Real-time locating system
||This article may require cleanup to meet Wikipedia's quality standards. The specific problem is: excessive see also, needs general cleanup. (February 2014)|
||This article's use of external links may not follow Wikipedia's policies or guidelines. (February 2014)|
Real-time locating systems (RTLS) are used to automatically identify and track the location of objects or people in real time, usually within a building or other contained area. Wireless RTLS tags are attached to objects or worn by people, and in most RTLS, fixed reference points receive wireless signals from tags to determine their location. Examples of real-time locating systems include tracking automobiles through an assembly line, locating pallets of merchandise in a warehouse, or finding medical equipment in a hospital.
The physical layer of RTLS technology is usually some form of radio frequency (RF) communication, but some systems use optical (usually infrared) or acoustic (usually ultrasound) technology instead of or in addition to RF. Tags and fixed reference points can be transmitters, receivers, or both, resulting in numerous possible technology combinations.
- 1 Origin
- 2 Locating concepts
- 3 Applications
- 4 Privacy concerns
- 5 Types of technologies used
- 6 Ranging and angulating
- 7 Errors and accuracy in locating systems
- 8 Standards
- 9 Limitations and further discussion
- 10 See also
- 11 References
- 12 External links
The term RTLS was created (circa 1998) at the ID EXPO trade show by Tim Harrington (WhereNet), Jay Werb, (PinPoint), and Bert Moore, (Automatic Identification Manufacturers, Inc.(AIM)). It was created to describe and differentiate an emerging technology that not only provided the automatic identification capabilities of active RFID tags, but also added the ability to view the location on a computer screen. It was at this show that the first examples of a commercial radio based RTLS system were shown by PinPoint and WhereNet. Although this capability had been utilized previously by military and government agencies, the technology had been too expensive for commercial purposes. In the early 1990s, the first commercial RTLS were installed at three healthcare facilities in the United States, and were based on the transmission and decoding of infrared light signals from actively transmitting tags. Since then, new technology has emerged that also enables RTLS to be applied to passive tag applications.
RTLS are generally used in indoor and/or confined areas, such as buildings, and do not provide global coverage like GPS. RTLS tags are affixed to mobile items to be tracked or managed. RTLS reference points, which can be either transmitters or receivers, are spaced throughout a building (or similar area of interest) to provide the desired tag coverage. In most cases, the more RTLS reference points that are installed, the better the location accuracy, until the technology limitations are reached.
A number of disparate system designs are all referred to as "real-time locating systems", but there are two primary system design elements:
Locating at choke points
The simplest form of choke point locating is where short range ID signals from a moving tag are received by a single fixed reader in a sensory network, thus indicating the location coincidence of reader and tag. Alternately, a choke point identifier can be received by the moving tag, and then relayed, usually via a second wireless channel, to a location processor. Accuracy is usually defined by the sphere spanned with the reach of the choke point transmitter or receiver. The use of directional antennas, or technologies such as infrared or ultrasound that are blocked by room partitions, can support choke points of various geometries.
Locating in relative coordinates
ID signals from a tag is received by a multiplicity of readers in a sensory network, and a position is estimated using one or more locating algorithms, such as trilateration, multilateration, or triangulation. Equivalently, ID signals from several RTLS reference points can be received by a tag, and relayed back to a location processor. Localization with multiple reference points requires that distances between reference points in the sensory network be known in order to precisely locate a tag, and the determination of distances is called ranging.
Another way to calculate relative location is if mobile tags communicate directly with each other, then relay this information to a location processor.
RF trilateration uses estimated ranges from multiple receivers to estimate the location of a tag. RF triangulation uses the angles at which the RF signals arrive at multiple receivers to estimate the location of a tag. Many obstructions, such as walls or furniture, can distort the estimated range and angle readings leading to varied qualities of location estimate. Estimation-based locating is often measured in accuracy for a given distance, such as 90% accurate for 10 meter range.
Systems that use locating technologies that do not go through walls, such as infrared or ultrasound, tend to be more accurate in an indoor environment because only tags and receivers that have line of sight (or near line of sight) can communicate.
RTLS can be used numerous logistical or operational areas such as:
- locating assets within a facility, such as finding a misplaced tool cart in a warehouse
- notification of new locations, such as an alert if a tool cart improperly has left the facility
- to combine identity of multiple items placed in a single location, such as on a pallet
- to locate customers, for example in a restaurant, for delivery of food or service.
- to maintain proper staffing levels of operational areas, such as ensuring guards are in the proper locations in a correctional facility
- to quickly and automatically account for all staff after or during an emergency evacuation
- to automatically track and time stamp the progress of people or assets through a process, such as following a patient's emergency room wait time, time spent in the operating room, and total time until discharge. Such a system can be used for process improvement.
- clinical-grade locating to support acute care capacity management.
RTLS may be seen as a threat to privacy when used to determine the location of people. The newly declared human right of informational self-determination de:Informationelle Selbstbestimmung gives the right to prevent one's identity and personal data from being disclosed to others, and also covers disclosure of locality, though this does not generally apply to the workplace.
Several prominent labor unions have come out against the use of RTLS systems to track workers calling them "the beginning of Big Brother" and "an invasion of privacy". However, this loss of privacy may be outweighed by other benefits to staff. For example, Toronto General Hospital is looking at RTLS to reduce quarantine times after an infectious disease outbreak. After a recent SARS outbreak, 1% of all staff were quarantined, and more accurate data regarding who had been exposed to the virus could have reduced the need for quarantines.
Types of technologies used
There is a wide variety of systems concepts and designs to provide real-time locating.
- Active radio frequency identification (Active RFID)
- Active radio frequency identification - infrared hybrid (Active RFID-IR)
- Infrared (IR)
- Optical locating
- Low-frequency signpost identification
- Semi-active radio frequency identification (semi-active RFID)
- Passive RFID RTLS locating via Steerable Phased Array Antennae
- Radio beacon,
- Ultrasound Identification (US-ID)
- Ultrasonic ranging (US-RTLS)
- Ultra-wideband (UWB)
- Wide-over-narrow band
- Wireless Local Area Network (WLAN, Wi-Fi)
- Clustering in noisy ambience,
- Bivalent systems
A general model for selection of the best solution for a locating problem has been constructed at the Radboud University of Nijmegen. Many of these references do not comply with the definitions given in international standardization with ISO/IEC 19762-5 and ISO/IEC 24730-1. However, some aspects of real-time performance are served and aspects of locating are addressed in context of absolute coordinates.
Ranging and angulating
Depending on the physical technology used, at least one and often some combination of ranging and/or angulating methods are used to determine location:
- Angle of arrival (AoA)
- Line-of-sight (LoS)
- Time of arrival (ToA)
- Multilateration (Time difference of arrival) (TDoA)
- Time-of-flight (ToF)
- Two-way ranging (TWR) according to Nanotron’s patents
- Symmetrical Double Sided – Two Way Ranging (SDS-TWR)
- Near-field electromagnetic ranging (NFER)
Errors and accuracy in locating systems
Real-time locating is affected by a variety of errors. Many of the major reasons relate to the physics of the locating system, and may not be reduced by improving the technical equipment.
- None or no direct response
Many RTLS systems require direct and clear line of sight visibility. For those systems, where there is no visibility from mobile tags to fixed nodes there will be no result or a non valid result from locating engine. This applies to satellite locating as well as other RTLS systems such as angle of arrival and time of arrival. Fingerprinting is a way to overcome the visibility issue: If the locations in the tracking area contain distinct measurement fingerprints, line of sight is not necessarily needed. For example, if each location contains a unique combination of signal strength readings from transmitters, the location system will function properly. This is true, for example, with some Wi-Fi based RTLS solutions. However, having distinct signal strength fingerprints in each location typically requires a fairly high saturation of transmitters.
- False location
The measured location may appear entirely faulty. This is a generally result of simple operational models to compensate for the plurality of error sources. It proves impossible to serve proper location after ignoring the errors.
- Locating backlog
Real time is no registered branding and has no inherent quality. A variety of offers sails under this term. As motion causes location changes, inevitably the latency time to compute a new location may be dominant with regard to motion. Either an RTLS system that requires waiting for new results is not worth the money or the operational concept that asks for faster location updates does not comply with the chosen systems approach.
- Temporary location error
Location will never be reported exactly, as the term real-time and the term precision directly contradict in aspects of measurement theory as well as the term precision and the term cost contradict in aspects of economy. That is no exclusion of precision, but the limitations with higher speed are inevitable.
- Steady location error
Recognizing a reported location steadily apart from physical presence generally indicates the problem of insufficient over-determination and missing of visibility along at least one link from resident anchors to mobile transponders. Such effect is caused also by insufficient concepts to compensate for calibration needs.
- Location jitter
Noise from various sources has an erratic influence on stability of results. The aim to provide a steady appearance increases the latency contradicting to real time requirements.
- Location jump
As objects containing mass have limitations to jump, such effects are mostly beyond physical reality. Jumps of reported location not visible with the object itself generally indicate improper modeling with the location engine. Such effect is caused by changing dominance of various secondary responses.
- Location creep
Location of residing objects gets reported moving, as soon as the measures taken are biased by secondary path reflections with increasing weight over time. Such effect is caused by simple averaging and the effect indicates insufficient discrimination of first echoes.
The basic issues of RTLS are standardized by the International Organization for Standardization and the International Electrotechnical Commission, under the ISO/IEC 24730 series. In this series of standards, the basic standard ISO/IEC 24730-1 identifies the terms describing a form of RTLS used by a set of vendors, but does not encompass the full scope of RTLS technology.
Currently several standards are published or under discussion:
- ISO/IEC FDIS 19762-5 Information technology AIDC techniques — Harmonized vocabulary, Part 5 — Locating systems
- ISO/IEC 24730-1:2006 Information technology real-time locating systems (RTLS) Part 1: Application program interface (published).
- ISO/IEC 24730-2:2006 Information technology real-time locating systems (RTLS) Part 2: 2,4 GHz Air interface protocol (published, WhereNet/Zebra approach).
- ISO/IEC WD 24730-5 Information technology real-time locating systems (RTLS) Part 5: (drafted ISO/IEC standard out for balloting in 2008, Nanotron approach).
The other proposals ISO/IEC 24730-3 and ISO/IEC 24730-4 had never left the stage of intention. For copies of these documents see references.
These standards do not stipulate any special method of computing locations, nor the method of measuring locations. This may be defined in specifications for trilateration, triangulation or any hybrid approaches to trigonometric computing for planar or spherical models of a terrestrial area.
- ANS/INCITS 371: Information Technology – Real-Time Locating Systems (RTLS).
Limitations and further discussion
In RTLS application in the Healthcare industry, various studies were issued discussing the limitations of the currently adopted RTLS. Currently used technologies RFID, Wi-fi, UWB, all RFID based are hazardous in the sense of interference with sensitive equipment. A study carried out by Dr Erik Jan van Lieshout of the Academic Medical Centre of the University of Amsterdam published in ‘JAMA’ (Journal of the American Medical Equipment) claimed “RFID and UWB could shut down equipment patients rely on” as “RFID caused interference in 34 of the 123 tests they performed". The first Bluetooth RTLS provider in the medical industry is supporting this in their article: "The fact that RFID cannot be used near sensitive equipment should in itself be a red flag to the medical industry". The RFID Journal responded to this study not negating it rather explaining real-case solution: "The Purdue study showed no effect when ultrahigh-frequency (UHF) systems were kept at a reasonable distance from medical equipment. So placing readers in utility rooms, near elevators and above doors between hospital wings or departments to track assets is not a problem".  However the case of 'keeping at a reasonable distance' might be still an open question for the RTLS technology adopters and providers in medical facilities.
- Indoor positioning system
- Track and trace
- Positioning technologies
- Context awareness
- Location awareness
- Real-time locating standards
- Other related international standards
- IEEE 802.15.4 (Low-Rate Wireless-Personal-Area-Network)
- ISO/IEC 19762-5
- Malik, Ajay (2009). RTLS For Dummies. Wiley. p. 336. ISBN 978-0-470-39868-5.
- Laserscannersteuerung für FTF HG 43600
- Auswerter zur optischen Spurführung
- RFID Technology from Texas Instruments and RF Code Helps Kids Play it Safe
- RFID Technology from Texas Instruments and RF Code Brings Service and Safety to Guests
- UWB RTLS Vendor Improves Sensitivity, Lowers Cost
- Essensium LOST system for RTLS combining benefits of UWB and Narrowband
- Enhancing Accuracy Performance of Bluetooth Positioning
- "Real-Time Location Systems". clarinox. Retrieved 2010-08-04.
- Collaborative Localization
- WLAN location determination via clustering and probability distributions
- services for elderly and disabled people
- "Positioning techniques : A general model". Radboud University of Nijmegen.
- Information technology – Automatic identification and data capture (AIDC) techniques – Harmonized vocabulary – Part 5: Locating systems
- Information technology – Real-time locating systems (RTLS) – Part 1: Application program interface (API)
- International Standardization in Engineering
- International Standardization in Industry and Science
- Search Page for ISO standards concerning RTLS
- A real-time location search primer
- International Standardization in Electrical Engineering
- International Standardization in Communications
- International Lobbying in Automatic Identification
- US American Lobbying in Automatic Identification
- Statement of International Lobbying on Real-Time Locating
- ISO JTC1 (TC122) SC31 WG5 Homepage on RTLS
- ISO JTC1 (TC122) SC31 WG5 Homepage on MIIM
- Company driving international standardization on e.g. RFID and RTLS in US
- Schedule and actual scope of RTLS standardization in ISO JTC1, TC122 and SC31
- Car-to_Car communications programme funding of the European Union
- RT Non-Line-of-Sight Localization System by CMR@UNSW