This redirect is within the scope of WikiProject Civil engineering, a collaborative effort to improve the coverage of Civil engineering on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.Civil engineeringWikipedia:WikiProject Civil engineeringTemplate:WikiProject Civil engineeringCE articles
• AASHTO Design Guidelines for "Mountable" Curbs
• AASHTO Guide Specification for Seismic Isolation Design
• AASHTO 1998 Article 5.8 AASHTO 1998 Article 5.8
• AASHTO AMRL AASHTO Materials Reference Laboratory (AMRL)
• AASHTO FRPS-1-UL Design of Bonded FRP Systems for Repair and Strengthening of Concrete Bridge Elements
• AASHTO GFRP-1-UL LRFD Bridge Design Guide Specifications for GFRP-Reinforced Concrete Bridge Decks and Traffic Railings, First Edition
• AASHTO GSBTW-1-M-UL Guide Design Specifications for Bridge Temporary Works, 1st Edition with 2008 Interim Revisions
• AASHTO GSHDP-1-UL Guide to Standardized Highway Drainage Products
• AASHTO GSIC-1-UL Guide for Snow and Ice Control
• AASHTO GSSSH-1 (Withdrawn) A Guide to Small Sign Support Hardware
• AASHTO HB-17 Highway Bridges, 17th Edition
• AASHTO LPH-1-UL Guide to Standardized Highway Lighting Pole Hardware
• AASHTO LRFD Section 12 Buried Structures and Tunnel Liners
• AASHTO LRFDUS-6-UL Bridge Design Specifications, Customary U.S. Units, 6th Edition
• AASHTO LTS-5-M Structural Supports for Highway Signs, Luminaires and Traffic Signals, 5th Edition, with 2002, 2003, 2006, 2010 and 2011 Interims
• AASHTO M 182-05(2009) Standard Specification for Burlap Cloth Made from Jute or Kenaf and Cotton Mats
• AASHTO M 182-89 Standard Specification for Burlap Cloth made from Jute or Kenaf
• AASHTO M 320-05 Standard Specification for Performance Graded Asphalt Binder
• AASHTO M 320-10 Standard Specification for Performance Graded Asphalt Binder
• AASHTO M 332-14 Standard Specification for Performance-Graded Asphalt Binder Using Multiple Stress Creep Recovery (MSCR) Test
• AASHTO M030-14-UL Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail
• AASHTO M031MM031-14-UL Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
• AASHTO M036-14-UL Corrugated Steel Pipe, Metallic-Coated, for Sewers and Drains
• AASHTO M043-05-UL Sizes of Aggregate for Road and Bridge Construction
• AASHTO M085-12-UL Portland Cement
• AASHTO M086MM086-09-UL Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
• AASHTO M105-09-UL Gray Iron Castings
• AASHTO M111MM 111-14-UL Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
• AASHTO M120-08-UL (Withdrawn, Repl by ASTM B6) Zinc
• AASHTO M133-12-UL Preservatives and Pressure Treatment Processes for Timber
• AASHTO M140-13-UL Emulsified Asphalt
• AASHTO M143-14-UL Sodium Chloride
• AASHTO M144-14-UL Calcium Chloride
• AASHTO M148-05-UL (Withdrawn) Liquid Membrane-Forming Compounds for Curing Concrete
• AASHTO M152MM152-11-UL Flow Table for Use in Tests of Hydraulic Cement
• AASHTO M153-06-UL Preformed Sponge Rubber and Cork Expansion Joint Fillers for Concrete Paving and Structural Construction
• AASHTO M154-12-UL Air Entraining Admixtures for Concrete
• AASHTO M167MM167-14-UL Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe Arches, and Arches
• AASHTO M168-07-UL Wood Products
• AASHTO M170M-14-UL Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric]
• AASHTO M173-01 (Withdrawn) Concrete Joint Sealer, Hot-Poured Elastic Type
• AASHTO M180-12-UL Corrugated Sheet Steel Beams for Highway Guardrail
• AASHTO M181-10-UL Chain-Link Fence
• AASHTO M182-05-UL Burlap Cloth made from Jute or Kenaf
• AASHTO M190-04-UL Bituminous-Coated Corrugated Metal Culvert Pipe and Pipe-Arches
• AASHTO M194MM194-13-UL Chemical Admixtures for Concrete
• AASHTO M198-10-UL (Withdrawn) Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
• AASHTO M199MM199-14-UL Precast Reinforced Concrete Manhole Sections
• AASHTO M206MM206-14-UL Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
• AASHTO M207MM207-14-UL Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
• AASHTO M208-01-UL Cationic Emulsified Asphalt
• AASHTO M213-01-UL Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)
• AASHTO M218-03-UL Steel Sheet, Zinc-Coated (Galvanized), for Corrugated Steel Pipe
• AASHTO M219-92-UL Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
• AASHTO M224-91-UL Protective Sealers for Portland Cement Concrete
• AASHTO M226-80-UL Viscosity-Graded Asphalt Cement
• AASHTO M235MM235-13-UL Epoxy Resin Adhesives
• AASHTO M237-96-UL Epoxy Resin Adhesives for Bonding Traffic Markers to Hardened Portland Cement and Asphalt Concrete
• AASHTO M240MM240-14-UL Blended Hydraulic Cement
• AASHTO M247-13-UL Glass Beads Used in Traffic Paints
• AASHTO M248-91-UL Ready-Mixed White and Yellow Traffic Paints
• AASHTO M249-12-UL White and Yellow Reflective Thermoplastic Striping Material (Solid Form)
• AASHTO M251-06-UL Plain and Laminated Elastomeric Bridge Bearings
• AASHTO M252-09-UL Corrugated Polyethylene Drainage Pipe
• AASHTO M254-06-UL Corrosion-Resistant Coated Dowel Bars
• AASHTO M268-14-UL Flat and Vertical Retroreflective Sheeting for Traffic Control Applications
• AASHTO M270MM270-12-UL Structural Steel for Bridges
• AASHTO M274-87-UL Steel Sheet, Aluminum-Coated (Type 2), for Corrugated Steel Pipe
• AASHTO M279-14-UL Metallic-Coated, Steel Woven Wire Fence Fabric,
• AASHTO M282-99-UL (Withdrawn) Joint Sealants, Hot-Poured, Elastomeric-Type, for Portland Cement Concrete Pavements
• AASHTO M284MM284-06-UL (Withdrawn) Epoxy-Coated Reinforcing Bars: Materials and Coating Requirements
• AASHTO M288-06-UL Geotextile Specification for Highway Applications
• AASHTO M292MM292-14-UL Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both
• AASHTO M294-13-UL Corrugated Polyethylene Pipe, 300- to 1500-mm (12- to 60- in.) Diameter
• AASHTO M295-11-UL Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
• AASHTO M300-03-UL Inorganic Zinc-Rich Primer
• AASHTO M301-01 (Discontinued) Joint Sealants, Hot Poured, for Concrete and Asphalt Pavements
• AASHTO M302-13-UL Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
• AASHTO M304-11-UL Poly(Vinyl Chloride) (PVC) Profile Wall Drain Pipe and Fittings Based on Controlled Inside Diameter
• AASHTO M306-10-UL Drainage, Sewer, Utility, and Related Castings
• AASHTO M307-13-UL Silica Fume Used in Cementitious Mixtures
• AASHTO M320-10-UL Performance-Graded Asphalt Binder
• AASHTO M323-13-UL Superpave Volumetric Mix Design
• AASHTO M324-12-UL (Withdrawn*) Standard Practice for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
• AASHTO M325-08-UL Stone Matrix Asphalt (SMA)
• AASHTO M326-08-UL Polyethylene (PE) Liner Pipe, 300- to 1600-mm Diameter, Based on Controlled Outside Diameter
• AASHTO M328-14-UL Inertial Profiler
• AASHTO MP 8-05 Standard Specification for Designing Stone Matrix Asphalt
• AASHTO MP016-13-UL Reclaimed Concrete Aggregate for Use as Coarse Aggregate in Hydraulic Cement Concrete
• AASHTO MP018MMP018-09-UL Uncoated, Corrosion-Resistant, Deformed and Plain Alloy, Billet-Steel Bars for Concrete Reinforcement and Dowels
• AASHTO MP019-10-UL Performance-Graded Asphalt Binder Using Multiple Stress Creep Recovery (MSCR) Test
• AASHTO MP020-13-UL Steel-Reinforced Polyethylene (PE) Ribbed Pipe, 300- to 1500-mm (12- to 60-in.) Diameter
• AASHTO MP022-13-UL Fiber-Reinforced Polymer Composite Materials for Highway and Bridge Structures
• AASHTO MP023-14-UL Reclaimed Asphalt Shingles for Use in Asphalt Mixtures
• AASHTO MP024-14-UL Waterborne White and Yellow Traffic Paints
• AASHTO NTPEP Evaluation Centre Ohio Research Institute for Transportation and the Environment (ORITE) Centre for Pipe and Underground Structures (CPUS)
• AASHTO NTPEP-1 National Transportation Product Evaluation Program (NTPEP)
• AASHTO PP 28-03 Practice for Designing Superpave Volumetric Design of HMA
• AASHTO PP 41-02 Standard Practice for Designing Stone Matrix Asphalt (SMA)
• AASHTO R 29-14 Standard Practice for Grading or Verifying the Performance Grade (PG) of an Asphalt Binder
• AASHTO R 35-04 Standard Practice for Superpave Volumetric Design for Hot Mix Asphal
• AASHTO R 35-14 Standard Practice for Superpave Volumetric Design for Asphalt Mixtures
• AASHTO R 66-15 Standard Practice for Sampling Asphalt Materials
• AASHTO R018-10-UL Establishing and Implementing a Quality System for Construction Materials Testing Laboratories
• AASHTO R028-12-UL Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
• AASHTO R029-14-UL Grading or Verifying the Performance Grade (PG) of an Asphalt Binder
• AASHTO R031-09-UL Standard Practice for Evaluation of Protective Coating Systems for Structural Steel
• AASHTO R035-14-UL Superpave Volumetric Design for Hot-Mix Asphalt (HMA)
• AASHTO R046-08-UL Designing Stone Matrix Asphalt (SMA)
• AASHTO R049-09-UL Determination of Low-Temperature Performance Grade (PG) of Asphalt Binders
• AASHTO R051-13-UL (former provisional MP 9) Compost for Erosion/Sediment Control (Filter Berms and Filter Socks)
• AASHTO R056-14-UL (former provisional PP 49) Standard Practice for Certification of Inertial Profiling Systems
• AASHTO R057-14-UL Operating Inertial Profilers and Evaluating Pavement Profiles
• AASHTO R060-12-UL Sampling Freshly Mixed Concrete
• AASHTO RSDG-3 Roadside Design Guide
• AASHTO T 10-02 (2006) Sampling Bituminous Materials
• AASHTO T 166-05 Bulk Specific Gravity of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens
• AASHTO T 166-13 Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Hot Mix Asphalt (HMA) Using Saturated Surface-Dry Specimens
• AASHTO T 176-02 Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test
• AASHTO T 176-08 (2013) Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test
• AASHTO T 209-05 Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
• AASHTO T 275-91 (2000) Bulk Specific Gravity of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
• AASHTO T 283-03 Resistance of Compacted Bituminous Mixtures to Moisture Induced Damage
• AASHTO T 304-96 (2004) Uncompacted Void Content of Fine Aggregate
• AASHTO T 305-97 (2001) Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
• AASHTO T 312-04 Preparing and Determining the Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
• AASHTO T 312-14 Standard Method of Test for Preparing and Determining the Density of Asphalt Mixture Specimens by Means of the Superpave Gyratory Compactor
• AASHTO T 350-14 Standard Method of Test for Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
• AASHTO T 40-02 (2012) Sampling Bituminous Materials
• AASHTO T 84-00 (2004) Specific Gravity and Absorption of Fine Aggregate
• AASHTO T 85-91 (2004) Specific Gravity and Absorption of Coarse Aggregate
• AASHTO T002-91-UL (2010) Sampling of Aggregates
• AASHTO T011-05-UL Materials Finer Than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing
• AASHTO T019MT019-14-UL Bulk Density ("Unit Weight") and Voids in Aggregate
• AASHTO T022-14-UL Compressive Strength of Cylindrical Concrete Specimens
• AASHTO T023-14-UL Making and Curing Concrete Test Specimens in the Field
• AASHTO T027-14-UL Sieve Analysis of Fine and Coarse Aggregates
• AASHTO T040-02-UL Sampling Bituminous Materials
• AASHTO T044-14-UL Solubility of Bituminous Materials
• AASHTO T048-06-UL Flash and Fire Points by Cleveland Open Cup
• AASHTO T049-14-UL Penetration of Bituminous Materials
• AASHTO T053-11-UL Softening Point of Asphalt Binder (Ring and Ball Apparatus)
• AASHTO T059-13-UL Testing Emulsified Asphalts
• AASHTO T084-13-UL Specific Gravity and Absorption of Fine Aggregate
• AASHTO T085-14-UL Specific Gravity and Absorption of Coarse Aggregate
• AASHTO T088-13-UL Particle Size Analysis of Soils
• AASHTO T089-13-UL Test for Determining the Liquid Limit of Soils
• AASHTO T090-14-UL Determining the Plastic Limit and Plasticity Index of Soils
• AASHTO T096-02-UL Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
• AASHTO T099-10-UL Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop
• AASHTO T104-99-UL Soundess of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate
• AASHTO T119MT119-13-UL Slump of Hydraulic Cement Concrete
• AASHTO T132-87-UL Tensile Strength of Hydraulic Cement Mortars
• AASHTO T157-12-UL Method of Test for Air-Entraining Admixtures for Concrete
• AASHTO T166-13-UL Bulk Specific Gravity of Compacted Hot-Mix Asphalt Using Saturated Surface-Dry Specimens
• AASHTO T176-08-UL Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test
• AASHTO T195-11-UL Determining Degree of Particle Coating of Asphalt Mixtures
• AASHTO T196MT196-11-UL Air Content of Freshly Mixed Concrete by the Volumetric Method
• AASHTO T209-12-UL Theoretical Maximum Specific Gravity and Density of Hot-Mix Asphalt Paving Mixtures
• AASHTO T237-05-UL Testing Epoxy Resin Adhesive
• AASHTO T240-13-UL Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
• AASHTO T250-05-UL Thermoplastic Traffic Line Material
• AASHTO T259-02-UL Resistance of Concrete to Chloride Ion Penetration
• AASHTO T260-97-UL Sampling and Testing for Chloride Ion in Concrete and Concrete Raw Materials
• AASHTO T275-07-UL Bulk Specific Gravity of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens
• AASHTO T277-07-UL Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
• AASHTO T283-14-UL Resistance of Compacted Hot-Mix Asphalt (HMA) to Moisture-Induced Damage
• AASHTO T288-12-UL Test for Determining Minimum Laboratory Soil Resistivity
• AASHTO T289-91-UL Test for Determining pH of Soil for Use in Corrosion Testing
• AASHTO T290-95-UL Test for Determining Water-Soluble Sulfate Ion Content in Soil
• AASHTO T291-94-UL Test for Determining Water-Soluble Chloride Ion Content in Soil
• AASHTO T300-11-UL Force Ductility Test of Asphalt Materials
• AASHTO T301-13-UL Elastic Recovery Test of Asphalt Materials by Means of a Ductilometer
• AASHTO T304-11-UL Uncompacted Void Content of Fine Aggregate
• AASHTO T305-14-UL Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
• AASHTO T307-99-UL Determining the Resilient Modulus of Soils and Aggregate Materials
• AASHTO T312-14-UL Preparing and Determining the Density of Hot-Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
• AASHTO T313-12-UL Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
• AASHTO T314-12-UL Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
• AASHTO T315-12-UL Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
• AASHTO T316-13-UL Viscosity Determination of Asphalt Binder Using Rotational Viscometer
• AASHTO T336-11-UL Coefficient of Thermal Expansion of Hydraulic Cement Concrete
• AASHTO TF25-1-UL Guide Specifications for Geotextiles in Separate Applications (does not represent current technical information)
• AASHTO TF36-1-UL Fiber Reinforced Concrete
• AASHTO TP059-14-UL Determining Air Content of Hardened Portland Cement Concrete by High-Pressure Air Meter
• AASHTO TP070-13-UL Multiple Stress Creep Recovery (MSCR) Test of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
• AASHTO TP087-10-UL Measure Low Temperature Flexural Creep Stiffness of Bituminous Sealants and Fillers by Bending Beam Rheometer (BBR)
• AASHTO TP096-11-UL Method of Test for Protective Sealers for Portland Cement Concrete
• AASJHTO R 28-12 UL Standard Practice for Accelerated Aging of Asphalt Binder Using a Pre — Preceding unsigned comment added by Olteanugb (talk • contribs) 07:17, 5 September 2018 (UTC)[reply]
