Jump to content

UNIVAC: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
m rv v Undid revision 482399745 by Okped (talk)
Thom2729 (talk | contribs)
Line 98: Line 98:


==External links==
==External links==
*[http://www.cbi.umn.edu/oh/display.phtml?id=125 UNIVAC Conference Oral history on 17-18 May 1990.] [[Charles Babbage Institute]] University of Minnesota, Minneapolis. 171-page transcript of oral history with computer pioneers involved with the Univac computer, held on 17–18 May 1990. The meeting involved 25 engineers, programmers, marketing representatives, and salesmen who were involved with the UNIVAC, as well as representatives from users such as General Electric, Arthur Andersen, and the U.S. Census.
*[http://purl.umn.edu/104288 UNIVAC Conference Oral history on 17-18 May 1990.] [[Charles Babbage Institute]] University of Minnesota, Minneapolis. 171-page transcript of oral history with computer pioneers involved with the Univac computer, held on 17–18 May 1990. The meeting involved 25 engineers, programmers, marketing representatives, and salesmen who were involved with the UNIVAC, as well as representatives from users such as General Electric, Arthur Andersen, and the U.S. Census.
*[http://www.cbi.umn.edu/oh/display.phtml?id=160 Oral history interview with Isaac Levin Auerbach] Oral history interview by Nancy B. Stern, 10 April 1978. [[Charles Babbage Institute]], University of Minnesota, Minneapolis. Auerbach recounts his experiences at [[Electronic Control Company]] (later the [[Eckert-Mauchly Computer Company]]) during 1947-1949. He discusses the [[BINAC]] computer project for [[Northrop Corporation|Northrop Aircraft]], the UNIVAC, as well as the roles of the [[National Bureau of Standards]], [[Northrop Corporation|Northrop Aircraft]], [[Raytheon]], [[Remington Rand]], and [[IBM]].
*[http://purl.umn.edu/59495 Oral history interview with Isaac Levin Auerbach] Oral history interview by Nancy B. Stern, 10 April 1978. [[Charles Babbage Institute]], University of Minnesota, Minneapolis. Auerbach recounts his experiences at [[Electronic Control Company]] (later the [[Eckert-Mauchly Computer Company]]) during 1947-1949. He discusses the [[BINAC]] computer project for [[Northrop Corporation|Northrop Aircraft]], the UNIVAC, as well as the roles of the [[National Bureau of Standards]], [[Northrop Corporation|Northrop Aircraft]], [[Raytheon]], [[Remington Rand]], and [[IBM]].
*[http://www.fourmilab.ch/documents/univac/ UNIVAC Memories];
*[http://www.fourmilab.ch/documents/univac/ UNIVAC Memories];
*[http://www.cc.gatech.edu/services/unisys-folklore/ Unisys History Newsletter].
*[http://www.cc.gatech.edu/services/unisys-folklore/ Unisys History Newsletter].

Revision as of 18:15, 30 March 2012

UNIVAC is the name of a business unit and division of the Remington Rand company formed by the 1950 purchase of the Eckert-Mauchly Computer Corporation, founded four years earlier by ENIAC inventors J. Presper Eckert and John Mauchly, and the associated line of computers which continues to this day in one of the two such lines offered by Unisys. Unisys was formed when Burroughs (whose line of computers form the other Unisys mainframe legacy line) bought Sperry which held the evolved UNIVAC division. UNIVAC is an acronym for UNIVersal Automatic Computer.

Univac history and structure

UNIVAC Sperry Rand label

Eckert and Mauchly built the ENIAC (Electronic Numerical Integrator and Computer) at the University of Pennsylvania's Moore School of Electrical Engineering between 1943 and 1946. A 1946 patent rights dispute with the university led Eckert and Mauchly to depart the Moore School to form the Electronic Control Company, later renamed Eckert-Mauchly Computer Corporation (EMCC), based in Philadelphia, Pennsylvania. That company first built a computer called BINAC (BINary Automatic Computer) for Northrop Aviation (which was little used, or perhaps not at all). Afterwards began the development of UNIVAC. UNIVAC was first intended for the Bureau of the Census, which paid for much of the development, and then was put in production.

With the death of EMCC's chairman and chief financial backer Harry L. Straus in a plane crash on October 25, 1949, EMCC was sold to typewriter maker Remington Rand on February 15, 1950. Eckert and Mauchly now reported to Leslie Groves, the retired army general who had managed the Manhattan Project. Remington Rand had its own calculating machine lab in Norwalk, Connecticut, and later bought Engineering Research Associates (ERA) in St. Paul, Minnesota. In 1953 or 1954 Remington Rand merged their Norwalk tabulating machine division, the ERA "scientific" computer division, and the UNIVAC "business" computer division into a single division under the UNIVAC name. This severely annoyed those who had been with ERA and with the Norwalk laboratory.

The most famous UNIVAC product was the UNIVAC I mainframe computer of 1951, which became known for predicting the outcome of the U.S. presidential election the following year. This incident is particularly infamous because the computer predicted an Eisenhower landslide when traditional pollsters all called it for Adlai Stevenson.[1] The numbers were so skewed that CBS's news boss in New York, Mickelson, decided the computer was in error and refused to allow the prediction to be read. Instead they showed some staged theatrics that suggested the computer was not responsive, and announced it was predicting 8-7 odds for an Eisenhower win (the actual prediction was 100-1). When the predictions proved true and Eisenhower won a landslide within 1% of the initial prediction, Charles Collingwood, the on-air announcer, embarrassingly announced that they had covered up the earlier prediction.[2]

In 1955 Remington Rand merged with Sperry Corporation to become Sperry Rand. The UNIVAC division of Remington Rand was renamed the Univac division of Sperry Rand. General Douglas MacArthur was chosen to head the company. In the 1960s, UNIVAC was one of the eight major American computer companies in an industry then referred to as "IBM and the seven dwarfs" — a play on Snow White and the seven dwarfs, with IBM, by far the largest, being cast as Snow White and the other seven as being dwarfs: Burroughs, Univac, NCR, CDC, GE, RCA and Honeywell.[3] In the 1970s, after GE sold its computer business to Honeywell and RCA sold its to Univac, the analogy to the seven dwarfs became less apt and the remaining small firms became known as the "BUNCH" (Burroughs, Univac, NCR, Control Data, and Honeywell).

Around 1975, to assist "corporate identity" the name was changed to Sperry Univac, along with Sperry Remington, Sperry New Holland, etc. In 1978 Sperry Rand, an old fashioned conglomerate of disharmonious divisions (computers, typewriters, office furniture, hay balers, manure spreaders, gyroscopes, avionics, radar, electric razors), decided to concentrate on its computing interests and unrelated divisions were sold. The company dropped the Rand from its title and reverted back to Sperry Corporation. In 1986, Sperry Corporation merged with Burroughs Corporation to become Unisys.

Since the 1986 marriage of Burroughs and Sperry, Unisys has metamorphosed from a computer manufacturer to a computer services and outsourcing firm, competing in the same marketplace as IBM, Electronic Data Systems (EDS), and Computer Sciences Corporation. Unisys continues to design and manufacture enterprise class computers with the ClearPath and ES7000 server lines.

Models

UNIVAC I
UNIVAC 1103
UNIVAC 1232
UNIVAC 1100/80
UNIVAC 1108

In the course of its history, UNIVAC produced a number of separate model ranges.

The original model range was the UNIVAC I (UNIVersal Automatic Computer I), the first commercial computer made in the United States. The main memory consisted of tanks of liquid mercury implementing delay line memory, arranged in 1000 words of 12 alphanumeric characters each. The first machine was delivered on 31 March 1951. Successor machines included:

The UNIVAC II was an improvement to the UNIVAC I that UNIVAC first delivered in 1958. The improvements included magnetic (non-mercury) core memory of 2000 to 10000 words, UNISERVO II tape drives which could use either the old UNIVAC I metal tapes or the new PET film tapes, and some circuits that were transistorized (although it was still a vacuum tube computer). It was fully compatible with existing UNIVAC I programs for both code and data. The UNIVAC II also added some instructions to the UNIVAC I's instruction set.

Sperry Rand began shipment of UNIVAC III in 1962, and produced 96 UNIVAC III systems. Unlike the UNIVAC I and UNIVAC II, however, it was a binary machine as well as maintaining support for all UNIVAC I and UNIVAC II decimal and alphanumeric data formats for backward compatibility. This was the last of the original UNIVAC machines.

The UNIVAC Solid State was a 2-address, bi-quinary coded decimal computer, with memory on a rotating drum with 5000 signed 10 digit words. For efficiency, programmers had to take into account drum latency, the time required for a specific data item, once written, to rotate to where it could be read. It was one of the first computers to use some solid-state components. It came in two versions: the Solid State 80 (IBM-Hollerith 80 column cards) and the Solid State 90 (Remington-Rand 90 column cards). This machine was designated the Solid State 80-90 and sold mostly in Europe. UNIVAC SS80/90s were installed at DC Transit, SBA, CWA, in Washington DC during the early sixties. It was a follow on to a computer built for the USAF and delivered to Lawrence G. Hanscom Field, near Cambridge, MA in 1957. This computer used magnetic amplifiers, not transistors. The decision to use magnetic amplifiers was made because the point-contact germanium transistors then available had highly variable characteristics and were not sufficiently reliable. The magnetic amplifiers were based on tiny (about 1/8" ID) toroidal stainless steel spools wound with two or so layers of 1/32" wide 4-79 moly-permalloy magnetic material to form magnetic cores. These cores had two windings of #60 copper wire surrounding the 4-79 molypermalloy. The magnetic amplifiers required clock pulses of heavy current that could not be produced by the transistors of the day. A transmitting vacuum-tube, of the type used in amateur radio final amplifiers, produced a powerful high-voltage signal which was stepped down to a 36-volt, high-current clock by oil-filled transformers that were distributed about the machine. Thus the SS 80/90, for the heart of its operation, depended on the very technology it claimed to replace, a marketing tactic. The clock tube was enclosed in a shielding box that constrained both radio emissions and viewing by eyes of other than Univac's field engineers. The SS80/90 was aimed at the general purpose business market.

Early UNIVAC 1100 series models were vacuum tube computers.

The UNIVAC 1100/2200 series is a series of compatible 36-bit transistorized computer systems initially made by Sperry Rand. The series continues to be supported today by Unisys Corporation as the ClearPath Plus Dorado Series.[4]

  • Remington Rand 409 was a control panel programmed punched card calculator, designed in 1949.
  • The UNIVAC 418 (aka 1219) was an 18-bit word core memory machine. Over the three different models, more than 392 systems were manufactured.
  • The UNIVAC 490 was a 30-bit word core memory machine with 16K or 32K words; 4.8 microsecond cycle time.
  • The UNIVAC 492 is similar to the UNIVAC 490, but with extended memory to 64K 30-bit words.
  • The UNIVAC 494 was a 30-bit word machine and successor to the UNIVAC 490/492 with faster CPU and 131K (later 262K) core memory. Up to 24 I/O channels were available and the system was usually shipped with UNIVAC FH880 or UNIVAC FH432 or FH1782 magnetic drum storage. Basic operating system was OMEGA (successor to REX for the 490) although custom operating systems were also used (e.g. CONTORTS for airline reservations).
  • The UNIVAC 1004 was a plug-board programmed punched card data processing system, introduced in 1962, by UNIVAC. Total memory was 961 characters (6 bits) of core memory. Peripherals were a card reader (400 cards/minute), a card punch (200 cards/minute) using proprietary 90-column, round-hole cards or IBM-compatible, 80-column cards, a drum printer (400 lines/minute) and a Uniservo tape drive. The 1004 was also supported as a remote card reader & printer via synchronous communication services. A U.S. Navy (Weapons Station, Concord) 1004 was dedicated to printing from tape as a means of offloading the task from their Solid State 80 mainframe, which produced the tapes. A plug-board program called Emulator was widely installed to convert 1004s to stored-program operation, reading in instructions from program decks of cards which determined the processing of the following data decks. Once installed, Emulator was rarely removed as it could run the machine as desired and, as almost every machine function was used, it was physically heavy from the sheer mass of installed jumpers filling nearly the entire board. Emulator was not a Univac product, rather it was built by each customer, a tedious task. Its heavy use of the 1004's program-branching reed relays, called selectors, caused increased failures, later solved by the use of electronic selectors in the follow-on 1005.
  • The UNIVAC 1005, an enhanced version of the UNIVAC 1004, was introduced in February 1966. The main improvement over the 1004 was conversion from the plug-board program to an internal stored program. The machine saw extensive use by the US Army, including the first use of an electronic computer on the battlefield. Additional peripherals were also available including a paper tape reader and a three pocket stacker selectable card read/punch. The machine had a two-stage assembler (SAAL - Single Address Assembly Language) which was its primary assembler; it also had a three stage card based compiler for a programming language called SARGE. 1005s were used as some nodes on Autodin.
  • The UNIVAC 1050 was an internally programmed computer with up to 32K of 6-bit character memory, which was introduced in 1963. It was a 1-address machine with 30-bit instructions, had a 4K operating system and was programmed in the PAL assembly language. The 1050 was used extensively by the U.S. Air Force supply system for inventory control.
  • The UNIVAC 9000 series (9200, 9300, 9400, 9700) was introduced in the mid-1960s to compete with the low end of the IBM 360 series. The 9000 series implemented the IBM 360 instruction set. The 9200 and 9300 (which differed only in CPU speed) implemented the same restricted 360 subset as the IBM 360/20, while the UNIVAC 9400 implemented the full 360 instruction set. The 9400 was roughly equivalent to the IBM 360/30. The 9000 series used plated wire memory, which functioned somewhat like core memory but used a non-destructive read. Since the 9000 series was intended as direct competitors to IBM, they used 80-column cards and EBCDIC character encoding.
  • The UNIVAC 90/60 Series (90/60, 90/70, 90/80): Later, more advanced machines such as the Univac 90/60 provided systems which featured virtual memory and thus were similar, or equivalent, to later IBM 370 mainframes. This didn't violate IBM copyrights. Sperry got the rights to "clone" the 360 as settlement of a lawsuit concerning IBM's infringement of Remington Rand's core memory patents.
  • The UNIVAC 90/30 Series (90/30, 90/25, 90/40): Separately from the 90/60 series, Sperry Univac introduced the Univac 90/30 in about 1975 to provide an upgrade path for 9x00 users and to compete with IBM's System 3. It used a disk operating system and had either a 500 or 2000 lines per minute printer, a card reader, optionally a card punch, a console (Uniscope 100), attached disk drives that had removable disk packs, several 1600 or 6250 BpI tape drives, and possibly a communications controller. The standard disk drive was the 8416 which held a multi-layer platter removable disk pack that held approximately 40 million bytes. The 8418 drive was an enhanced version that supported both 40MB and "double-density" 80MB disk packs. There was also an 8430 drive. The machine had either 1K, 4K or 16K memory chips, and typical machines had between 128 to 512 KiB memory. It ran an OS called OS/3, and could run up to 7 jobs at one time, not counting various OS extensions such as the spooler and telecommunications access (ICAM). It was an upgrade path for folks who had outgrown the IBM System/3. It ran Cobol-74, RPG2, Fortran, and Assembler.

Shortly after the 90/30 was introduced, Sperry Univac introduced the 90/25 which was the same basic hardware, however had an option for a smaller 80 column card reader and was a bit slower (it is said, that the machine executed 3 instructions and then paused to slow it down, as nearly every component was identical to the 90/30). Later a 90/40 model was added which improved upon various performance criteria such as clock rate and maximum main memory capacity.

The Sperry UNIVAC System 80 series: The entire 90/xx series was eventually replaced in 1981 by the System 80, a Sperry-badged, IBM/360-like mainframe actually developed and engineered by Mitsubishi in Japan.

Operating systems

The 1107 was the first 36-bit, word-oriented machine with an architecture close to that which came to be known as that of the "1100 Series." It ran the EXEC II operating system, a batch-oriented second-generation operating system, typical of the early to mid-1960s. The 1108 ran EXEC II and EXEC 8. EXEC 8 allowed simultaneous handling of real-time applications, time-sharing, and background batch work. TIP, a transaction-processing environment, allowed programs to be written in COBOL whereas similar programs on competing systems were written in assembly language. On later systems, EXEC 8 was renamed OS 1100 and OS 2200, with modern descendants maintaining backwards compatibility. Some more exotic operating systems ran on the 1108—one of which was RTOS, a more bare-bones system designed to take better advantage of the hardware.

The affordable System 80 series of small mainframes ran the OS/3 operating system which originated on the Univac 90/30 (and later 90/25, and 90/40).

The UNIVAC 90/60 Series first ran with Univac developed OS/9, which was later replaced by RCA's Virtual Memory Operating System (VMOS). RCA originally called this operating system Time Sharing Operating System (TSOS), running on RCA's Spectra 70 line of virtual memory systems and changed its name to VMOS before the Sperry acquisition of RCA CSD. After VMOS was ported to the 90/60, Univac renamed it VS/9.

Trademark

UNIVAC has been, over the years, a registered trademark of:

See also

References

  1. ^ Brinkley, Alan. American History: A Survey. 12 ed.
  2. ^ Randy Alfred, "Nov. 4, 1952: Univac Gets Election Right, But CBS Balks", This Day in Tech , Wired
  3. ^ Dvorak, John C. (2006-11-25). "IBM and the Seven Dwarfs — Dwarf One: Burroughs". Dvorak Uncensored. Retrieved 2010-07-20.
  4. ^ Unisys.com
  • David E. Lundstrom: A Few Good Men from Univac, ISBN 0-7351-0010-1
  • Nancy Beth Stern, From Eniac to UNIVAC: An Appraisal of the Eckert-Mauchly Computers, ISBN 0-932376-14-2
  • Arthur L. Norberg, Computers and Commerce: A Study of Technology and Management at Eckert-Mauchly Computer Company, Engineering Research Associates, and Remington Rand, 1946-1957 (History of Computing) (Hardcover), ISBN 0-262-14090-X
  • James W. Cortada, Before the Computer: IBM, NCR, Burroughs, and Remington Rand and the Industry They Created, 1865-1956 (Studies in Business and Technology), ISBN 0-691-05045-7