Mid-Canada Line Site 050 Fort Albany
This article relies largely or entirely on a single source. (September 2013) |
Mid-Canada Line Site 050 Fort Albany | |
---|---|
Part of Mid-Canada Line | |
Fort Albany, Ontario, Canada | |
Coordinates | 52°12′36″N 81°40′05″W / 52.210°N 81.668°W |
Site information | |
Controlled by | Royal Canadian Air Force |
Condition | Remediated |
Site history | |
Built by | Royal Canadian Air Force |
In use | 1957-1965 |
Demolished | 2010 |
Mid-Canada Line Site 050 Fort Albany was a part of the Mid-Canada Line air defence network. During the late 1950s, the Mid-Canada Line (MCL) was developed as a secondary line of detection in case enemy aircraft penetrated the Distant Early Warning Line. This consisted of approximately 90 unmanned sites and eight Sector Control Stations located along the 55th parallel. Each site sent out a radio beam to its neighbouring site. If an aircraft interrupted the beam, an intruder alarm would sound.
Fort Albany was chosen as a relay station for signals coming in from the Sector Control Site at RCAF Station Winisk and would retransmit those signals to Mid-Canada Line Site 060 Relay via tropospheric scatter (troposcatter).
MCL Site 050 ceased operations as a troposcatter repeater in April 1965 when the Mid-Canada Line was no longer economically feasible or required due to improvements in technology.
The site was remediated in 2010 when all contaminated soil was removed from the area after it was determined the site was contaminated with PCBs and hydrocarbons.[1]
References
- ^ "A Look At The Land Is Everything Growing Well Mid-Canada Line Radar Sites" (PDF), A Look At The Land Is Everything Growing Well Mid-Canada Line Radar Sites, retrieved 2013-09-01
{{citation}}
:|format=
requires|url=
(help)