User:Cincy21/Physical vapor deposition
Physical vapor deposition (PVD), sometimes (especially in single-crystal growth contexts) called physical vapor transport (PVT), describes a variety of vacuum deposition methods that can be used to produce thin films and coatings. PVD is characterized by a process in which the material goes from a condensed phase to a vapor phase and then back to a thin film condensed phase. The most common PVD processes are sputtering and evaporation. PVD is used in the manufacture of items that require thin films for mechanical, optical, chemical, or electronic functions. Examples include semiconductor devices such as thin-film solar panels, aluminized PET film for food packaging and balloons, and titanium nitride-coated coated cutting tools for metalworking. Besides PVD tools for fabrication, special smaller tools (mainly for scientific purposes) have been developed.
The source material is unavoidably also deposited on most other surfaces interior to the vacuum chamber, including the fixturing used to hold the parts.
Application: Anisotropic Glasses
[edit]![](http://upload.wikimedia.org/wikipedia/commons/thumb/0/00/Physical_Vapor_Deposition_%28PVD%29.jpg/220px-Physical_Vapor_Deposition_%28PVD%29.jpg)
PVD can be used as an application to make anisotropic glasses of low molecular weight for organic semiconductors.[1] To understand what the properties of this glass are that make it useful, first a brief idea of the mechanism. The parameter needed to allow the formation of this type of glass is molecular mobility and anisotropic structure at the free surface of the glass.[1] The configuration of the polymer is important where it needs to be positioned in a lower energy state before the added molecules bury the material through a deposition. This process of adding molecules to the structure starts to equilibrate and gain mass and bulk out to have more kinetic stability. [1] The packing of molecules here through PVD is face-on, meaning not at the long tail end, allows further overlap of pi orbitals as well which also increases the stability of added molecules and the bonds. The orientation of these added materials is dependent mainly on temperature for when molecules will be deposited or extracted from the molecule.[1] The equilibration of the molecules is what provides the glass with its anisotropic characteristics. The anisotropy of these glasses is valuable in it allows a higher charge carrier mobility and the higher the density of the glass the increase of charge transfer as well.[1] This process of packing in glass in an anisotropic way is valuable due to its versatility and the fact that glass provides added benefits beyond crystals, such as homogeneity and flexibility of composition.
References
[edit]- ^ a b c d e "Anisotropic organic glasses". Current Opinion in Solid State and Materials Science. 22 (2): 49–57. 2018-04-01. doi:10.1016/j.cossms.2017.11.001. ISSN 1359-0286.