Jump to content

Schreder HP-18

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Rachmat04 (talk | contribs) at 16:34, 15 October 2016 ((GR) File renamed: File:4X-GHD Habonim 27-06-2014a.jpgFile:Schreder HP-18 4X-GHD at Habonim Israel 27-06-2014.jpg File renaming criterion #2: To change from a meaningless or ambiguous name to a na...). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

HP-18
An HP-18 dis-assembled prior to display at the Paradive Flight Gallery in Habonim
Role Club (formerly 15 metre) class Sailplane
Manufacturer Homebuilt
Designer Richard Schreder
Number built 180 kits sold[1]

The HP-18 is a Richard Schreder-designed metal Racing Class sailplane that was offered as a kit for homebuilding during the 1970s and 1980s.[2]

Design and development

The HP-18 is a flapped (15-meter) sailplane featuring a V-tail and 90-degree flaps for glidepath control. The fuselage is composed of a prefabricated composite forward fuselage and a semi-monocoque aft fuselage, and features steeply reclined seating and a side-stick controller[2] although modifications using a conventional stick have been made.

Major features:

  • Very low cockpit with reclining seating position
  • Sidestick (changed to conventional stick by some homebuilders)
  • Two-piece canopy (changed to single piece forward opening by some homebuilders)
  • V-tail that folds upwards for easy storage
  • Wing structure composed of spars with caps pre-machined from solid aluminium plate and aluminium wing skins bonded to closely spaced foam ribs
  • Fiberglass fuselage pod, wing tip skids and tail fairings
  • Aluminium tail cone
  • Winglets added by some homebuilders
  • Water ballast carried inside the hollow aluminium wing spars
  • Typical Schreder trailing edge flaps/airbrakes partially interconnected with the ailerons

Variants

As most homebuilts, the HP-18 has been constructed with many variations in detail. Perhaps the most significant version is the Super HP-18 developed by Canadians Ed Hollestelle and Udo Rumpf, which features a modified wing airfoil, winglets, a front-hinged canopy, conventional control stick and higher ballast capacity.

Aircraft on display

Specifications

General characteristics

Performance

  • Maximum glide ratio: 38

References

  1. ^ Said, Bob: 1983 Sailplane Directory, Soaring Magazine, page 23. Soaring Society of America, November 1983. USPS 499-920
  2. ^ a b Activate Media (2006). "HP-18 HP Aircraft, LLC". Retrieved 2008-07-24.
  3. ^ "Bryan/Harris HP-18 Sailplane". Retrieved 28 March 2011.
  4. ^ National Soaring Museum (2011). "Sailplanes in Our Collection". Retrieved 26 February 2011.
  5. ^ US Southwest Soaring Museum (2010). "Sailplanes, Hang Gliders & Motor Gliders". Retrieved 26 May 2011.