Frequency standard

These precision 100 kHz oven controlled crystal oscillators at the US Bureau of Standards (now NIST) served as the frequency standard for the United States in 1929.

A frequency standard is a stable oscillator used for frequency calibration or reference. A frequency standard generates a fundamental frequency with a high degree of accuracy and precision. Harmonics of this fundamental frequency are used to provide reference points.

Since time is the reciprocal of frequency, it is relatively easy to derive a time standard from a frequency standard. A standard clock comprises a frequency standard, a device to count off the cycles of the oscillation emitted by the frequency standard, and a means of displaying or outputting the result.

Frequency standards in a network or facility are sometimes administratively designated as primary or secondary. The terms primary and secondary, as used in this context, should not be confused with the respective technical meanings of these words in the discipline of precise time and frequency.

Frequency reference

A frequency reference is an instrument used for providing a stable frequency of some kind. There are different sorts of frequency references, acoustic ones such as tuning forks but also electrical ones that emit a signal of a certain frequency (a frequency standard).

Among the most stable frequency references in the world are cesium standards (including cesium fountains) and hydrogen masers. Cesium standards are widely recognized as having better long-term stability, whereas hydrogen masers can attain superior short-term performance; therefore, several national standards laboratories use ensembles of cesium standards and hydrogen masers in order to combine the best attributes of both.

The carrier of time signal transmitters, Loran-C transmitters and of several long wave and medium wave broadcasting stations is derived from an atomic clock and can be therefore used as frequency standard.

See also

• Rubidium standard
• Atomic clock
• Standard frequency and time signal service

References

 This article incorporates public domain material from Federal Standard 1037C. General Services Administration. Archived from the original on 2022-01-22. (in support of MIL-STD-188).