Jump to content

KRISS Vector

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Faceless Enemy (talk | contribs) at 02:24, 29 January 2016 (cleanup, replaced: 9x19 → 9×19 (4), 3x → 3×, 9mm Parabellum → 9×19mm Parabellum (5), 9×19×19mm Parabellum → 9×19mm Parabellum (4), .45ACP → .45 ACP (2) using AWB). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

KRISS Vector
TDI SMG
Vector CRB Carbine
TypeSubmachine gun
Place of origin United States
Production history
Designed2006
ManufacturerKRISS USA, Inc.
Produced2009-present
VariantsSMG (submachine gun),[1] CRB/SO (carbine, special ops),[2] SBR/SO (short barrel rifle, special ops),[3] SDP (special duty pistol / security detail pistol)[4]
Specifications
Mass6 lb (2.7 kg) (SMG & SBR/SO)
7 lb (3.2 kg) (CRB/SO)
Length24.3 in (620 mm) (SMG & SBR/SO)
16 in (410 mm) w/stock folded
34.8 in (880 mm) (CRB/SO)
26.5 in (670 mm) w/stock folded
Barrel length5.5 in (140 mm) (SMG, SBR/SO, SDP)
6.5 in (170 mm) (Optional for SMG, SBR/SO, SDP Gen II)
16 in (410 mm) (CRB/SO)
Cartridge.45 ACP (11.43×23mm), 9×19mm Parabellum
ActionDelayed blowback, closed bolt
Rate of firePrototype: 1,500 rounds per minute
Vector SMG: 1,200 RPM[5]
Civilian models: semi-auto only
Effective firing range55 yards (70 yards with 16 inch barrel)
Feed system.45 ACP: 10- or 13-round detachable box magazine
~25-round w/optional "MagEx 25+" extension (formerly MagEx 30)[6]
9×19mm Parabellum: 10-, 17-, 19-, or 33-round detachable box magazine
SightsFlip-up iron
MIL-STD-1913 rail provided for optics

The KRISS Vector[7] series is a family of weapons based upon the parent submachine gun design developed by KRISS USA, formerly Transformational Defense Industries (TDI). They use an unconventional delayed blowback system combined with in-line design to reduce perceived recoil and muzzle climb.

Design

Right view of Kriss Vector Carbine, stock folded

The Vector's action, the KRISS Super V System (KSVS), is an articulated mechanism which allows the bolt and an inertia block to move downward into a recess behind the magazine well.[8] The theory is that at the end of this travel, energy is transmitted downward rather than rearward, reducing felt recoil.

.22 LR, .40 S&W and 9×19mm Parabellum variants were mentioned when the gun was first released. Gen 2 variants with multiple design changes including a new 9mm variant were confirmed at the 2015 SHOT show,[9] though the other versions have yet to materialise. The original Vector was designed to accept standard Glock 21 pistol magazines; a special "MagEx 30"[10] kit was available to convert a factory 13-round .45 ACP Glock magazine to an extended high-capacity version, though this is now marketed as a "25+" round kit.[6] The newer 9×19mm versions instead use standard Glock 17 magazines.

When fired, the barrel axis is in line with the shoulder as in the M16 rifle, but also in line with the shooter's hand. This is intended to reduce muzzle climb when combined with the off-axis bolt travel.

Variants

The selective fire submachine gun variant, the Vector SMG features a 5.5 inch barrel (with an option of a 6.5-inch barrel on the Gen II version), folding stock, flip-up Midwest Industries back-up iron sights (BUIS) (MagPul MBUS on Gen II weapons), Picatinny rails, and two or three-mode selective fire (single, optional two-round burst and full-auto).

Three semi-automatic versions are produced for the US Market. The Vector CRB is the semi-automatic carbine with a permanently-affixed extension to the standard 5.5-inch barrel, extending it to 16-inch (410 mm), intended for states with short-barrel rifle bans. The standard model has a folding stock (fixed in states where state law prohibits). The Vector SBR is a short-barreled version featuring the same barrel as the SMG but it is not capable of full automatic fire. The Vector SDP is a pistol version that has a permanently affixed cap with a sling mount in place of a folding stock. The newer Gen II version features a redesigned pistol grip and trigger, optional factory Cerakote coatings in olive drab or flat dark earth, in addition to the original flat black, and has the swing angle of the safety lever reduced from 120 to 45 degrees. The Gen II also eliminates the opening above the barrel for the original weapon's optional Surefire weaponlight, since these are no longer manufactured.[11] The Gen II version is also capable of being converted to 9×19mm Parabellum by replacing the lower receiver. "Enhanced" versions of the Gen II CRB and SBR are also available, with collapsing M4-style stock adaptors instead of the standard folding stock (with a Magpul UBR stock included) and a square barrel shroud for the CRB, though these accessories can also be purchased separately.

A second generation version of the Vector called the K10 was announced at SHOT Show 2011.[12] This is a slightly more compact weapon based on the same Super V system. The main difference is the use of a telescopic stock that collapses into the upper receiver rather than the earlier folding stock. The cocking handle operates downward instead of horizontally. The K10 was not displayed after SHOT 2013 and its status is unknown.

KRISS is also developing a semi-automatic pistol called the "KARD", using the Super V System in a much smaller package to minimize recoil and muzzle rise in 9×19mm Parabellum and .45 ACP calibers. It will not have a blowback slide; instead it has a T-shaped cocking handle on the rear.[13] As TDI, KRISS also announced a 12-gauge shotgun called the MVS and a .50 BMG heavy machine gun using a double Super V mechanism called the "Disraptor,"[14] but the Disraptor has not been mentioned since their name change, while the MVS was removed from the TDI website in late 2009.

References

  1. ^ "KRISS Vector SMG .45 ACP (LE & MIL only): The next generation of SMG for law enforcement & military operators". KRISS USA. Retrieved 30 November 2012.
  2. ^ "KRISS Vector CRB .45 ACP: Discover the civilian version of the KRISS Vector Carbine". KRISS USA. Retrieved 30 November 2012.
  3. ^ "KRISS Vector SBR .45 ACP: The KRISS Vector SBR is the semi-automatic version of the submachine gun (SMG)". KRISS USA. Retrieved 30 November 2012.
  4. ^ "KRISS Vector SDP .45 ACP: The SDP is the pistol version of the KRISS Vector". KRISS USA. Retrieved 30 November 2012.
  5. ^ "Technology". KRISS USA. Retrieved 14 February 2013.
  6. ^ a b "Firearms accessories / Magazines". KRISS USA. Retrieved 30 November 2012.
  7. ^ "Products". KRISS Arms. Retrieved 30 November 2012.
  8. ^ "Technology". KRISS Arms. Retrieved 26 November 2015.
  9. ^ https://www.youtube.com/watch?v=pV8vfXzY0TQ
  10. ^ "KRISS Super V Glock 30 MagEx". Tactical-Life.com. Retrieved 18 December 2015.
  11. ^ "Photos: Hands-on with the New 9mm Kriss Vector at Big 3 East". Outdoorhub. Retrieved 18 December 2015.
  12. ^ Crane, David (4 February 2011). "KRISS K10 Super V Vector XSMG Multi-Caliber Submachine Gun (SMG) and DEFIANCE Silencers/Sound Suppressors: Redesigned and Improved .45 ACP/9mm/.40 S&W Subgun for Special Operations Forces (SOF) and Close Quarters Battle (CQB) Applications (SHOT Show 2011 Photos!)". Featured, Personal Defense Weapons, Special Operations, Submachine Guns. DefenseReview.com.
  13. ^ Johnson, Steve (16 April 2010). "The KRISS KARD: New pistol from KRISS Systems". The Firearm Blog. Retrieved 14 December 2012.
  14. ^ "Technology Overview (2008 archive copy)". TDI Inc official website. 6 August 2008. Retrieved 18 December 2015.
Retrieved from "https://en.wikipedia.org/w/index.php?title=KRISS_Vector&oldid=702200414"