Rope access

Rope access is a form of work positioning, initially developed from techniques used in climbing and caving, which applies practical ropework to allow workers to access difficult-to-reach locations without the use of scaffolding,cradles or mobile elevated work platforms MEWPs. Many companies worldwide can supply workers such as inspectors, window cleaners ,welders, painters and cleaners who are trained in these techniques.

The industry is characterised by rigorous adherence to the following safety characteristics developed and controlled by IRATA Interantional www.irata.org:

• When working a rope access technician always has at least 2 attachments, each having an independent anchorage point.
• When the worker is supported by ropes, each of the worker's ropes will have a fail-safe descent mechanism.
• All secondary tools and equipment (e.g. drills, sealant, etc.) are attached by lanyards to worker's harness to avoid danger to people below.
• A minimum of two trained technicians are required for any job, each with the ability to rescue the other if needed.
• All technicians are independently assessed.
• All equipment is regularly inspected and maintained.
• Carefully refined codes of practice and working systems are used.

This approach has meant very few accidents since the beginning of this activity around 1980s.

Typical Applications

Typical applications include:

• Inspection, painting and light construction on offshore oil platforms
• Window cleaning on high-rise buildings
• Rock stabilisation on cliff faces above roadways
• Maintenance on aerials and electrical transmission towers (pylons)

External links

• Ataltus - Overview of equipment used in Rope Access
• IRATA - Industrial Rope Access Trade Association
• Rope Access Photos - Spectacular Rope Access photos
• Rigg-Access - Useful source for information on Rope Access, employment, and career advice.
• Rigg-Access Photo Album - Large collection of Rope Access photographs