Jump to content

Pulse 500

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Hmainsbot1 (talk | contribs) at 05:00, 29 July 2012 (AWB general fixes and delink dates per WP:DATELINK, WP:YEARLINK and MOS:UNLINKYEARS using AWB (8097)). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Pulse 500
ManufacturerMuz
Production2001
Class500 cc
EngineSwissauto two-stroke V4 500 cc

The Pulse GP team was formed by Dave Stewart, ex-team manager of BSL. Stewart had left BSL at the end of 2000 with the intention of setting up his own European-based GP team the following year. The Pulse 500 competed in the 2001 500 cc World Championship.

The team purchased the Muz 500, a two-stroke V4 machine which had competed in the 1999 500 cc Championship. The machines, while fast and showing potential in 1999, had been technically unchanged since then and as such were two years behind the opposition in development. The Pulse team was also severely underfunded and with no major sponsor, so no pre-season testing or development work was carried out on the bikes.

Riders

Having worked with Mark Willis on the BSL, team manager Stewart offered him a seat on the Pulse. The second rider was Jason Vincent who had spent several seasons in the 250 cc class, finishing 11th in that class in the previous year. Both riders faced an uphill struggle with the Pulse however, and were usually relegated to the back of the grid. Development of the bike was practically stagnant: plans were made to replace the original Mikuni carburettors with Keihins, but this never happened.

The bike only achieved one point-scoring race, ridden by Willis at the Italian GP, finishing 13th. Vincent, though consistently a better qualifier, had a best race result of 16th.

Finally, the financial pressure became too great for the team and it was not to see out the full season, withdrawing in July 2001 before the Czech GP. In total the Pulse 500 raced in 9 of the 16 races of the season.

Specifications

Pulse 500 Specifications
Engine Type: 2-stroke water-cooled V4
Displacement: 499.27 cc
Max Power: 200 BHP @ 12500 rpm
Carburation Type: 4 Mikuni carbs
Ignition: CDI digital
Clutch: Dry multiple discs
Transmission: 6-speed cassette type
Final Drive: Chain
Frame Type: Twin spar aluminum
Suspension: Front: Inverted telescopic
Rear: Ohlins mono shock
Tyres: Michelin
Wheel: Front: 3.5 x 17 inches
Rear: 6.0 x 17 inches
Brake System: Front: Carbon composite disc (320 mm), Nissin 4 pot calipers
Rear: steel disc (220 mm)
Overall Length: 2040 mm
Overall Width: 490 mm
Wheelbase: 1410 mm
Weight: 129 kg (without tank)
Fuel Tank: 35L

References