Jump to content

Ovako

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Doprendek (talk | contribs) at 02:09, 8 October 2018 (removed Category:1969 in Finland; added Category:1969 establishments in Finland using HotCat). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Ovako Group AB
IndustrySteel
Founded1969
HeadquartersStockholm, Sweden
Number of locations
11
Area served
Worldwide
Key people
Joakim Olsson, chairman Marcus Hedblom, president and chief executive officer
ProductsSteel products,
Bars, tubes and rings
Number of employees
2 905 (end 2014)
ParentNippon Steel Edit this on Wikidata
Websitehttp://www.ovako.com

Ovako is a European producer and developer of steel products for, and in cooperation with, its customers in the ball bearing, transport and manufacturing industries. It is owned by Nippon Steel.

The production is based on recycled scrap and includes steel in the form of bar, tube, ring and pre-components. Ovako is one of the world’s largest manufacturers of seamless tubes for the bearing industry.[1]

Operations

Ovako produces bars, tubes, rings and pre-components. Ovako also produces steels for mining, rock drilling and construction applications.[2] The company has 10 production sites in Sweden, Finland, the Netherlands, Germany and Italy, and several sales companies in Europe, Asia and the United States.

Ovako steel is made from recycled scrap that is then refined and transformed into products such as hot-rolled or cold-rolled bars with various profiles and forms of processing, tubes, rings and pre-components.

Ovako's customers are primarily the European engineering industry and its subcontractors, for example makers of trucks, contracting plant and industrial applications, the mining industry and the wind power industry. The majority of Ovako's products are sold to customers in Europe but steel is also exported to North America and Asia.[citation needed]

Sales in 2015 were EUR 834 million and the number of employees at the end of 2015 was 2 905. Operations are divided into four business areas: Hofors, Hällefors, Bar Imatra and Bar SmeBox.

Marcus Hedblom has been CEO of Ovako since 2015. The chairman of Ovako's board of directors is Joakim Olsson.

Products

Ovako operates on the market for long, low alloy steel products. The majority of production consists of bars, tubes and rings that are used in items such as ball bearings, products for the automotive industry, hydraulic cylinders and rock drills.

Ovako specialises in steel with a high degree of purity and low oxygen content, steel with improved machining properties and boron steel with high abrasion resistance. Ovako is Europe's biggest manufacturer of piston rods for the hydraulics industry via its CROMAX group of companies. These are low carbon, hard chromium-plated rods of high-strength steel.[citation needed]

Production sites

Ovako has 10 production sites: Boxholm, Forsbacka, Hallstahammar, Hofors,[3][4] Hällefors and Smedjebacken in Sweden, Imatra in Finland, Molinella in Italy, Redon in France and Almelo in the Netherlands. The company also has sales offices in a number of countries worldwide.

History

Ovako's production is a further development of some of the ironworks set up in Sweden in the 17th and 18th centuries in places such as Hofors, Boxholm and Hällefors. The ironworks gradually grew into major industrial centers and subsequently belonged to the companies that merged to form Ovako today.[citation needed]

1900s-1950s

Ball bearing steel was produced in Sweden at the beginning of the 20th century. In 1916, SKF[5] acquired Hofors[6] Bruk,[7] followed in 1958 by Hellefors[8] Bruk.[9] 1935 saw the start of production of steel in Imatra, Finland, where Ovako still operates today, as it does in Hofors and Hällefors.

1960s-1970s

The steel industry developed, and new technology meant that it was possible to produce steel of higher quality in a shorter time. The predecessors of what is Ovako today gradually began to focus production on special steel. During the same period, the steelworks in Smedjebacken, Hofors and Imatra supplied increasing volumes of steel to the automotive and engineering industries.

In 1969, the Finnish steel companies Oy Vuoksenniska Ab and Oy Fiskars Ab formed a joint company: Ovako. In 1972, Wärtsilä became a shareholder in the company.

1980s-1990s

In 1981, Smedjebackens Walsverk and Boxholms AB merged to form Smedjebacken-Boxholm Stål AB. In 1988, the company was acquired by Welbond, which subsequently changed its name to Fundia.

In 1986, Ovako Steel was formed via a merger of SKF Steel and Ovako. In 1991, SKF became sole owner of Ovako Steel, while operations in Imatra continued under the name Imatra Steel. In the same year, Fundia was acquired by Rautaruukki Oy and Norsk Jern Holding A/S.

2000s-2010s

In 2005, the present company Ovako was formed via a merger of Fundia, Ovako Steel and Imatra Steel. The company is owned jointly by Rautaruukki, SKF and Wärtsila. In 2006, Ovako was sold to Pampus Industrie Beteiligungen and the Dutch investors Hombergh Holdings BV and WP de Pundert Ventures BV. In 2007, Pampus Industrie Beteiligungen became the sole owner.

In 2010, Ovako was sold to Triton, which took over everything except the wire rod division from the company.

In 2018 Ovako was sold to Nippon Steel.

Management and board of directors

Management
  • Marcus Hedblom, CEO
  • Ola Salmén, interim CFO
  • Karin Lagerstedt Woolford, EVP Group HR, Communication & SHE
  • Göran Nyström, EVP Group Marketing & Technology
  • Janne Pirttijoki, president, Business Unit Bar Imatra
  • Rickard Qvarfort, president, Business Unit Bar SmeBox
  • Mathias Tillman, president, Business Hällefors and EVP Group Sales
  • Carl-Michael Raihle, president, Business Unit Hofors
Board of directors
  • Joakim Olsson, chairman of the board
  • Martin Ivert, member of the board
  • Nizar Ghoussaini, member of the board
  • Johan Pernvi, member of the board
  • Sakari Tamminen, member of the board
  • Oskari Eskola, member of the board
  • Timo Viiperi, employee representative
  • Robert Nilsson, employee representative

References

  1. ^ "Versatile alloys and seamless tubes". Product Engineering Solutions Magazine.
  2. ^ "New steels for mines and drilling". Mining World.
  3. ^ "The steel industry reinvents itself". KTH Royal Institute of Technology.
  4. ^ "Ovako Steel invests for the future". Evolution Magazine.
  5. ^ SKF
  6. ^ Hofors
  7. ^ sv:Hofors bruk,
  8. ^ Hällefors
  9. ^ sv:Hellefors Bruks AB