LNWR DX Goods class

Edit links
From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Slambo (talk | contribs) at 16:53, 2 October 2016 (added Category:Standard gauge locomotives of Great Britain using HotCat). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

LNWR DX Goods Class [1] [2]
No. 578 in original condition and livery
Type and origin
Power typeSteam
DesignerJohn Ramsbottom
BuilderCrewe works
Build date1858–1862
Total produced943
Specifications
Configuration:
​
 • Whyte0-6-0
Gauge4 ft 8+1⁄2 in (1,435 mm)
Driver dia.5 ft 2 in (1.575 m)
Total weight27 long tons (27 t)
(29 long tons (29 t) when fueled)
Water cap.2,000 imp gal (9,100 L)
Firebox:​
 • Grate area15 sq ft (1.4 m2)[1]
or 17.1 sq ft (1.59 m2)[2]
Boiler4 ft 2 in (1.27 m) diameter
x 10 ft 6 in (3.20 m) length
Boiler pressure120 psi (0.83 MPa)
Heating surface1,074 sq ft (99.8 m2)
Cylinderstwo, inside
Cylinder size17 in (430 mm) diameter,
24 in (610 mm) stroke
Valve gearStephenson
Performance figures
Tractive effort11,410 lbf (50.8 kN)
Career
OperatorsLondon and North Western Railway, Lancashire and Yorkshire Railway
Withdrawn1902–1930
DispositionAll scrapped

The London and North Western Railway (LNWR) DX Goods class was a class of 0-6-0 steam locomotive, designed by John Ramsbottom for freight duties. 943 were constructed making them the largest single class of locomotives built in the United Kingdom.

History

No. 2022 Francis Webb rebuild, Special DX in photographic grey livery

The "DX" goods engine was the first original design produced by Ramsbottom, shortly after becoming Locomotive Superintendent of the Northern Division. An experimental prototype was developed at Longsight whilst Ramsbottom was only in charge of the North-Eastern Division.[1] The first regular example was completed at Crewe in September 1858, and was given the running number 355. This was the 399th locomotive built at Crewe, but it was the practice of the LNWR to reuse the numbers of withdrawn locomotives.[1]

The first DX, No. 355, was named Hardman, and carried the name on a curved brass plate above the driving wheels. It was painted in the same dark green livery as used by Ramsbottom's predecessor, Francis Trevithick, but edged with a single black line. Fifty-four of the early DX locomotives were given names, but all were removed by 1864, with some re-used on passenger locomotives.

Four 0-4-2 versions of this locomotive type were built by Robert Stephenson and supplied to the Sydney Railway Company in 1855 as the first motive power for the new railway company. They were virtually identical in specification, except for slightly larger driving wheels at 5 ft 6 in (1.676 m) diameter and cylinders being a smaller 16-inch (410 mm) bore than the 17 in (432 mm) of the original design.

857 examples of Ramsbottom’s standard goods design were built for the LNWR at Crewe works between 1858 and 1872.[4][5] The class has been described as ‘the earliest example of standardization and mass productions of locomotives on a large scale,'[6] and ‘a remarkable instance of standardisation at a time when most railways had many different classes, each class with only few engines.’.[2] During the 1870s driving cabs were added. 278 examples of a saddle tank version of the design were built after 1870, known as the LNWR Special Tank.

In addition to the 857 examples used by the LNWR, a further 86 examples of the original design were constructed at Crewe for the Lancashire and Yorkshire Railway between 1871 and 1874.[1] This alarmed independent locomotive manufacturers, who sought an injunction to stop the practice;[7] granted on December 16, 1875.[8] In April 1881 Francis Webb rebuilt 500 examples with a new 150 psi boiler and vacuum brakes for working passenger trains. These became known as ‘Special’ (or vacuum) DX’s.[9]

Accidents and incidents

  • On 12 January 1899, locomotive 1418 was hauling a freight train that was derailed at Penmaenmawr, Caernarfonshire due to the trackbed being washed away in a storm. Both locomotive crew were killed.[10]

Withdrawals

Withdrawals began in 1902 but there were still 88 in existence on the formation of the London Midland and Scottish Railway in 1923. The last survivor was withdrawn in 1930.[11] All were scrapped.

References

  1. ^ a b c d e Nock, O.S. (1952). The Premier Line - The Story of London & North Western Locomotives. London: Ian Allan. pp. 51–53.
  2. ^ a b c London and North Western Railway Society (1999). "Goods Engines of LNWR: DX". Retrieved 6 June 2012.
  3. ^ Baxter 1978, pp. 124–130.
  4. ^ Baxter 1977, p. 12.
  5. ^ Baxter 1978, pp. 124–157.
  6. ^ Casserley, H.C. (1960). Historic locomotive pocket book. London: Batsford. pp. 124–157.
  7. ^ Kris Ward (2004). "The Locomotive Manufacturers Association". Leeds Engine Builders. Retrieved 2014-01-02.
  8. ^ National Rail Museum (1997). "Records of the Locomotive Manufacturers' Association" (PDF). p. 7. Retrieved 2014-01-02. ORDER in Perpetual Injunction in case of Attorney General ... against London & North Western Railway Co & Richard Moon ... restraining latter from manufacturing locomotive engines or other rolling stock for sale or hire on other than their own railway, 16 Dec 1875 {{cite web}}: line feed character in |quote= at position 207 (help)
  9. ^ London and North Western Railway Society (1999). "Goods Engines of LNWR: Special DX". Retrieved 6 June 2012.
  10. ^ Trevena 1981, pp. 16–17.
  11. ^ Casserley & Johnson 1974, p. 7.
Retrieved from "https://en.wikipedia.org/w/index.php?title=LNWR_DX_Goods_class&oldid=742255273"