Jump to content

Stowage factor

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Marcocapelle (talk | contribs) at 15:30, 4 February 2018 (removed Category:Shipping; added Category:Maritime transport using HotCat). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

In shipping, the stowage factor indicates how many cubic metres of space one metric tonne (or cubic feet of space one long ton) of a particular type of cargo occupies in a hold of a cargo ship.[1] It is calculated as the ratio of the stowage space required under normal conditions, including the stowage losses caused by the means of transportation and packaging, to the weight of the cargo.[2] The stowage factor can be used in ship design and as a reference to evaluate the efficiency of use of the cargo space on a ship.

Variability

The stowage factor varies from one type of commodity to another — for example iron ore has a stowage factor of 0.40 (m3/mt), meaning that the space needed by one tonne of ore is only one sixth of that required to stow one tonne of woodchips that have a stowage factor of 2.5. This means that if a ship designed to carry woodchips is loaded with iron ore, only a small part of the hold capacity can be utilized, and a bulk carrier designed to carry iron ore cannot be loaded to the maximum draft with woodchips, leaving much of its deadweight tonnage unutilized. Thus the stowage factor is taken into account in ship design when determining the size of cargo holds, and specialized ships such as ore carriers and car carriers are built for cargoes with a stowage factor that departs significantly from the average.[1]

The stowage factor also depends on the type of packaging, being the lowest for unpackaged bulk cargo. While most commonly used for dry bulk cargo, a stowage factor can also be calculated for liquid bulk cargo and other commodities such as containers or cars. Stowage factors for several types of cargo are presented in the following table.[1]

Type of cargo Stowage factor
(cu ft/LT) (m3/MT)
Iron ore 14 0.40
Grain (heavy) 45 1.30
Coal 48 1.40
Woodchips 90 2.50
Containers (TEU) 56–105 1.6–3.0
Cars 150 4.2
Light crude oil 37.6 1.07
Heavy crude oil 33.7 0.95
Water 35.315 1

See also

References

  1. ^ a b c Stopford, M. Maritime Economics. Third Edition. Roudledge, 2009. Pages 575–576.
  2. ^ Stowage factor. Transport Information Service (TIS). Retrieved 2011-04-11.