Jump to content

Ścibor-Rylski ŚR-3

From Wikipedia, the free encyclopedia
Ścibor-Rylski ŚR-3
Role Single-seat ultralight
National origin Poland
Designer Adam Ścibor-Rylski
First flight Late August 1939
Number built 1

The Ścibor-Rylski ŚR-3 was a Polish, ultralight, low power, single-seat sports aircraft. First flown in August 1939, only one was completed before World War II.

Design and development

[edit]

Like several other amateur Polish designers in the 1930s, Adam Ścibor-Rylski was interested in simple, low cost machines. As a student at the Warsaw Technical University, he began his studies with the ŚR-1, an attempt to motorize the Wrona basic, open-frame glider. Difficulties in mounting an engine in this structure led to the ŚR-2 which had the Wrona wing married to a new nacelle. By 1937 he had dropped these projects in favour of a more refined, cabin aircraft. This, the ŚR-3, was the subject of his diploma. With the encouragement of LOPP and the Silesian Gliding Workshop (SWS) he received government funding.[1]

The ŚR-3 was a wooden aircraft with a high cantilever wing. The wing was a one piece structure built around a single spar and tapered in plan. It was plywood covered apart from a small fabric covered area aft of the auxiliary spar that carried the ailerons. These were unbalanced and operated differentially.[1]

It was first fitted with a 19 kW (25 hp) Avia 4 flat-four engine which failed during ground trials and was replaced by a 22–24 kW (30–32 hp) Sarolea Albatros flat twin with a fuel tank in the wing. Behind the engine the fuselage was a rectangular section, stressed ply skinned structure, with a rounded roof between the wing trailing edge and the tail where the fuselage narrowed strongly in profile. The ŚR-3's single-seat cockpit was under the wing leading edge and had an upward hinged, one-piece transparent cover.[1]

Its empennage was also ply covered and unbalanced, with the tailplane mounted on top of the fuselage. The fin was almost triangular and carried a full, semi-elliptical rudder which operated between the elevators.[1]

The ŚR-3 had small mainwheels mounted close to the fuselage on short, curved V-struts which had a rubber-in-compression shock absorber within the fuselage.[1]

Zbiniew Żabski flew the ŚR-3 on its first flight at the end of August 1939. Though SWS had hoped to produce the ŚR-3 in both kit and complete forms, the German invasion of Poland a few days after the first flight ended such hopes. The ŚR-3 was reportedly taken by the invaders and flown by the Dortmund Nazi youth organisation.[1]

Specifications

[edit]

Data from J. Cynk (1971)[1] (Dimensions approximate)

General characteristics

  • Crew: One
  • Length: 6.5 m (21 ft 4 in)
  • Wingspan: 8 m (26 ft 3 in)
  • Wing area: 10 m2 (110 sq ft)
  • Empty weight: 160 kg (353 lb)
  • Gross weight: 250 kg (551 lb)
  • Powerplant: 1 × Sarolea Albatros air-cooled flat twin, 22–24 kW (30–32 hp)

Performance

  • Endurance: 2 h

References

[edit]
  1. ^ a b c d e f g Cynk, Jerzy (1971). Polish Aircraft 1893-1939. London: Putnam Publishing. p. 663-4. ISBN 0 370 00085 4.