Oklahoma State Highway 270
Route information | ||||
---|---|---|---|---|
Maintained by ODOT | ||||
Length | 14.45 mi[1][2] (23.26 km) | |||
Existed | 1979[3] (March 5?[4])–present | |||
Major junctions | ||||
West end | ![]() | |||
East end | ![]() | |||
Location | ||||
Country | United States | |||
State | Oklahoma | |||
Highway system | ||||
| ||||
|
State Highway 270, abbreviated as SH-270, is a highway maintained by the U.S. state of Oklahoma. It runs on a former alignment of US-270 between US-62 in Harrah and US-177 north of Shawnee. (US-270 is now concurrent with Interstate 40 through the area.) The highway is 14.45 miles (23.26 km) long. SH-270 has no lettered spur routes.
Route description
![](http://upload.wikimedia.org/wikipedia/commons/thumb/f/f8/OK-270_west_terminus.jpg/220px-OK-270_west_terminus.jpg)
State Highway 270 begins at US-62 in Harrah, in Oklahoma County. The road runs through town on a southeast course, paralleling a rail line. As it leaves town, the highway gradually curves to the south. SH-270 runs along Harrah Road to S.E. 29th Street, where it makes a hard left, turning to the east.[5]
SH-270 continues east for one mile (1.6 km) until it crosses into Pottawatomie County, where the name of the road changes to Oklahoma Street. SH-270 then enters McLoud, where it has a brief concurrency with State Highway 102. After leaving McLoud, it then turns back to the southeast, parallel to the same railroad it ran alongside in Harrah. SH-270 turns east upon reaching the small town of Dale. It then crosses over the railroad and the North Canadian River. After passing through Dale, it ends at US-177.[5]
History
Prior to 1979, US-270 ran through Oklahoma City on surface streets. It left the city and ran through Choctaw concurrent with US-62. US-270 split away from US-62 in Harrah, and continued on to Shawnee on what is now SH-270.[6]
On March 5, 1979, US-270 was rerouted to run concurrent with Interstate 40 from south of Calumet in Canadian County through the Oklahoma City metro, exiting the Interstate onto a surface alignment in Shawnee.[4] Presumably, SH-270 was commissioned the same date. The realignment of US-270, with SH-270 on the old alignment between Harrah and Shawnee, appears on the 1979 state map. SH-270 followed the same path in 1979 as it does today.[3]
Junction list
County | Location | mi[7] | km | Destinations | Notes |
---|---|---|---|---|---|
Oklahoma | Harrah | 0.0 | 0.0 | ![]() | Western terminus |
Pottawatomie | McLoud | 7.7 | 12.4 | ![]() | Western end of SH-102 concurrency |
7.9 | 12.7 | ![]() | Eastern end of SH-102 concurrency | ||
| 14.4 | 23.2 | ![]() | Eastern terminus | |
1.000 mi = 1.609 km; 1.000 km = 0.621 mi
|
References
- ^ Oklahoma Department of Transportation (2010–2011). Control Section Maps: Oklahoma County (PDF) (Map) (2010–2011 ed.). Scale not given. Oklahoma City: Oklahoma Department of Transportation. Retrieved 2013-05-03.
{{cite map}}
: CS1 maint: date format (link) - ^ Oklahoma Department of Transportation (2010–2011). Control Section Maps: Pottawatomie County (PDF) (Map) (2010–2011 ed.). Scale not given. Oklahoma City: Oklahoma Department of Transportation. Retrieved 2013-05-03.
{{cite map}}
: CS1 maint: date format (link) - ^ a b Official State Map (PDF) (Map) (1979 ed.). Oklahoma Department of Transportation. Retrieved 2009-01-14.
- ^ a b Oklahoma Department of Transportation, Planning & Research Division. "Memorial Dedication & Revision History - US-270". Retrieved 2009-01-14.
- ^ a b Oklahoma Atlas and Gazetteer (Map). 1:200,000. DeLorme. 2006. p. 43.
- ^ Official State Map (PDF) (Map) (1978 ed.). Oklahoma Department of Transportation. Retrieved 2009-01-14.
- ^ Google (2013-05-03). "Oklahoma State Highway 270" (Map). Google Maps. Google. Retrieved 2013-05-03.