- 2-dimensional case: Suppose two regions in a plane are included between two parallel lines in that plane. If every line parallel to these two lines intersects both regions in line segments of equal length, then the two regions have equal areas.
- 3-dimensional case: Suppose two regions in three-space (solids) are included between two parallel planes. If every plane parallel to these two planes intersects both regions in cross-sections of equal area, then the two regions have equal volumes.
Today Cavalieri's principle is seen as an early step towards integral calculus, and while it is used in some forms, such as its generalization in Fubini's theorem, results using Cavalieri's principle can often be shown more directly via integration. In the other direction, Cavalieri's principle grew out of the ancient Greek method of exhaustion, which used limits but did not use infinitesimals.
Cavalieri's principle was originally called the method of indivisibles, the name it was known by in Renaissance Europe. Cavalieri developed a complete theory of indivisibles, elaborated in his Geometria indivisibilibus continuorum nova quadam ratione promota (Geometry, advanced in a new way by the indivisibles of the continua, 1635) and his Exercitationes geometricae sex (Six geometrical exercises, 1647).
In the 3rd century BC, Archimedes, using a method resembling Cavalieri's principle, was able to find the volume of a sphere given the volumes of a cone and cylinder in his work The Method of Mechanical Theorems. In the 5th century AD, Zu Chongzhi and his son Zu Gengzhi established a similar method to find a sphere's volume. The transition from Cavalieri's indivisibles to Evangelista Torricelli's and John Wallis's infinitesimals was a major advance in the history of the calculus. The indivisibles were entities of codimension 1, so that a plane figure was thought as made out of an infinity of 1-dimensional lines. Meanwhile, infinitesimals were entities of the same dimension as the figure they make up; thus, a plane figure would be made out of "parallelograms" of infinitesimal width. Applying the formula for the sum of an arithmetic progression, Wallis computed the area of a triangle by partitioning it into infinitesimal parallelograms of width 1/∞.
That is done as follows: Consider a sphere of radius and a cylinder of radius and height . Within the cylinder is the cone whose apex is at the center of one base of the cylinder and whose base is the other base of the cylinder. By the Pythagorean theorem, the plane located units above the "equator" intersects the sphere in a circle of area . The area of the plane's intersection with the part of the cylinder that is outside of the cone is also . As we can see, the area of every intersection of the circle with the horizontal plane located at any height equals to the area of the intersection of the plane with the part of the cylinder that is "outside" of the cone; thus, applying Cavalieri's principle, we could say that the volume of the half sphere equals to the volume of the part of the cylinder that is "outside" the cone. The aforementioned volume of the cone is of the volume of the cylinder, thus the volume outside of the cone is the volume of the cylinder. Therefore the volume of the upper half of the sphere is of the volume of the cylinder. The volume of the cylinder is
("Base" is in units of area; "height" is in units of distance. Area × distance = volume.)
Therefore the volume of the upper half-sphere is and that of the whole sphere is .
Cones and pyramids
The fact that the volume of any pyramid, regardless of the shape of the base, whether circular as in the case of a cone, or square as in the case of the Egyptian pyramids, or any other shape, is (1/3) × base × height, can be established by Cavalieri's principle if one knows only that it is true in one case. One may initially establish it in a single case by partitioning the interior of a triangular prism into three pyramidal components of equal volumes. One may show the equality of those three volumes by means of Cavalieri's principle.
In fact, Cavalieri's principle or similar infinitesimal argument is necessary to compute the volume of cones and even pyramids, which is essentially the content of Hilbert's third problem – polyhedral pyramids and cones cannot be cut and rearranged into a standard shape, and instead must be compared by infinite (infinitesimal) means. The ancient Greeks used various precursor techniques such as Archimedes's mechanical arguments or method of exhaustion to compute these volumes.
The napkin ring problem
In what is called the napkin ring problem, one shows by Cavalieri's principle that when a hole is drilled straight through the centre of a sphere where the remaining band has height h, the volume of the remaining material surprisingly does not depend on the size of the sphere. The cross-section of the remaining ring is a plane annulus, whose area is the difference between the areas of two circles. By the Pythagorean theorem, the area of one of the two circles is π times r 2 − y 2, where r is the sphere's radius and y is the distance from the plane of the equator to the cutting plane, and that of the other is π times r 2 − (h/2) 2. When these are subtracted, the r 2 cancels; hence the lack of dependence of the bottom-line answer upon r.
N. Reed has shown how to find the area bounded by a cycloid by using Cavalieri's principle. A circle of radius r can roll in a clockwise direction upon a line below it, or in a counterclockwise direction upon a line above it. A point on the circle thereby traces out two cycloids. When the circle has rolled any particular distance, the angle through which it would have turned clockwise and that through which it would have turned counterclockwise are the same. The two points tracing the cycloids are therefore at equal heights. The line through them is therefore horizontal (i.e. parallel to the two lines on which the circle rolls). Consequently each horizontal cross-section of the circle has the same length as the corresponding horizontal cross-section of the region bounded by the two arcs of cyloids. By Cavalieri's principle, the circle therefore has the same area as that region.
Consider the rectangle bounding a single cycloid arch. From the definition of a cycloid, it has width 2πr and height 2r, so its area is four times the area of the circle. Calculate the area within this rectangle that lies above the cycloid arch by bisecting the rectangle at the midpoint where the arch meets the rectangle, rotate one piece by 180° and overlay the other half of the rectangle with it. The new rectangle, of area twice that of the circle, consists of the "lens" region between two cycloids, whose area was calculated above to be the same as that of the circle, and the two regions that formed the region above the cycloid arch in the original rectangle. Thus, the area bounded by a rectangle above a single complete arch of the cycloid has area equal to the area of the circle, and so, the area bounded by the arch is three times the area of the circle.
- Fubini's theorem (Cavalieri's principle is a particular case of Fubini's theorem)
- Howard Eves, "Two Surprising Theorems on Cavalieri Congruence", The College Mathematics Journal, volume 22, number 2, March, 1991), pages 118–124
- Katz, Victor J. (1998), A History of Mathematics: An Introduction (2nd ed.), Addison-Wesley, p. 477.
- "Archimedes' Lost Method"
- Zill, Dennis G.; Wright, Scott; Wright, Warren S. (2009). Calculus: Early Transcendentals (3 ed.). Jones & Bartlett Learning. p. xxvii. ISBN 0-7637-5995-3. Extract of page 27
- N. Reed, "Elementary proof of the area under a cycloid", Mathematical Gazette, volume 70, number 454, December, 1986, pages 290–291