Jump to content

Lomo LC-A

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Sadads (talk | contribs) at 14:36, 2 January 2016 (link light meter using Find link). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

LOMO LC-A
LOMO LC-A camera
Overview
TypeCompact, point and shoot
Released1984
Lens
LensFixed, Minitar 1 32mm f/2.8
Sensor/medium
Film format35mm (135)
Film size36mm x 24mm
Film speed25-400
Film advanceManual
Film rewindManual
Focusing
Focus modesManual, zone focus (0.8m, 1.5m, 3m, )
Exposure/metering
Exposure modesProgrammed auto, manual with fixed shutter speed
Exposure meteringCadmium Sulphide (CdS light meter
Flash
FlashHot shoe only
Flash synchronization1/60s; rear sync. only
Shutter
ShutterElectronically controlled
Shutter speed range2m to 1/500s
General
BatteryThree S76
Dimensions107 x 68 x 43.5 mm
Weight250g

The LOMO LC-A (Lomo Kompakt Automat) is a fixed lens, 35 mm film, leaf shutter, zone focus, compact camera introduced in 1984. The design is based on the Cosina CX-2.

In 2005, production of the original Lomo LC-A was discontinued. Its replacement, the LC-A+, was introduced in 2006 and production moved to China. The LC-A+ featured the original LC-A lens manufactured by LOMO in Russia. This changed in 2007 and lenses on subsequent models have been made in China.[1] Some LC-As were sold badged as Zenith,[2] this label was only a sticker underneath the lens. Zenit (Zenith in some countries) is a trademark of KMZ (Krasnogorsk Mechanical Works).

Operation

The only automatic function offered by the LC-A is exposure. Film loading, winding, rewinding, focus are accomplished manually. Aperture can also be set manually, the shutter speed being fixed at 160 s (this ability was removed from the LC-A+).

Exposure is completely automatic when the camera is set to "A"; the shutter speeds range from 2 minutes to 1500 s. The aperture range is f/2.8 to f/16. The automatic exposure system compensates for changes in light levels after the shutter is opened by increasing or decreasing the shutter speed. This, in conjunction with the rear-curtain flash-sync, results in interesting effects with flash photography in low ambient light levels.

The lens is focused by selecting one of four zones (0.8 m, 1.5 m, 3 m or ). Older versions of the camera feature viewfinder icons showing the currently selected focus zone, a feature omitted from later models.

A battery checking feature uses a LED inside the viewfinder; if there is sufficient power this illuminates whenever the shutter release button is lightly depressed. Another viewfinder LED illuminates whenever the camera's chosen shutter speed is below 130 s.

Lomo LC-A Viewfinder

Body design

The size and shape is very close to that of the Cosina CX-2, the main difference being that the lens bezel is fixed (unlike the rotating one of the CX-2). Power is supplied by three 1.5v Silver Oxide cells (S76, LR44).

See also

References