Jump to content

Ordnance datum

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by 88.108.75.42 (talk) at 13:14, 15 November 2016 (Change Clarendon Lock to Clarendon Dock). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Vertical references in Europe

In the British Isles, an ordnance datum or OD is a vertical datum used by an ordnance survey as the basis for deriving altitudes on maps. A spot height may be expressed as AOD for "above ordnance datum". Usually mean sea level (MSL) is used for the datum. In particular:

Tunnel datum

Tunnel datum is a datum based on an ordnance datum and used in designing tunnels which pass below sea level. By using a lower datum as the base point, negative numbers can be avoided in calculations, eliminating a possible source of mistakes.

  • for the London Underground, a tunnel datum of ODN −100 m is used;[2] thus a depth of −60 m is 40 m ATD (above tunnel datum)
  • for the Channel Tunnel, a tunnel datum of ODN −200 m is used;[3] thus a depth of −60 m is 140 m ATD

References

  1. ^ a b Irish Grid Reference System from OSI website
  2. ^ "Victoria Station Upgrade Environmental Statement: Main Report" (PDF). Transport for London. 2007-11-15. pp. 2–6, §2.5.4, fn 2. Retrieved 2008-07-28.
  3. ^ Radcliffe, Eric (1995). "Control and Construction Surveys". In Colin J Kirkland (ed.). Engineering the Channel Tunnel. Taylor & Francis. p. 53. ISBN 0-419-17920-8.