Jump to content

William Mason (locomotive)

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Cak22 (talk | contribs) at 21:50, 3 December 2011 (→‎References). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

William Mason
Type and origin
Power typeSteam
BuilderMason Locomotive Works
Serial number46
Build dateAugust 1856
Specifications
Configuration:
 • Whyte4-4-0
 • UIC2′B′ nt
Gauge4 ft 8+12 in (1,435 mm)
Driver dia.60 in (1,524 mm)
Adhesive weight40,500 lb (18.4 tonnes)
Loco weight56,000 lb (25.4 tonnes)
Fuel typeWood
Boiler pressure75 lbf/in2 (517 kPa)
CylindersTwo, outside
Cylinder size16 in × 22 in (406 mm × 559 mm)
Valve typeSlide valves
Performance figures
Tractive effort6,225 lbf (27.69 kN)
Career
Official nameWilliam Mason
First runNovember 1856
Retired1892
Current ownerBaltimore and Ohio Railroad Museum
Dispositionrestored to operating condition

"William Mason" is a 4-4-0 steam locomotive currently in operation at the Baltimore and Ohio Railroad Museum in Baltimore, Maryland, USA. It was built for the Baltimore and Ohio Railroad, carrying that railroad's number 25. The locomotive is named in honor of its builder, William Mason, who built around 754 steam locomotives at his Mason Machine Works firm in Taunton, Massachusetts from 1853 until his death in 1883. The engine is one of the oldest operable example of the American Standard design, and the second oldest Baltimore and Ohio locomotive in existence, after the railroad's number 57, "Memnon" 0-8-0 of 1848 (the preserved Tom Thumb, Atlantic, and Lafayette locomotives are replicas of the Baltimore and Ohio's earlier motive power, reproduced by the road for exhibition purposes).

History and career

The engine was built by William Mason for the Baltimore and Ohio in 1856, most likely for passenger service. The engine, while not given a name (the "William Mason" name was most likely added after retirement), was the road's second engine to be numbered 25, replacing an earlier 4-4-0 of that number built by William Norris in 1839. Among the engine's notable features is the "three-point suspension," where unlike most earlier locomotives(i.e. the road's Lafayette), which the front bogie has its wheels closely spaced, the number 25's bogie had its wheels spread apart, with the cylinder mounted horizontally between them. While the engine was not the first to have this design, it represented a major improvement in locomotive design which would come to define the "American Standard" locomotive. Another, similarly revolutionary design was the engine's smokebox. Unlike earlier designs, such as that of the General, built a year earlier, the number 25 had its smokebox sitting on a "saddle" which carried the cylinders. This design further lowered the engine's center of gravity and made re-boilering easier. The number 25 was the road's first engine to have this smokebox design.

Retirement and exhibition

The number 25 served on the Baltimore and Ohio for nearly forty years. The engine is believed to have been one of the engines that pulled the train which carried Abraham Lincoln from Springfield, Illinois to Washington, D.C. for his inauguration in 1861, as well as the train that carried his coffin back to Springfield after his assassination in 1865. [1] It was renumbered to 55 in 1882 and was retired in 1892 when it was placed in storage. Fortunately, the Baltimore and Ohio had greatly favored its locomotives, and preserved its best examples, including number 25. The engine was given the name "William Mason" to honor its builder, and was displayed at the Chicago's World Fair of 1893. After that, the engine had been exhibited on many occasions, including the St. Louis Exposition of 1904, the 1948 Chicago Railroad Fair, as well as the railroad's own Fair of the Iron Horse in 1927. When not being exhibited, it remained in storage until 1953, when it was placed on display in the newly opened Baltimore and Ohio Railroad Museum, where it currently remains.

William Mason in film

Typically, when a locomotive is placed in a museum, it becomes a static exhibit there, often never to operate again. Such was not the case with the William Mason. It had remained operable during the 1950s, when it was used in movies, most notably The Great Locomotive Chase in 1956, and Raintree County a year later. After these performances it returned to the museum, seemingly never to operate again. However, in 1998, the locomotive was restored once more to operating condition for use in the movie, Wild Wild West. After that, it continued to appear in films such as 2002's Tuck Everlasting and 2003's Gods and Generals. In February 2003, the roof of the Baltimore and Ohio Railroad Museum's roundhouse, where the Mason was usually displayed, had collapsed from a major snowstorm. While many engines and rolling stock sustained considerable damage from the collapse, the Mason was not in the roundhouse at the time, having been removed for inspection by the Federal Railroad Administration, and thus evaded damage.

Current Status

In November 2004, after the roundhouse was rebuilt, the museum reopened, with the Mason returning to display in the roundhouse shortly thereafter. Although the William Mason has returned to being displayed in the roundhouse, the museum has the engine operating on select weekends.

References

  1. ^ A picture of the engine with this information is on display at the Abraham Lincoln Library and Museum at Lincoln Memorial University in Harrogate, Tennessee.