User:Int 80h/files/DOS 6.22 NET WATTCP.CFG
< User:Int 80h | files
WATTCP.CFG
[edit]WatCom configuration file, usually found in C:\NET\TOOLS.
This is a shortened version, without any commends and only enabled options.
pkt.vector = 0x60 ; optional
my_ip = dhcp
netmask = $(NETMASK)
gateway = $(REMIP)
domain_to = 0 ; optional
dynamic_host = 0 ; optional
sockdelay = 90 # increase delay from default of 30 seconds
inactive = 0 ; optional
datatimeout = 120 ; optional
debug = 0 ; optional
mss = 512 ; optional
mtu = 552 ; optional
mtu_disc = 0 ; optional
ip6.my_ip = ::FFFF:$(MYIP) ; mandatory
# advanced options
debug.file = wattcp.dbg ; optional
debug.filter = all
debug.proto = arp/rarp/ip/udp/tcp/icmp/igmp
debug.mode = all
debug.stat = 1 ; optional
debug.dns = 1 ; default is 1
debug.rtp = 1 ; default is 1
sk_debug.device = wattcp.sk
sk_debug.openmode = w+ ; default
bind.hostaliases = $(HOSTALIASES) ; optional
bind.red_options = $(RES_OPTIONS) ; optional
syslog.file = ; optional
syslog.host = ; optional
syslog.port = 514 ; optional
syslog.level = emerg/alert/error ; optional
tftp.boot_file = ; optional
tftp.server = ; optional
tftp.timeout = 8 ; optional
tftp.retry = 5 ; optional
tftp.mode = octet ; optional
tftp.port = 0 ; optional
echo.daemon = 0
echo.host = 255.255.255.255
echo.port = 7
discard.daemon = 0
discard.host = 255.255.255.255
discard.port = 9
# configuration of wattcp programs
talk.localuser = <your signature/handle>
talk.screenmode = autocr,split
talk.colors = 1E,1A,71,71,71
talk.alias = joe:joe@some.domain.com
talk.logfile = $(WATTCP.CFG)\talk\talk.log
talk.message = "%s is busy. Try again later.\n"
snuz.tmpdir = $(TEMP)
snuz.tc = $(ETC)\news\snuz.rc
snuz.active = $(ETC)\news\active
snuz.host = news.server.com
snuz.from = joe@some.domain.com
snuz.editor = edit.com
snuz.smtp = "popmail send %H %D %f"
smbpd.workgroup = "my-work-group"
smbpd.printer1name = "my-printer-at-lpt1"
smbpd.printer2name = "my-printer-at-lpt2"
smbpd.printer3name = "my-printer-at-lpt3"
smtp.subdir = $(ETC)\smtpd\mail\
smtp.sessions = 8
snmp.mibfile = $(snmp)\mib.txt
snmp.mib2file = $(snmp)\mib-v2.txt