Jump to content

Welder certification

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by MER-C (talk | contribs) at 12:04, 8 October 2016 (Reverted edits by JakeF4ce007 (talk) to last version by Fraulein451). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Welder certification, (also known as welder qualification) is a process which examines and documents a welder's capability to create welds of acceptable quality following a well defined welding procedure.

Method

Welder certification is based on specially designed tests to determine a welder's skill and ability to deposit sound weld metal. The welder's tests consist of many variables, including the specific welding process, type of metal, thickness, joint design, position, and others. Most often, the test is conducted in accordance with a particular code. The tests can be administered under the auspices of a national or international organization, such as the American Welding Society (AWS), or American Society of Mechanical Engineers (ASME), but manufacturers may specify their own standards and requirements as well. Welders can also be certified in specific welding related professions: for example, American Welding Society certifies welding inspectors and welding instructors, and the American Society of Mechanical Engineers certifies high capacity fossil fuel fired plant operators and several other professions. Most certifications expire after a certain time limit, and have different requirements for renewal or extension of the certification.

In the USA, welder qualification is performed according to AWS, ASME[1] and API [2] standards, which are also used in some other countries. Some States have their own Welder Qualifications that supersede AWS Qualifications, but most defer to AWS, ASME or API.

In Canada, welder qualification is carried out according to CSA Standards and ASME.[1] The ASME code is typically used for pressure vessel and pressure piping applications, and CSA Standards are used for structural, general manufacturing and non-pressure applications. There are 3 major CSA Standards to which welders may be qualified: CSA W47.1[3] for steels (including stainless steels), CSA W47.2[4] for aluminum, and CSA W186[5] for reinforcing bars. Under these CSA standards, welder qualification testing is carried out every 2 years by the Canadian Welding Bureau to ensure ongoing competence.

In Europe, the European Committee for Standardization (CEN) has adopted the ISO standards on welder qualification (ISO 9606),[6] to replace the old European EN 287 series.[7] Operators of automated welding systems are certified according to EN 1418.[8] In Europe welders are frequently certified by third party Inspection Bodies or Personnel Certification Bodies, like The Welding Institute (TWI/CSWIP).[9] Welders involved in the manufacture of equipment that falls within the scope of the Pressure Equipment Directive must be approved by a competent third party which may be either a notified body or a third-party organization recognized by a Member State.[10]

Once a welder passes a test (or a series of tests), their employer or third party involved will certify the ability to pass the test, and the limitations or extent they are qualified to weld, as a written document (welder qualification test record, or WQTR). Normally this document is valid for a limited period (usually for two years), after which the welder must be retested. However some Qualifications are only valid for a single project, while others are unlimited as long as welders do not go beyond a specified length of time without performing that specific type of welding (this period is typically 6 months). Welders must maintain a log to demonstrate they have maintained their Qualifications.

Welding inspector certification

In addition to welders and welding machine operators, there are also schemes to independently certify welding inspectors and related specialities. The duties of the welding inspector are described in ISO 14731;[11] however the requirement for inspector certification are not standardized, so there are differences in requirement between the various schemes. Some notable schemes established by personnel certification bodies are those of the American Welding Society, of the British Institute of Non-Destructive Testing (PCN), of The Welding Institute (CSWIP) and of the Canadian Welding Bureau (CSA W178.2).

The American Welding Society offers the following programs:[12]

  • Certified Associate Welding Inspector
  • Certified Welding Inspector
  • Senior Certified Welding Inspector
  • Certified Radiographic Interpreter [13]

The British Institute of Non-Destructive Testing offers three levels of certification:[14]

  • PCN Level 1
  • PCN Level 2 Weld Inspection
  • PCN Level 3 Weld Inspection with radiographic interpretation

The Welding Institute (TWI) in the United Kingdom offers the following certification scheme:[15]

  • CSWIP 3.0 (Level 1): Visual Welding Inspector
  • CSWIP 3.1 (Level 2): Welding Inspector
  • CSWIP 3.2 (Level 3): Senior Welding Inspector; with or without radiographic interpretation (3.2.1 or 3.2.2 respectively)

The Canadian Welding Bureau offers the following programs:[16]

  • Level 1 Certified Welding Inspector
  • Level 2 Certified Welding Inspector
  • Level 3 Certified Welding Inspector

The BINDT/PCN and TWI/CSWIP schemes are accredited by UKAS under ISO/IEC 17024. There are many other general schemes, as well as sector specific schemes.

In 2008, the American Petroleum Institute introduced the API 577 Advanced Welding Inspection and Metallurgy programme of certification. Certification is issued following the successful completion of a multiple choice exam which is based on the recommended practice document API 577. Certification identifies the candidate as a 'Welding Inspection and Metallurgy Professional', as opposed to a certified welding inspector under other programmes.[17]

See also

References

  1. ^ a b ASME Boiler and Pressure Vessel Code section IX: "Qualification Standard for welding and brazing procedures, welders, brazers and welding and brazing operators". Article III: Welding Performance Qualifications.
  2. ^ API 1104: "Welding of pipelines and related facilities", part 6
  3. ^ CSA Standard W47.1: Certification of companies for the fusion welding of steel (2009)
  4. ^ CSA Standard W47.2: Certification of companies for the fusion welding of aluminum (2011)
  5. ^ CSA W186: Welding of Reinforcing Bars in Reinforced Concrete Construction (1990)
  6. ^ EN ISO 9606: "Qualification test of welders — Fusion welding (ISO 9606)" four parts
  7. ^ EN 287: "Qualification test of welders — Fusion welding"
  8. ^ BS EN 1418: "Welding personnel. Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials" (1998)
  9. ^ "Certification Scheme for Personnel - Welders". The Welding Institute. Retrieved 2013-07-04.
  10. ^ "Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment", Official Journal L 181, 09/07/1997, Article 13 and Annex I, item 3.1.2
  11. ^ BS EN ISO 14731: "Welding coordination — Tasks and responsibilities" (2006), paragraphs 3.4, B.12, B.13, B.14
  12. ^ AWS QC1: Standard for AWS Certification of Welding Inspectors (2007)
  13. ^ AWS QC15: "Specification for the Certification of Radiographic Interpreters" (2008)
  14. ^ PCN WI: Specific requirements for the certification of personnel for weld inspection, Issue 3.A (2007)
  15. ^ CSWIP-WI-6-92: Requirements for the Certification of Visual Welding Inspectors (Level 1), Welding Inspectors (Level 2) and Senior Welding Inspectors (Level 3) (fusion welding) in accordance with the requirements of BS EN ISO 17637:2011 (2011)
  16. ^ CSA Standard W178.2: Certification of Welding Inspectors(2008)
  17. ^ API 577 – Advanced Welding Inspection & Metallurgy Professional Program - American Petroleum Institute. Retrieved 27 April 2015.
Retrieved from "https://en.wikipedia.org/w/index.php?title=Welder_certification&oldid=743195636"