Wolseley 6/90

From Wikipedia, the free encyclopedia

This is an old revision of this page, as edited by Malcolma (talk | contribs) at 08:55, 28 October 2016 (surplus category removed). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

Wolseley 6/90
Series III first registered March 1959
Overview
ManufacturerBMC
Production1954–59
11852 made[1]
Body and chassis
ClassMid-size car
Body style4-door saloon
LayoutFR layout
RelatedRiley Two-Point-Six
Powertrain
Engine2.6 L C-Series I6
Dimensions
Wheelbase113.5 in (2,883 mm) [2]
Length188 in (4,775 mm) [2]
Width67.8 in (1,722 mm) [2]
Height62 in (1,575 mm) [2]
Chronology
PredecessorWolseley 6/80
SuccessorWolseley 6/99

The Wolseley 6/90 is a car produced by Wolseley Motors Limited in the United Kingdom from 1954 to 1959. The 6/90 replaced the 6/80 as the company's flagship model. It was badged with Six-Ninety on the bonnet and with 6/90 on the bootlid.

Whereas the 6/80 had shared most of its body panels with the Morris Six, the 6/90 design was similar to the Riley Pathfinder and Riley Two-Point-Six. Morris, Riley and Wolseley had all been owned by the Nuffield Organisation which had merged with Austin to become BMC, and all three marques would soon be heavily involved in BMC's badge engineering; for Wolseley enthusiasts, in retrospect the 6/90 seemed like the last true Wolseley, being visually distinct from contemporary (and cheaper) Austin and Morris offerings. The Pathfinder and 6/90 were still essentially Nuffield designs, although BMC rationalisation meant that the Wolseley received the new BMC C-Series straight-6, an engine that produced 95 hp (71 kW)[2] coupled to a four-speed manual transmission. The 6/90 series II and III did without the Mark I Pathfinder's sophisticated rear suspension.

It rocked Wolseley traditionalists with a grey striped formica instrument panel and central large chrome mesh "cheese-cutter" speaker grille. The hand brake control was under the dash to the side of the steering column and the gearchange was column mounted opposite the dip switch. The leather trimmed front seats were mounted closely together and the rear bench had a fold down centre arm rest.

5776 were made.[1]

The Motor magazine tested a 6/90 in 1955 and found it to have a top speed of 96 mph (154 km/h) and acceleration from 0-60 mph (97 km/h) in 17.3 seconds. A fuel consumption of 21.6 miles per imperial gallon (13.1 L/100 km; 18.0 mpg‑US) was recorded. The test car cost £1063 including taxes.[2]

It is also somewhat notorious for leading to the sacking of its designer Gerald Palmer (by BMC's Leonard Lord) in favour of Alec Issigonis.[citation needed]

Series II

Series II 6/90s, introduced for 1957, included leaf springs on the live axle in the rear, a more conventional walnut dash and a floor-mounted gear lever — unusually on the right-hand side, on right-hand-drive cars. Overdrive and automatic transmissions were available as options.

In production for only 8 months, the Series II gave way to the Series III in 1958 after only 1024 had been made.[1]

Series III

Rear of car registered March 1959

The Series III included larger power brakes and a larger rear window. This design was also available, rebadged, as Riley's Pathfinder replacement, the ill-fated Two-Point-Six. 5052 were made.[1]

6/90 production ended in 1959 with the introduction of the Pininfarina-designed 6/99.

Specifications

  • Engine: 2.6 L (2639 cc) C-Series I6, 95 hp (71 kW)

Die-cast models

A model of the 6/90 was produced by Lansdowne in 2007.

References

  1. ^ a b c d Robson, G. (2006). A-Z of British Cars 1945–1980. Herridge Books. ISBN 0-9541063-9-3.
  2. ^ a b c d e f "The Wolseley 6/90". The Motor. 13 July 1955.