruce top and rosewood back and sides, and sunburst finish. In 1947 the materials used for the guitar changed to maple back and sides. Gibson changed the name to the J-200 in 1955. Due to the weak post-depression economy and wartime austerity, demand for this high end guitar was very limited and production quantities were small. Early models made from rosewood are highly prized by collectors.

Current models

Gibson currently makes many variations of the J-200. The J-200 Studio is the lowest model in the line, featuring chrome hardware, a plain (non-engraved) pickguard, natural finish and no fingerboard binding, but it retains the inlays, maple back/sides and electronics of the J-200 Standard. It has since been discontinued.

The J-200 Standard is available in sunburst and natural, features Fishman electronics, gold hardware, Grover tuners, figured maple back/sides and a three-piece laminate neck (maple/rosewood/maple). It also has a rosewood fingerboard and bridge, and mother of pearl crown inlays.

The J-200 Custom is a high end model, featuring rosewood back and sides (like the original SJ-200s from the 1930s), a rosewood fingerboard and bridge, gold hardware, Grover Imperial tuners, Fishman electronics, an upgraded case, the same three-piece neck as the Standard and Studio, abalone inlays, an older, "script" Gibson logo and a 'four ribbon bridge' instead the Standard's 'two ribbon' bridge.

Along with these three are two reissues, the True Vintage (based on 1950s construction) and the Western Classic Prewar 200, which is similar in spec to the original early models (rosewood back and sides, ebony fingerboard, block inlays). Gibson also does limited run models, such as the J-200 Koa, the J-200 Trophy, and Montana Gold.

Epiphone produced a more affordable version called the EJ-200, but it is now out of production.[2][3]

References

Citations

  1. ^ Wheeler 1992, p. 103.
  2. ^ "Epiphone EJ-200". Epiphone.com.
  3. ^ "Out of Production".

Sources

External links