Plate scale

The plate scale of a telescope connects the angular separation of an object with the linear separation of its image at the focal plane

If focal length $f$ is measured in mm, the plate scale in radians per mm is given by angular separation θ and the linear separation of the image at the focal plane s, or by simply the focal length f:

$p={\frac {\theta }{s}}={\frac {1}{f}}\ ,$

since

${s}{=}{f}{\theta }\ .$

Plate scale is usually expressed in arc-seconds per mm:

$p={\frac {206265}{f}},$

where f is in mm, or expressed in arc-seconds per pixel after further division through the pixel scale.

Plate scale on JWST FGS/NIRISS

The plate scale of the James Webb Space Telescope component Fine Guidance Sensor and Near Infrared Imager and Slitless Spectrograph is about 0.065 arcsec/pixel. It uses a 2048 x 2048 pixel array with a pixel size of 18 microns a side with a field of view of 2.2' x 2.2'

See also

• Photographic plate