John Day Dam

John Day Dam
John Day Dam
	The dam as seen from Washington
Location	Sherman County, Oregon / Klickitat County, Washington; United States
Construction began	1958
Opening date	1971
Construction cost	US$511 million
Dam and spillways
Type of dam	Concrete gravity, run-of-the-river
Impounds	Columbia River
Height	56 m (184 ft)
Length	2,327 m (7,635 ft)
Spillway type	Service, gate-controlled
Reservoir
Creates	Lake Umatilla
Total capacity	2,530,000 acre⋅ft (3.12×109 m3)
Power Station
Operator(s)	U.S. Army Corps of Engineers
Type	Run-of-the-river
Turbines	16 × 135 MW
Installed capacity	2,160 MW
Annual generation	8,418 GWh (2009)

The John Day Dam is a concrete gravity run-of-the-river dam spanning the Columbia River in the northwestern United States.^[2] The dam features a navigation lock plus fish ladders on both sides. The John Day Lock has the highest lift (110 feet) of any U.S. lock.^[3] The reservoir impounded by the dam is Lake Umatilla,^[4] and it runs 76.4 miles (123 kilometers) up the river channel to the foot of the McNary Dam. John Day Dam is part of the Columbia River Basin system of dams.

Location

John Day Dam is located 28 miles (45 km) east of the city of The Dalles, Oregon, and just below the mouth of the John Day River. The closest town on the Washington side is Goldendale, 20 miles (32 km) north. The closest town on the Oregon side is Rufus, Oregon. Its crest elevation is approximately 570 feet (170 m) above sea level. It joins Sherman County, Oregon with Klickitat County, Washington, 216 miles (348 kilometers) upriver from the mouth of the Columbia near Astoria, Oregon.

History

Construction of the dam began in 1958 and was completed in 1971, making it the newest dam on the lower Columbia, at a total cost of US$511 million. John Day Dam was built and is operated by the U.S. Army Corps of Engineers. The dam's power generation capacity is 2,480,000 kW (overload capacity). The dam underwent a major repair to the upper lock gate in 2010, as documented in the National Geographic Channel program "World's Toughest Fixes".^[5]

Gallery

John Day Dam view from the north, Washington side of the Columbia River, with the lock in the foreground
Depth of John Day Dam pool is illustrated by this 1967 photo showing the new UPRR bridge, with old bridges at sites to be submerged below.

Specifications

Altitude: 266 feet (81 m) above sea level
Height: 183 feet (56 m)
Length: 7,365 feet (2,327 m)
Navigation lock:
- Single-lift
- 86 feet (26 m) wide
- 675 feet (206 m) long
Powerhouse
- Sixteen 135,000 kW units
- Total capacity: 2,160 MW
- Overload capacity: 2,485 MW
Spillway
- Gates: 20
- Length: 1,228 feet (374 m)

Sources

"John Day Dam (Oregon - 164 ft. elev.)". Geographic Names Information System. United States Geological Survey. Retrieved 2006-05-10.
"John Day Dam (Washington - 269 ft. elev.)". Geographic Names Information System. United States Geological Survey. Retrieved 2006-05-10.

References

^ http://carma.org/plant/detail/20465
^ "The Columbia River System Inside Story" (PDF). BPA.gov. pp. 14–15. Retrieved 17 July 2010.
^ http://www.engineeringsights.org/SightDetail.asp?Sightid=107&id=&view=k&name=&page=21&image=0
^ U.S. Geological Survey Geographic Names Information System: Lake Umatilla
^ "World's Toughest Fixes on NGC".

External links

John Day Dam US Army Corps Engineers [1] U.S. Army Corps of Engineers

[1] ttp://carma.org/plant/detail/20465

[2] "The Columbia River System Inside Story" (PDF). BPA.gov. pp. 14–15. Retrieved 17 July 2010.

[3] ttp://www.engineeringsights.org/SightDetail.asp?Sightid=107&id=&view=k&name=&page=21&image=0

[4] U.S. Geological Survey Geographic Names Information System: Lake Umatilla

[TheFutonCritic_airdates-5] "World's Toughest Fixes on NGC".

[1]

[2]

[3]

[4]

[5]