HP-150

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Matthiaspaul (talk | contribs) at 17:59, 28 November 2016 (More CE). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Introduced: November 1983
MSRP: $2795[1]
CPU: Intel 8088
CPU speed: 8 MHz
Operating system: MS-DOS
DRAM: 256 KB
SRAM (video): 6 KB
ROM: 160 KB
Floppies: 270 KB × 2
Discontinued: ?
Touchscreen of the HP Series 100 HP-150

The HP-150 (aka HP Touchscreen or HP 45611A) was a compact, powerful and innovative computer made by Hewlett-Packard in 1983. It was based on the Intel 8088 and was one of the world's earliest commercialized touch screen computers. The machine was not IBM PC compatible, although it was MS-DOS compatible. Customized MS-DOS versions 2.01, 2.11 and 3.20 were available. Its 8088 CPU, rated at 8 MHz, was faster than the 4.77 MHz CPUs used by the IBM PC of that period. Using add-on cards, main memory could be increased from 256 KB to 640 KB. However, its mainboard did not have a slot for the optional Intel 8087 math coprocessor due to space constraints. The HP-150 with an optional hard disk was called the HP Touchscreen MAX.

The screen was a 9-inch Sony CRT surrounded by infrared emitters and detectors which detected the position of any non-transparent object that touched the screen. In the original HP-150, these emitters & detectors were placed within small holes located in the inside of the monitor's bezel (which resulted in the bottom series of holes sometimes filling with dust, causing the touch screen to fail until the dust was vacuumed from the holes).

Like the Macintosh, the computer was packaged with the CRT. Unlike the Mac, the 3½-inch disks were external. The HP-150 sat atop the phone book sized 9121D[2] dual 3½-inch floppy (76 mm high, 325 mm wide, 285 mm deep) or similarly sized hard disk devices, connected by HP-IB. The HP-120 (aka HP 45600A)[3] 2×Z80 CP/M machine also used the 9121 drives.

The HP-150 II (aka HP 45849A)[4] replaced the HP-150 in 1984. While still called HP Touchscreen II, the touch screen was no longer standard, but rather a rarely adopted option. The optional touch screen bezel was superior to the original bezel, in that the emitters and detectors were now located behind a solid infrared-transparent plastic; removing the need to regularly clean the holes found in the original model.

The HP-150 II had the same footprint as the HP-150, but came in a larger housing to accommodate its 12-inch screen, but could no longer accommodate an internal printer. The HP-150 II had four expansion slots available (as opposed to two), and could accommodate an optional 8087 co-processor board. There were some minor compatibility problems between the HP-150 and the HP-150 II in the video subsystem.

In 1985, HP introduced the Vectra, which InfoWorld stated was the company "responding to demands from its customers for full IBM PC compatibility". HP repositioned the HP-150 as a workstation for the HP 3000 minicomputer.[5]

  • Supported HP-IB attached storage:
HP Model Command Set # FDD FDD Type Sides FDD Capacity (each) # HDD HDD Capacity Notes
HP 82901M Amigo 2 5.25" DS 270 KB 0 n/a Add-on only
HP 82902M Amigo 1 5.25" DS 270 KB 0 n/a Add-on only
HP 9121D Amigo 2 3.5" SS 270 KB 0 n/a -
HP 9121S Amigo 1 3.5" SS 270 KB 0 n/a Add-on only
HP 9122D SS/80 2 3.5" DS 710 KB 0 n/a -
HP 9122S SS/80 1 3.5" DS 710 KB 0 n/a Add-on only
HP 9123D SS/80 2 3.5" DS 710 KB 0 n/a HP-150 II only
HP 9125S Amigo 1 5.25" DS 360 KB 0 n/a Add-on only. Not bootable
HP 9127S Amigo 1 5.25" DS 360 KB 0 n/a Add-on only. Not bootable
HP 9133A Amigo 1 3.5" SS 270 KB 1 5 MB -
HP 9133B Amigo 1 3.5" SS 270 KB 1 10 MB -
HP 9133D SS/80 1 3.5" DS 710 KB 1 15 MB -
HP 9133H SS/80 1 3.5" DS 710 KB 1 20 MB Requires DOS 3.20
HP 9133L SS/80 1 3.5" DS 710 KB 1 40 MB Requires DOS 3.20
HP 9133V Amigo 1 3.5" SS 270 KB 1 5 MB -
HP 9133XV Amigo 1 3.5" SS 270 KB 1 15 MB -
HP 9134A Amigo 0 n/a n/a n/a 1 5 MB -
HP 9134B Amigo 0 n/a n/a n/a 1 10 MB -
HP 9134H SS/80 0 n/a n/a n/a 1 20 MB Requires DOS 3.20
HP 9134L SS/80 0 n/a n/a n/a 1 40 MB Requires DOS 3.20
HP 9134V Amigo 0 n/a n/a n/a 1 5 MB -
HP 9134XV Amigo 0 n/a n/a n/a 1 15 MB -
HP 9153A SS/80 1 3.5" DS 710 KB 1 10 MB -
HP 9153B SS/80 1 3.5" DS 710 KB 1 20 MB Requires DOS 3.20
HP 9153C SS/80 1 3.5" DS 710 KB 1 10/20/40 MB Requires DOS 3.20
HP 9154A SS/80 0 n/a n/a n/a 1 10 MB -
HP 9154B SS/80 0 n/a n/a n/a 1 20 MB Requires DOS 3.20
  • Display resolutions:
    • Text: 80 columns × 27 lines (720 pixel × 378 pixel)
      • Character size: 7 pixel × 10 pixel
      • Character cell size: 9 pixel × 14 pixel
      • Inherent HP Terminal emulation equivalent to HP 2623 Graphics Terminal
    • Bit-map: 512 pixel × 390 pixel
    • Separate plane for text and graphics
  • Monitor sensor grid: 40 (h) × 24 (v)
  • Optional Internal Thermal printer HP 2647A (Fax Roll)
  • Communication ports:
    • RS-232 × 2 (one of them supported RS-422)
    • HP-IB (IEEE-488)
    • HP-HIL (standard on the HP-150 II, but an optional add-on card on the HP-150)

HP-150's touch screen sensor grid is quite coarse. Its resolution is only two characters wide. Used mainly for rough cursor positioning and function key control, it could not be used to draw pictures.

Reception

BYTE in November 1984 called the HP-150 "an extremely flexible machine", but "difficult to program".[6]

See also

References

  1. ^ http://hpmuseum.net/display_item.php?hw=43
  2. ^ http://hpmuseum.net/display_item.php?hw=288
  3. ^ http://www.hpmuseum.net/display_item.php?hw=42
  4. ^ http://www.hpmuseum.net/display_item.php?hw=44
  5. ^ Petrosky, Mark (1985-09-30). "HP's Vectra Called PC AT 'Hybrid'". InfoWorld. p. 5. Retrieved 2015-02-20.
  6. ^ Haas, Mark (November 1984). "The HP 150 Computer". BYTE. Vol. 9, no. 12. pp. 262–275. Retrieved 2015-02-14.

Bibliography

External links

Retrieved from "https://en.wikipedia.org/w/index.php?title=HP-150&oldid=751946703"