Jump to content

Radio-frequency quadrupole

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Jonesey95 (talk | contribs) at 03:02, 18 June 2013 (Removing wikilink from title parameter of citation to fix Help:CS1_errors#Wikilink_embedded_in_URL_title). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

A radio-frequency quadrupole (RFQ) is a linear accelerator component[1] generally used at low beam energies, roughly 50keV to 3MeV. It is similar in concept to a quadrupole mass analyser but its purpose is to accelerate a single-species beam (rather than perform mass spectrometry on a multiple-species beam).

The Radio-frequency quadrupole from the reaccelerator (ReA3) at the National Superconducting Cyclotron Laboratory (NSCL) at Michigan State University.

The RFQ is a combined-function component that both accelerates and focuses the beam of charged particles.

Invented by Soviet physicists I. M. Kapchinsky and Vladimir Teplyakov in 1970, the RFQ is used as an injector by major laboratories and industries throughout the world for radiofrequency linear accelerators.[2]

References

  1. ^ "The ISIS neutron source RFQ" (PDF).
  2. ^ Reiser, Martin (2008). Theory and design of charged particle beams (2nd ed.). Weinheim: Wiley-VCH. p. 6. ISBN 9783527407415. {{cite book}}: Cite has empty unknown parameter: |coauthors= (help)