Jump to content

User:Stefan-S//RE5

From Wikipedia, the free encyclopedia
Suzuki RE5
Suzuki RE5
ManufacturerSuzuki
Productionfrom 1974 to 1976
PredecessorNA
SuccessorNA
Engine497cc/30.3 ci
Wheelbase1,500 millimetres (59 in)
DimensionsL: 2,210 millimetres (87 in)
W: 870 millimetres (34 in)
Weight507 pounds (230 kg) (dry)
573 pounds (260 kg) (wet)
Fuel capacity17 litres (4.5 US gal)


The Suzuki RE5 was a rotary-engine motorcyclemanufactured by the Suzuki Motor Company from 1974 to 1976.


Notes

[edit]

Suzuki's RE5 was one example of the very few Wankel engine motorcycles that were produced. Some of the others were by DKW and Norton Motorcycle Company, e.g. the Norton Interpol 2, Norton Classic, Norton Commander). It was manufactured by the Suzuki Motor Company from 1974 and withdrawn during 1977.[1] Rotary engines produce high power figures from relatively small displacements. All four major Japanese manufacturers had prototypes or plans. Yamaha showed their Rotary at the Tokyo Motor Show in 1972 (the twin rotor RZ-201).[2] Kawasaki tested a prototype[3] as, allegedly, did Honda. Norton[4] and DKW[2] also marketed rotaries along with a small run by Van Veen (this company used a derivative of NSU/Audi engines developed for Citroen).[5] There were only two production models of the RE5, the 1975 M model available in "Firemist Orange" or "Firemist Blue"[6] (Blue was shown as an option on the "A" model brochure although they may never have actually been produced).[7] Many "A" models were probably unsold M models. It is believed that local dealers converted the bikes by using factory supplied kits. Main changes for 1976 included a color change for the tank and side covers, GT750 style instruments, blinkers, tail lights and headlight housing.. The "B" secondary points for overrun were removed on the A model, the chain oiler was removed and a sealed drive chain fitted.[8]


History

[edit]

The RE5 was touted as the future of motorcycling. Indeed, RE5 section chief Shigeyasu Kamiya of Suzuki Motor Corporation stated that they had considered a rotary powered motorcycle as early as the mid 1960's.[9] Basic R and D continued to the end of the decade and culminated in the signing of a technical licence with NSU in November 1970.[9] Suzuki was the 20th firm to do so.[9] The company was at the cutting edge of rotary development and engineered in-house dozens of machines for the Rotary production process. Of these, ten were particularly special and included the machine to cut the trochoid block.[9] This one machine alone took a year to reach experimental status. The company also holds twenty patents in plating as considerable research went into the Composite Electro-Chemical Materials (CEM) which were used to plate the rotor housing. Testing of the running prototypes took two years.[9] The bikes were launched in 1974.[10] Suzuki enlisted astronaut Ed Mitchell, the sixth man to walk on the moon, to introduce the bike and give it his endorsement.[10] No expense was spared and about a dozen motorcycle publications were treated to a week long test ride and instructional session on the motorcycle. Journalists were flown around the U.S. west coast in Citation jets to take their turn riding 5 pre production bikes.[11] This corporate attitude extended to the warranty. It was superior to other motorcycles of the day and a full engine replacement stipulated for any engine problem within the first 12 months or 12,000 miles.[12]


The Japanese approach seemed to pursue the most advanced engineering and design solution to each technical challenge. The rotary engine produced a lot of heat which required a number of sub systems such as water and oil cooling and modifications to more typical engine components such as the exhaust pipes.[13] Ignition was CDI but used two sets of ignition points through vacuum and rpm sensors to light the one NGK gold paladium spark plug.[14] There were three separate oil tanks (sump, gearbox and total loss tank)[15][15] and two oil pumps (one for normal engine lubrication and cooling and one to supply oil specifically for tip seal lubrication).[16] The throttle controlled not only the primary carburetor butterfly but a second valve in the inlet manifold of the secondary throat (the "port" valve) as well as the oil pump which provided lubrication for the tip seals by mixing oil with fuel. Five cables in total were moved by the throttle twist grip.[17] The carburetor was similar to that from a rotary power unit in a car and was complicated by motorcycle standards (of the day). It is speculated that in 1975 many people expected to be able to service their motorcycle themselves and the RE5 simply looked too intimidating.


The RE5 could also be optioned with a full touring kit.[18] This included a large full fairing and windscreen, two saddlebags, a large rack and top box. The fairing included two lockable “gloveboxes” and all three bags were also key locked. Suzuki later made available bolt on exhaust extensions which prevented damage to the underside of the saddle bags by the hot exhaust gases. An optional touring saddle may have been also available.


The bikes styling was specially commissioned by Suzuki to Italian industrial designer Georgetto Giugiaro.[19] The “tin can” instrument cluster encompassed the usual lights but also a low fuel warning light, total loss oil tank light and digital gear indicator.[20] This tubular “can” motif was also used in the tail light and spherical indicator lights finished off the “rotary” theme. That this was a suspected component in the bike’s failure to sell may be evidenced by the change to more conventional styling in the 1976 A model. The bike was allegedly a financial disaster for Suzuki. Losses of more than 30,000 USD per bike have been mooted. In the end, it is believed that around 6,300 bikes entered the market. Of these, around 4,000 were M models and the remainder A models. It is believed that 60% of all units sold were delivered in the United States. The model was still expected to be promoted by sales teams alongside the 1977 model GS750[21] but production had ceased. As of 2010, Suzuki’s newly opened museum in Japan does not feature an RE5. Despite the bike’s uniqueness, this is perhaps the biggest statement as to the impact its release had on the company. The bike is still supported today by Rotary Recycle USA. The company has a large collection of rotary motorcycles generally and specializes in RE5 parts and service.[22]



Test Rider Impressions

[edit]

The RE5 was quite advanced in its steering and overall handling and numerous motorcycle test riders of the day remarked on this, some claiming it the best handling bike out of Japan and close to European marks.[23] It also had excellent ground clearance.[24] The complex B point system (explained below) gave smoother running on overrun [25] and gives some engine braking. Suzuki stopped fitting the B points to the 1976 "A" model[26] and allegedly had dealers disconnect the system on remaining "M" models. It was also noted that the bikes sometimes exhibited a dead spot or hesitation during acceleration as the carburetor transitioned from primary to secondary throat.[27] This is due to poor synchronization between the positions of the primary, port and the secondary carburetor throat valves. There is also some evidence linking this to jetting.[27], possibly an excessively lean primary mixture. The bike is less powerful than Suzuki’s 750 of the day[28] but its greatest attribute is tremendous torque[29]. The bike is smooth compared to many reciprocating engines of the day but has a grinding vibration around 4,000 rpm which was often remarked upon in road tests.[30] Despite speculation about worn or misadjusted components, it is more likely a feature of the engine harmonics. Average fuel consumption is around 37 miles per imperial gallon (31 mp usg[31]) but road tests sometimes achieved results as low as 28.6 (23.8 mp usg) and as high as 43.3 mp imperial gallon (36 mp usg).[32] In the end and once over its novelty, test riders found that other than its handling, it wasn’t superior to more conventional bikes.

Specifications

[edit]

Specifications:[33]

  • Wheels: Front 3.25 x 19, Rear 4.00 x 18.
  • Brakes: Front twin 290 mm/11.39” discs, single piston floating calipers. Rear 180 mm/7.09” drum.
  • Displacement: 497cc/30.3 ci.
  • Compression: 9.4:1.
  • Claimed HP: 62 hp @ 6,500 (actual tested at the rear wheel 47.9436).
  • Claimed Torque: 54.9 ft lbs @ 3,500 (actual tested 45.0).
  • Carburetion: two stage, two barrel 18-32mm Mikuni.
  • Ignition: CDI (incorporating a points system).
  • Fuel: 17 litres (4.5 usg, 3.74 impg) capacity, 85-95 octane.
  • Starting system: Electric, kickstart (the latter intended to be offered only as an option37 ).
  • Performance: Top Speed (tested): 168 kph/105 mph actual.
  • Standing ¼ mile: 14.02 @ 94.24 mph.
  • Wheel Base: 1509 mm/59.1”.
  • Weight (curb with half tank of fuel): 255.4 kg/563 lb.
  • Weight dry: 230 kg/507 lb.

DETAILS

[edit]

Engine

[edit]

Rotor Unit: Single rotor with a capacity of 497cc. The rotor spins on an eccentric shaft in a peritrochoid (Mazda uses an epitrochoid)[34] chamber giving three rotations of the crankshaft for every 360° of rotor travel. Compression ratio is 9.4:1. The eccentric shaft runs on plain bearings[34] which were better than rollers for heat dissipation. Combustion sealing utilised Apex, corner and side seals. At the 3 rotor apexes, tip sealing was accomplished with a three piece seal tensioned by a blade spring. Apex seals were made of a special material known as Ferro Tic which was a combination of sintered ferrous alloy and titanium carbide.[35] The surface of the trochoid chamber which the apex seals rubbed along was coated with a CEM (composite electrochemical material) consisting of nickel silicone carbide. Side sealing used one blade like seal and spring for each rotor face on each side (6 side seals in total). Corner seals and springs finished the isolation of combustion. Blowby gases are recirculated into the combustion process.[36] The rotor spins backward in relation to the motorcycle. Primary power transfer to the clutch and transmission is by duplex chain.[37]

Clutch and Gearbox

[edit]

Wet multiplate clutch and 5 speed constant mesh transmission. Gear box is virtually the same as that fitted to Suzuki’s GT750 watercooled triple. RE5 final drive is by 630 chain via a 14 tooth drive sprocket and 43 tooth unit at the rear wheel.[37]

Carburetion

[edit]

Two stage Mikuni. Five separate carburetor circuits.[38] Suzuki chose to use peripheral ports for the RE5 as they give better high speed running but are known to have low speed issues.[39] This is dealt with by using a two stage carburetor. An 18 mm throat splits into two small peripheral induction tracts.[39] The primary butterfly is directly controlled by one of the 5 throttle cables and this primary circuit gives decent low speed running. A diaphragm controls the secondary carburetor port and this is activated when a set vacuum is reached in the carburetor circuit. This much larger 32 mm port enters the rotor chamber between and slightly below the two small primary ports. Indirectly involved with carburetion is the unique “Port Valve”. This small butterfly valve pivots in the rotor housing inside the secondary port and is directly controlled by another of the throttle cables. Without the port valve, the long induction tract of the secondary port would fill with traces of exhaust gasses whenever the secondary valve was closed. This occurs as the tip of the rotor passes the induction port at the end of the exhaust cycle before beginning the induction cycle.[40] If this was allowed to happen, when the secondary throat finally opened the engine would first swallow an induction charge contaminated with exhaust gasses causing a momentary misfire and felt as a dead spot or hesitation in acceleration. The port valve is therefore effectively timed to remain closed whenever the secondary carburetor throat is closed isolating the induction tract from exhaust gasses. Carburetor tuning involves adjusting cables controlling the primary butterfly and the port valve among other things and is best illustrated by Suzuki Service Bulletin Nine.[41] The carburetor also incorporated a fuel pump which was mechanically actuated from a given throttle opening to enrichen the fuel mixture during acceleration.

Ignition

[edit]

CDI triggered by two sets of points.[40] A basic problem with the rotary engine design is a lack of engine braking partially due to the mass of the rotor. Leaning of the mixture on overrun also contributes to erratic and “lumpy” running. One way to solve the problem is to shut off ignition entirely on overrun but this leads to excessive contamination of the combustion chamber by unwanted deposits which can cause the Apex seals to stick. Suzuki opted for a compromise by using two sets of ignition points. One set of points ran on a dual lobe cam for normal operation firing the rotor every face. The other set ran on a single cam on the same shaft for triggering the sparkplug on overrun.[40] The second set (the B points) were triggered by an rpm sensor (the speed relay) and a vacuum switch which meant that they worked on engine deceleration (high vacuum) and above 1,700 rpm.[40] This system fired the rotor every second face.[40] This kept the combustion chambers relatively clean. It also served to smooth the lumpy feel of the bike as rpm’s reduced on overrun and addressed some issues with backfiring.[40] Engine braking is also significantly improved. The B point system was discontinued on the A. It is believed that the factory also employed mechanics to visit dealerships and disconnect the B points on any M (1975) models still in the showrooms. Suzuki toyed with the idea of two plugs like the Mazda’s but as with so much of their engineering on this bike, over thought the application believing that they would require two plugs of different heat ranges.[9] Thankfully, the idea was dropped and the bike shipped with a single 18mm conical seat gold paladium spark plug housed in a copper insert in the rotor housing (NGK A9EFV).[39]

Cooling

[edit]

The rotary engine places severe thermal stresses on its cases as two sides of rotor are constantly exposed to high ignition and exhaust temperatures while the third side inducts cool fuel/air mixture. To cope with this and probably capitalizing on their previous experience with water cooling, Suzuki opted for a liquid cooled engine using two separate systems. Oil is used to lubricate and cool the internals of the rotor and water cooled the external jacketing. Oil is fed from an engine sump by a trochoid pump at around 100 psi.[16] The oil is then circulated through an oil cooler mounted across the frame and below the radiator. A pressure regulator also acts as a bypass in case of a blockage in the cooler.[16] A centrifugal pump sends coolant around the external rotor jacketing but via an intricate path in an attempt to even out the massive thermal stresses. Liquid enters at the point of highest temperatures (ignition) passing from the right side to the left and then makes a 180° turn returning to the right side passing near the exhaust port. Most of the coolant is then routed to the very large radiator that sits across the frame in front of the bike. Some of the coolant that was not directed to the radiator is now sent around the inlet port and the left side housing. Its passage is once again reversed before flowing to the radiator.[42] The water cooling is thermostatically controlled and a shrouded fan on the right side of the radiator takes care of excessive temperatures switching on at 106°C and cutting when the temperature falls below 100°.[16]

Lubrication

[edit]

Internally the rotor is cooled and lubricated by engine sump oil and the aforementioned trochoid pump. Engine oil is filtered by an easy accessible car type oil filter on the lower right side of the cases. The filter includes an internal bypass valve in case of blockage.[16] Further lubrication specifically for the tip seals is provided by oil from a tank located under the seat. An engine driven metering pump sends oil from this external tank into the carburetor at a ratio of around 100:1.[43] Metering of the oil quantity is mechanically controlled by cables from the throttle grip. The metering pump also provided lubrication for the final drive chain. A second line is routed from the metering pump and around the bike ending just above the drive chain behind the sprocket cover. This feature was also disconnected on the A models by a simple blanking plug at the metering pump. The gearbox is separated from the engine sump and has its own oil supply. Suzuki marketed its own brand of Rotary oil but also approved at least two other oils for use in its rotary engine. Shell Super 10-20-50[39] and Castrol GTX[19] were both endorsed lubricants.

Exhaust

[edit]

Rotary exhaust temperatures are a staggering 927 °C (1,700 °F)[44] and as such, on a motorcycle, required a specialized exhaust system. Suzuki dealt with the problem by first exhausting into a large heavily finned manifold which split the single exhaust into two streams. They then built two twin shelled exhaust pipes which included air cooling ducts. Each muffler contains a stainless steel inner pipe[44] which is a little shorter than the length of the external shell. The internal pipe ends in a removable stinger drilled with numerous holes and wrapped in a fibreglass-like material. The stinger (or Spark Arrestor as Suzuki calls it) exits the exhaust system at the end of the external shell. At the front of each pipe was a small forward facing grille which allowed cool ambient air to be forced into the pipe by the bike’s forward motion and to travel the length of the exhaust between the internal and external pipes.[26] It then flowed through the holes drilled in the stinger mixing with the hot exhaust gasses before exiting the system. Even so, Suzuki found it prudent to fit heat shields on the outside of the pipe to further protect riders and pillions. The bike's sound is unique among its two and four stroke contemporaries but also quite loud.[45] Early in production (December 1974, Frame #11901), Suzuki reduced the size of the spark arrestor tubes[46] which both reduced noise and horse power but the RE5 exhaust note remains particularly distinctive.

References

[edit]
  1. ^ Ayton, C.J. (1982). The Hamlyn Guide to Japanese Motorcycles. Hamlyn Publishing Company.
  2. ^ a b "Rotomotion". Two Wheels Magazine. Kenmure Press Sydney: 8. February 1974.
  3. ^ ""Kawasaki X99"".
  4. ^ "Norton-Triumph's Rotary". Two Wheels Magazine. Kenmure Press Sydney. October 1974.{{cite journal}}: CS1 maint: date and year (link)
  5. ^ "Van Veen OCR 1000. Rotary Stunner". Two Wheels Magazine. Kenmure Press Sydney: 16. March 1975.{{cite journal}}: CS1 maint: date and year (link)
  6. ^ [1]
  7. ^ [2]
  8. ^ New Model Technical Bulletin. Hamamatsu Japan: Suzuki Motor Corporation. 1974. {{cite journal}}: Missing or empty |title= (help)
  9. ^ a b c d e f "How We Did It". Suzuki Cycle Magazine. Suzuki Motor Corporation Hamamatsu Japan. 1974.
  10. ^ a b "Suzuki Rotary Engined Motorcycle". Big Bike Magazine. December 1974.{{cite journal}}: CS1 maint: date and year (link)
  11. ^ "Rotary Meeting". Road Rider Magazine: 19–20. December 1974.{{cite journal}}: CS1 maint: date and year (link)
  12. ^ "Touring Comparison". Cycle World Magazine. New York: CBS Publications: 62. February 1975.{{cite journal}}: CS1 maint: date and year (link)
  13. ^ "Suzuki Joins the Rotary Club". Cycle Guide Magazine. California: Quinn Publications: 28–29. February 1974.{{cite journal}}: CS1 maint: date and year (link)
  14. ^ "The High Roller from Suzuki". Motorcyclist Magazine. California: Petersen Publishing: 23. January 1975.{{cite journal}}: CS1 maint: date and year (link)
  15. ^ a b "Suzuki RE5 Rotary. Suzuki's Dream". Australia Road Bike Book: 6. 1975.
  16. ^ a b c d e "The High Roller from Suzuki". Motorcyclist Magazine. California: Petersen Publishing: 29. January 1975.{{cite journal}}: CS1 maint: date and year (link)
  17. ^ "Eight for the Open Road". Cycle Magazine. New York: Ziff-Davis Publications: 62. August 1975.{{cite journal}}: CS1 maint: date and year (link)
  18. ^ "Just Passin' Through". Cycle World Magazine. New York: CBS Publications. September 1975.{{cite journal}}: CS1 maint: date and year (link)
  19. ^ a b "On a Roll. Suzuki RE5 Rotary". Cycle Magazine. New York: CBS Publications: 56. February 1988.{{cite journal}}: CS1 maint: date and year (link)
  20. ^ "The Rotary Experience". Revs Motorcycle News Magazine. Sydney: Modern Magazines: 22. 24. {{cite journal}}: Check date values in: |date= and |year= / |date= mismatch (help); Unknown parameter |month= ignored (help)
  21. ^ "Confidential, for Suzuki Salesman Only". Suzuki GS750 Sales Manual. Hamamatsu, Japan: Suzuki Motor Co. Ltd.
  22. ^ "Rotary Recycle USA".
  23. ^ "The High Roller from Suzuki". Motorcyclist Magazine. California: Petersen Publishing: 20–23. January 1975.{{cite journal}}: CS1 maint: date and year (link)
  24. ^ "Suzuki RE5 Rotary. Suzuki's Dream". Australia Road Bike Book: 10. 1975.
  25. ^ "Touring Comparison". Cycle World Magazine. New York: CBS Publications: 101. February 1975.{{cite journal}}: CS1 maint: date and year (link)
  26. ^ a b "RE5 Revisited". Cycle Guide Magazine: 74. September 1976.{{cite journal}}: CS1 maint: date and year (link)
  27. ^ a b "Suzuki RE5 Rotary....So Where's the Revolution". Two Wheels Magazine: 40. June 1975.{{cite journal}}: CS1 maint: date and year (link)
  28. ^ "Big Bore Suzi Shootout". Two Wheels Magazine: 40. October 1975.{{cite journal}}: CS1 maint: date and year (link)
  29. ^ "Rotary Meeting". Road Rider Magazine: 20. December 1974.{{cite journal}}: CS1 maint: date and year (link)
  30. ^ "Suzuki RE5 Rotary". Cycle Magazine: 44. January 1975.{{cite journal}}: CS1 maint: date and year (link)
  31. ^ Cycle Magazine. January 1975. {{cite journal}}: Missing or empty |title= (help)CS1 maint: date and year (link)
  32. ^ "Suzuki RE5 Rotary....So Where's the Revolution". Two Wheels Magazine: 43. June 1975.{{cite journal}}: CS1 maint: date and year (link)
  33. ^ Cycle World Magazine. New York: CBS Publications. September 1975. {{cite journal}}: Missing or empty |title= (help)CS1 maint: date and year (link)
  34. ^ a b "Touring Comparison". Cycle World Magazine. New York: CBS Publications: 64. February 1975.{{cite journal}}: CS1 maint: date and year (link)
  35. ^ "The High Roller from Suzuki". Motorcyclist Magazine: 25. January. {{cite journal}}: Check date values in: |date= and |year= / |date= mismatch (help)
  36. ^ "The High Roller from Suzuki". Motorcyclist Magazine: 29–30. January. {{cite journal}}: Check date values in: |date= and |year= / |date= mismatch (help)
  37. ^ a b "Suzuki RE5 Rotary....So Where's the Revolution". Two Wheels Magazine: 41. June 1975.{{cite journal}}: CS1 maint: date and year (link)
  38. ^ "The High Roller from Suzuki". Motorcyclist Magazine. California: Petersen Publishing: 25. January 1975.{{cite journal}}: CS1 maint: date and year (link)
  39. ^ a b c d "Suzuki Rotary Recap". Motorcycle World: 59–61. August 1975.{{cite journal}}: CS1 maint: date and year (link)
  40. ^ a b c d e f "The High Roller from Suzuki". Motorcyclist Magazine. California: Petersen Publishing: 28. January 1975.{{cite journal}}: CS1 maint: date and year (link)
  41. ^ Suzuki Service Bulletin RE-9. Japan: Suzuki Motor Co. Ltd. Hamamatsu. 11. {{cite journal}}: Check date values in: |date= and |year= / |date= mismatch (help); Missing or empty |title= (help); Unknown parameter |month= ignored (help)
  42. ^ "Touring Comparison". Cycle World Magazine. New York: CBS Publications: 101, 106. February 1975.{{cite journal}}: CS1 maint: date and year (link)
  43. ^ "Touring Comparison". Cycle World Magazine. New York: CBS Publications: 66. February 1975.{{cite journal}}: CS1 maint: date and year (link)
  44. ^ a b "Suzuki Rotary Recap". Motorcycle World: 59. August 1975.{{cite journal}}: CS1 maint: date and year (link)
  45. ^ "Touring Comparison". Cycle World Magazine. New York: CBS Publications: 58. February 1975.{{cite journal}}: CS1 maint: date and year (link)
  46. ^ Suzuki Service Bulletin RE-020. 20. {{cite journal}}: Check date values in: |date= and |year= / |date= mismatch (help); Missing or empty |title= (help); Unknown parameter |month= ignored (help)






2 “Rotomotion”. Two Wheels Magazine (February 1974): page 8. Kenmure Press Sydney.


3 http://www.totalmotorcycle.com/photos/prototype-spy-concept/Kawasaki-X99.htm


4 “Norton-Triumph’s Rotary”. Two Wheels Magazine (October 1974). Kenmure Press Sydney.


5 “Van Veen OCR 1000. Rotary Stunner”. Two Wheels Magazine (March 1975): page 16. Kenmure Press Sydney.


6 http://www.suzukicycles.org/photos/RE5/RE5-brochures/1975/1975_RE5-sales1b_640.jpg


7 http://www.suzukicycles.org/photos/RE5/RE5-brochures/1975/1975_RE5-sales1a_640.jpg3


8 “New Model Technical Bulletin” (1974). Suzuki Motor Corporation Hamamatsu Japan.


9 “How We Did It”. Suzuki Cycle Magazine (1974). Suzuki Motor Corporation Hamamatsu Japan.


10 “Suzuki Rotary Engined Motorcycle”. Big Bike Magazine (December 1974).


11 “Rotary Meeting”. Road Rider Magazine (December, 1974): page 19-20. *****


12 “Touring Comparison” Cycle World Magazine (February 1975): page 62. CBS Publications, New York


13 “Suzuki Joins the Rotary Club”. Cycle Guide Magazine (February 1974): pages 28-29. Quinn Publications California.


14 “The High Roller from Suzuki”. Motorcyclist Magazine (January 1975) page 23. Petersen Publishing California.


19 “Suzuki RE5 Rotary. Suzuki’s Dream”. Cycle Australia Road Bike Book (1975): page 6.


16 “The High Roller from Suzuki”. Motorcyclist Magazine (January 1975) page 29. Petersen Publishing California.


17 “Eight for the Open Road”. Cycle Magazine (August 1975) page 62. Ziff-Davis Publications, New York


18 “Just Passin’ Through”. Cycle World Magazine (September 1975). CBS Publications, New York.


19 “On a Roll. Suzuki RE5 Rotary”. Cycle Magazine February (1988): page 56. CBS Publications New York.


20 “The Rotary Experience”. Revs Motorcycle News Magazine (October 24 1975): page 22. Modern Magazines Sydney.


21 Suzuki GS750 Sales manual “Confidential, for Suzuki Salesman Only”. Suzuki Motor Co. Ltd, Hamamatsu, Japan.


22 http://www.rotaryrecycle.com


23 “The High Roller from Suzuki”. Motorcyclist Magazine (January 1975): pages 20-23. Petersen Publishing California.


24 “Suzuki RE5 Rotary Suzuki’s Dream !” Cycle Australia Road Bike Book 1975: page 10.


25 “Touring Comparison” Cycle World Magazine (February 1975): page 101. CBS Publications, New York


26 “RE5 Revisited” Cycle Guide Magazine (September 1976): page 74. Quinn Publications, California.


27 “Suzuki RE5 Rotary....So Where’s the Revolution”. Two Wheels Magazine (June 1975): page 40. Kenmure Press, Sydney


28 “Suzuki RE5 Rotary....So Where’s the Revolution”. Two Wheels Magazine (June 1975): page 40. Kenmure Press, Sydney


29 “Big Bore Suzi Shootout”. Two Wheels Magazine (October 1975): page 40. Kenmure Press, Sydney


30 “Rotary Meeting”. Road Rider Magazine (December, 1974): page 20.


31 “Suzuki RE5 Rotary”. Cycle Magazine (January 1975): page44. Ziff-Davis Publications, New York


32 Cycle Magazine January 1975 Ziff-Davis Publications, New York


33 “Suzuki RE5 Rotary....so where’s the revolution”. Two Wheels Magazine (June 1975): page 43. Kenmure Press, Sydney


34 “Touring Comparison” Cycle World Magazine (February 1975). CBS Publications, New York


35 Cycle World Magazine September 1975 CBS Publications, New York


36 Cycle Magazine January 1975 Ziff-Davis Publications, New York


37 “Suzuki RE5 Rotary. Suzuki’s Dream”. Cycle Australia Road Bike Book (1975): page 5.


38 “Touring Comparison” Cycle World Magazine (February 1975): page 59. CBS Publications, New York


39 “Suzuki RE5 Rotary....So Where’s the Revolution”. Two Wheels Magazine (June 1975): page 43. Kenmure Press, Sydney


40 “Touring Comparison” Cycle World Magazine (February 1975): page 64. CBS Publications, New York


41 “The High Roller from Suzuki”. Motorcyclist Magazine (January 1975): pages 25. Petersen Publishing California.


42 “The High Roller from Suzuki”. Motorcyclist Magazine (January 1975): pages 29-30. Petersen Publishing California.


43 “Suzuki RE5 Rotary....So Where’s the Revolution”. Two Wheels Magazine (June 1975): page 41. Kenmure Press, Sydney


44 “The High Roller from Suzuki”. Motorcyclist Magazine (January 1975): page 25. Petersen Publishing California.


45 “Suzuki Rotary Recap”. Motorcycle World (August 1975): page 59-60.


46 “The High Roller from Suzuki”. Motorcyclist Magazine (January 1975): page 28. Petersen Publishing California.


47 Suzuki Service Bulletin RE-9. (July 11, 1975). Suzuki Motor Co. Ltd. Hamamatsu, Japan.


48 “How We Did It”. Suzuki Cycle Magazine (1974): page 6. Suzuki Motor Corporation Hamamatsu Japan.


49 “Suzuki Rotary Recap”. Motorcycle World (August 1975): page 61.


50 “The High Roller from Suzuki”. Motorcyclist Magazine (January 1975): page 29. Petersen Publishing California.


51 “Touring Comparison” Cycle World Magazine (February 1975): page 101 and 106. CBS Publications, New York


52 “Touring Comparison” Cycle World Magazine (February 1975): page 66. CBS Publications, New York


53 “Suzuki Rotary Recap”. Motorcycle World (August 1975): page 59.


54 “RE5 Revisited”. Cycle Guide Magazine (September 1976): page 74. Quinn Publications, California


55 “Touring Comparison” Cycle World Magazine (February 1975): page 58. CBS Publications, New York


56 Suzuki Service Bulletin RE-020. (June 20, 1975). Suzuki Motor Co. Ltd. Hamamatsu, Japan.






“The Rotary Experience”. Revs Motorcycle News Magazine (October 24 1975): page 24. Modern Magazines Sydney.


 	“Suzuki RE5 Rotary”. Cycle Magazine (January 1975). Ziff-Davis Publications, New York


 	“Suzuki RE5 Rotary”. Hot Rod Magazine (January 1975): page 68. Petersen Publishing, California


“Eight for the Open Road”. Cycle Magazine (August 1975): page 62. Ziff-Davis Publications, New York


“Suzuki RE5 Rotary”. Cycle Magazine (February 1988). CBS Publications, New York


“RE5 Revisited”. Cycle Guide Magazine (September 1976): page 74. Quinn Publications, California


“Suzuki RE5 Rotary....so where’s the revolution”. Two Wheels Magazine (June 1975): page 42. Kenmure Press, Sydney


“Suzuki RE5 Rotary....So Where’s the Revolution”. Two Wheels Magazine (June 1975): page 42. Kenmure Press, Sydney


“The Rotary Experience”. Revs Motorcycle News Magazine (October 24 1975): page 24. Modern Magazines Sydney.


“RE5 Revisited”. Cycle Guide Magazine (September 1976): page 74. Quinn Publications, California


“Suzuki RE5 Rotary”. Cycle Magazine (January 1975): page 38. Ziff-Davis Publications, New York


“Suzuki RE5 Rotary. Suzuki’s Dream”. Cycle Australia Road Bike Book (1975): page 5.


“The Rotary Experience”. Revs Motorcycle News Magazine (October 24 1975): page 23. Modern Magazines Sydney.


“The High Roller from Suzuki”. Motorcyclist Magazine (January 1975): pages 22. Petersen Publishing California.


“Touring Comparison” Cycle World Magazine (February 1975): page 58. CBS Publications, New York


“Eight for the Open Road”. Cycle Magazine (August 1975. Ziff-Davis Publications, New York


“Suzuki RE5 Rotary. Suzuki’s Dream”. Cycle Australia Road Bike Book (1975): page 11.