Jump to content

FeMoco

From Wikipedia, the free encyclopedia
(Redirected from Iron-molybdenum cofactor)
Structure of the FeMo cofactor showing the sites of binding to nitrogenase[1] The amino acids cysteine (Cys) and histidine (His) are indicated.

FeMoco (FeMo cofactor) is the primary cofactor of nitrogenase. Nitrogenase is the enzyme that catalyzes the conversion of atmospheric nitrogen molecules N2 into ammonia (NH3) through the process known as nitrogen fixation. Because it contains iron and molybdenum, the cofactor is called FeMoco. Its stoichiometry is Fe7MoS9C.

Structure

[edit]

The FeMo cofactor is a cluster with composition Fe7MoS9C. This cluster can be viewed as two subunits composed of one Fe4S3 (iron(III) sulfide) cluster and one MoFe3S3 cluster. The two clusters are linked by three sulfide ligands and a bridging carbon atom. The unique iron (Fe) is anchored to the protein by a cysteine. It is also bound to three sulfides, resulting in tetrahedral molecular geometry. The additional six Fe centers in the cluster are each bonded to three sulfides. These six internal Fe centers define a trigonal prismatic arrangement around a central carbide center. The molybdenum is attached to three sulfides and is anchored to the protein by the imidazole group of a histidine residue. Also bound to Mo is a bidentate homocitrate cofactor, leading to octahedral geometry.[2] Crystallographic analysis of the MoFe protein initially revealed the geometry and chemical composition of FeMoco,[3][4][5] later confirmed by extended X-ray absorption fine-structure (EXAFS) studies.[6] The Fe-S, Fe-Fe and Fe-Mo distances were determined to be 2.32, 2.64, and 2.73 Å respectively.[6]

Biosynthesis

[edit]

Biosynthesis of FeMoco is a complicated process that requires several Nif gene products, specifically those of nifS, nifQ, nifB, nifE, nifN, nifV, nifH, nifD, and nifK (expressed as the proteins NifS, NifU, etc.). FeMoco assembly is proposed to be initiated by NifS and NifU which mobilize Fe and sulfide into small Fe-S fragments. These fragments are transferred to the NifB scaffold and arranged into a Fe7MoS9C cluster before transfer to the NifEN protein (encoded by nifE and nifN) and rearranged before delivery to the MoFe protein.[7] Several other factors participate in the biosynthesis. For example, NifV is the homocitrate synthase that supplies homocitrate to FeMoco. NifV, a protein factor, is proposed to be involved in the storage and/or mobilization of Mo. Fe protein is the electron donor for MoFe protein. These biosynthetic factors have been elucidated and characterized with the exact functions and sequence confirmed by biochemical, spectroscopic, and structural analyses.

Identity of the core atom

[edit]

The three proteins that play a direct role in the M-cluster synthesis are NifH, NifEN, and NifB. The NifB protein is responsible for the assembly of the Fe-S core of the cofactor; a process that involves stitching together two [4Fe-4S] clusters. NifB belongs to the SAM (S-adenosyl-L-methionine) enzyme superfamily. During the biosynthesis of the FeMo cofactor, NifB and its SAM cofactor are directly involved in the insertion of a carbon atom at the center of the Fe-S complex. An equivalent of SAM donates a methyl group, which becomes the interstitial carbide of the M-cluster. The methyl group of SAM is mobilized by radical removal of an H by a 5’-deoxyadenosine radical (5’-dA·). Presumably, a transient –CH2· radical is formed that is subsequently incorporated into the metal cluster forming a Fe6-carbide species. The interstitial carbon remains associated with the FeMo cofactor after insertion into the nitrogenase,[8] The nature of the central atom in FeMoco as a carbon species was identified in 2011.[5][9] The approach for the identification relied on a combination of 13C/15N-labeling and pulsed EPR spectroscopy as well as X-ray crystallographic studies at full atomic resolution.[5] Additionally, X-ray diffractometry was used to verify that there was a central carbon atom in the middle of the FeMo cofactor and x-ray emission spectroscopic studies showed that central atom was carbon due to the 2p→1s carbon-iron transition.[9] The use of X-ray crystallography showed that while the FeMo cofactor is not in its catalytic form, the carbon keeps the structure rigid which helps describe the reactivity of nitrogenase.

Electronic properties

[edit]

According to the analysis by electron paramagnetic resonance spectroscopy, the resting state of the FeMo cofactor has a spin state of S=3/2. Upon one-electron reduction, the cofactor becomes EPR silent. Understanding the process in which an electron is transferred in the protein adduct shows a more precise kinetic model of the FeMo cofactor.[10] Density functional theory calculations as well as spatially resolved anomalous dispersion refinement have suggested that the formal oxidation state is MoIV-2FeII-5FeIII-C4−-H+, but the "true" oxidation states have not been confirmed experimentally.[11][12]

Substrate binding

[edit]

The location of substrate attachment to the complex has yet to be elucidated. It is believed that the Fe atoms closest to the interstitial carbon participate in substrate activation, but the terminal molybdenum is also a candidate for nitrogen fixation.[13] X-ray crystallographic studies utilizing MoFe-protein and carbon monoxide (CO), which is isoelectronic to dinitrogen, demonstrated that carbon monoxide is binding to the Fe2-Fe6-edge of FeMoco.[14] Additional studies showed simultaneous binding of two CO-molecules to FeMoco, providing a structural basis for biological Fischer-Tropsch-type chemistry.[15][16] Se-incorporation studies in combination with time-resolved X-ray crystallography evidenced major structural rearrangements in the FeMoco-structure upon substrate binding events.[17]

Isolation

[edit]

Isolation of the FeMo cofactor from nitrogenase is done through centrifugal sedimentation of nitrogenase into the MoFe protein and the Fe protein. The FeMo cofactor is extracted by treating the MoFe protein with acids. The first extraction is done with N,N-dimethylformamide and the second by a mixture of N-methylformamide and Na2HPO4 before final sedimentation by centrifugation.[18]

References

[edit]
  1. ^ Einsle O, Rees DC (June 2020). "Structural Enzymology of Nitrogenase Enzymes". Chemical Reviews. 120 (12): 4969–5004. doi:10.1021/acs.chemrev.0c00067. PMC 8606229. PMID 32538623. S2CID 219703833.
  2. ^ Leigh GJ (2002). "Chapter 5: Structure and Spectroscopic Properties of Metallo-sulfur Clusters". Nitrogen Fixation at the Millennium. Amsterdam: Elsevier Science B. V. pp. 209–210. ISBN 978-0-444-50965-9.
  3. ^ Kim J, Rees DC (September 1992). "Structural models for the metal centers in the nitrogenase molybdenum-iron protein". Science. 257 (5077): 1677–1682. Bibcode:1992Sci...257.1677K. doi:10.1126/science.1529354. PMID 1529354.
  4. ^ Einsle O, Tezcan FA, Andrade SL, Schmid B, Yoshida M, Howard JB, Rees DC (September 2002). "Nitrogenase MoFe-protein at 1.16 A resolution: a central ligand in the FeMo-cofactor". Science. 297 (5587): 1696–1700. Bibcode:2002Sci...297.1696E. doi:10.1126/science.1073877. PMID 12215645. S2CID 29558745.
  5. ^ a b c Reiher M, Wiebe N, Svore KM, Wecker D, Troyer M (July 2017). "Elucidating reaction mechanisms on quantum computers". Proceedings of the National Academy of Sciences of the United States of America. 114 (29): 7555–7560. arXiv:1605.03590. Bibcode:2017PNAS..114.7555R. doi:10.1073/pnas.1619152114. PMC 5530650. PMID 28674011.
  6. ^ a b Roat-Malone RM (2002). "Chapter 6: MoFe Protein Structure.". Bioinorganic Chemistry. Hoboken, New Jersey: John Wiley & Sons, Inc. pp. 253–254. ISBN 978-0-471-26533-7.
  7. ^ Hu Y, Ribbe MW (May 2011). "Biosynthesis of Nitrogenase FeMoco". Coordination Chemistry Reviews. 255 (9–10): 1218–1224. doi:10.1016/j.ccr.2010.11.018. PMC 3077758. PMID 21503270.
  8. ^ Boal AK, Rosenzweig AC (September 2012). "Biochemistry. A radical route for nitrogenase carbide insertion". Science. 337 (6102): 1617–1618. Bibcode:2012Sci...337.1617B. doi:10.1126/science.1229088. PMID 23019640. S2CID 98713038.
  9. ^ a b Lancaster KM, Roemelt M, Ettenhuber P, Hu Y, Ribbe MW, Neese F, et al. (November 2011). "X-ray emission spectroscopy evidences a central carbon in the nitrogenase iron-molybdenum cofactor". Science. 334 (6058): 974–977. Bibcode:2011Sci...334..974L. doi:10.1126/science.1206445. PMC 3800678. PMID 22096198.
  10. ^ Burgess BK, Lowe DJ (November 1996). "Mechanism of Molybdenum Nitrogenase". Chemical Reviews. 96 (7): 2983–3012. doi:10.1021/cr950055x. PMID 11848849.
  11. ^ Harris TV, Szilagyi RK (June 2011). "Comparative assessment of the composition and charge state of nitrogenase FeMo-cofactor". Inorganic Chemistry. 50 (11): 4811–4824. doi:10.1021/ic102446n. PMC 3105220. PMID 21545160.
  12. ^ Spatzal T, Schlesier J, Burger EM, Sippel D, Zhang L, Andrade SL, et al. (March 2016). "Nitrogenase FeMoco investigated by spatially resolved anomalous dispersion refinement". Nature Communications. 7 (1): 10902. Bibcode:2016NatCo...710902S. doi:10.1038/ncomms10902. PMC 4793075. PMID 26973151.
  13. ^ Hallmen PP, Kästner J (June 2015). "N2 Binding to the FeMo-Cofactor of Nitrogenase". Zeitschrift für Anorganische und Allgemeine Chemie. 641 (1): 118–122. doi:10.1002/zaac.201400114.
  14. ^ Spatzal T, Perez KA, Einsle O, Howard JB, Rees DC (September 2014). "Ligand binding to the FeMo-cofactor: structures of CO-bound and reactivated nitrogenase". Science. 345 (6204): 1620–1623. Bibcode:2014Sci...345.1620S. doi:10.1126/science.1256679. PMC 4205161. PMID 25258081.
  15. ^ Buscagan TM, Perez KA, Maggiolo AO, Rees DC, Spatzal T (March 2021). "Structural Characterization of Two CO Molecules Bound to the Nitrogenase Active Site". Angewandte Chemie. 60 (11): 5704–5707. doi:10.1002/anie.202015751. PMC 7920927. PMID 33320413.
  16. ^ Rohde M, Laun K, Zebger I, Stripp ST, Einsle O (May 2021). "Two ligand-binding sites in CO-reducing V nitrogenase reveal a general mechanistic principle". Science Advances. 7 (22). Bibcode:2021SciA....7.4474R. doi:10.1126/sciadv.abg4474. PMC 8163085. PMID 34049880.
  17. ^ Spatzal T, Perez KA, Howard JB, Rees DC (December 2015). "Catalysis-dependent selenium incorporation and migration in the nitrogenase active site iron-molybdenum cofactor". eLife. 4: e11620. doi:10.7554/eLife.11620. PMC 4755756. PMID 26673079.
  18. ^ Burgess BK, Jacobs DB, Stiefel EI (July 1980). "Large-scale purification of high activity Azotobacter vinelandII nitrogenase". Biochimica et Biophysica Acta (BBA) - Enzymology. 614 (1): 196–209. doi:10.1016/0005-2744(80)90180-1. PMID 6930977.