ZK-383
| ZK-383 | |
|---|---|
| Type | Submachine gun |
| Place of origin |  Czechoslovakia |
| Service history | |
| In service | 1938-1970 |
| Used by | See Users |
| Wars | World War II |
| Production history | |
| Designer | Koucký brothers [1] |
| Designed | 1930 [1] |
| Produced | 1938–1966 |
| No. built | Approx 20,000 [1] |
| Specifications (ZK-383) | |
| Mass | 4.25 kg |
| Length | 875 mm |
| Barrel length | 325 mm |
| Cartridge | 9×19mm Parabellum |
| Action | blowback |
| Rate of fire | 500–700 rounds/min, variable [2] |
| Muzzle velocity | 1500 f/s |
| Maximum firing range | 250 m |
| Feed system | 30, 40 round detachable box magazine |
The ZK-383 is a submachine gun developed by the Koucký brothers, who worked at the pre-war Československá zbrojovka, akc.spol. (under its name of Zbrojovka Brno after World War II) arms factory in Brno, Czechoslovakia. It was produced at a slow rate from 1938 onwards and was exported as far away as Bolivia and Venezuela.[1]
History
The ZK-383 was exported to many smaller European countries following its production start date in 1938. The production of the ZK-383 continued at Brno arms factory even during the German occupation during World War II. Most of the guns produced were supplied to the Waffen-SS. It continued to be produced in small numbers in the postwar period; Bulgaria continued importing it right up until 1970, 4 years after production finished. The ZK-383 was slowly phased out by smaller and lighter submachine guns such as the Škorpion vz. 61 and Sa vz. 23.[1]
Design
The ZK-383 was originally designed to be a squad automatic weapon much like the British Bren and Soviet DP28, despite it shooting a pistol round and not a full sized rifle cartridge. It became an individual submachine gun which resembles the German MP 18. For a submachine gun, the ZK-383 was a heavy and robustly made weapon. Military versions possessed detachable barrels, an integrated bipod, and rifle type sights, components considered unusual in submachineguns of the era.[2] The police variant, designated the ZK-383-P, lacked these features, as did the postwar ZK-383-H.
Features
The ZK-383 was fitted with a quickly detachable barrel. The lock/release mechanism was located beneath the front sight. It fires from an open bolt and by removing the bolt weight, the shooter could change the cyclic rate from 500 to 700 rpm. The magazine fed in from the left hand side like the British Sten. The manual safety was located in front of the trigger on the left side of the weapon. The ZK-383 had two firing modes, single and full auto. Selection was made via the use of a short or long trigger pull. The stock was made from wood and had a folding bipod. The guns featured a front peep sight and a rear adjustable leaf iron sight.
Variants
- ZK-383; Standard production model
- ZK-383-P; Police version, lacking a folding bipod and detachable barrel
- ZK-383-H; Post-war production version which also lacked a bipod and detachable barrel; instead of a left side magazine, this model had a forward-facing underslung magazine
