Jump to content

Exception handling: Difference between revisions

From Wikipedia, the free encyclopedia
Browse history interactively
← Previous editNext edit →
Content deleted Content added
VisualWikitext
Line 7: Line 7:




==Goals of exceptions==
Exception handling is intended to facilitate use of reasonable mechanisms for handling erroneous or exceptional situations that arise in programs. Exception handling can be used to pass information about error situations that occur within library code to its users, and selectively respond to those errors. Exceptions help the programmer avoid the [[semipredicate problem]] by freeing the return value of a function from the need to encode errors.


A possible role of exception handling is to allow the program to continue its normal operation and prevent [[Crash (computing)|crashing]] and displaying of cryptic error messages to the user. In many cases, it is sufficient to stop the program and produce an error report; the difference with systems that do not use exceptions to signal improper program executions is that with proper exception handling, the erroneous condition may be pointed precisely, whereas otherwise it is often detected later, making [[debugging]] difficult.

===Exceptions vs. Return Value===
An alternate form of (software) error handling is to use the return value of a function to indicate that an error has
occurred (this is similar in that "Return" is a unstructured construct: you can return from any point in the code,
without processing the remainder). The main problems with return value error handling are:
* Intermediate functions must check for error conditions, and pass it up if they cannot deal with it. This is:
** fragile, as an error that is not checked for by an intermediate function is silently dropped
** verbose, as every function call must be checked and handled individually
* The [[semipredicate problem]], namely that some (potentially valid) values are instead used as errors

===Contrasting Structures===
Exceptions are a form of [[Unstructured programming]];
they are milder than [[Continuation|continuations]], but stronger than return.

In a return, the function exits with a given value, but you exit no further.
In an exception, you repeatedly exit functions and blocks until caught: an exception is "keep returning".

====Exceptions as a special case of continuations====
You can think of every "Try" saving a continuation (namely, the catch block and all that follows),
and "Throw" calling the continuation. Exceptions are not general continuations, as for instance instead of
having general variables of type "continuation", you simply have a stack, with only the latest continuation accessible.


==Exception safety==
==Exception safety==

Revision as of 10:03, 17 June 2006

Exception handling is a programming language construct or computer hardware mechanism designed to handle the occurrence of some condition that changes the normal flow of execution. The condition is called an exception. Alternative concepts are signal and event handler.

In general, current state will be saved in a predefined location and execution will switch to a predefined handler. Depending on the situation, the handler may later resume the execution at the original location, using the saved information to restore the original state. For example, an exception which will usually be resumed is a page fault, while a division by zero usually cannot be resolved transparently.

From the processing point of view, hardware interrupts are similar to resumable exceptions, except they are usually not related to the current program flow.



Exception safety

A piece of code is said to be exception-safe if run-time failures within the code will not produce ill-effects, such as memory leaks, garbled data or invalid output. Exception-safe code must satisfy invariants placed on the code even if exceptions occur. There are several levels of exception safety:

  1. failure transparency, operations are guaranteed to succeed and satisfy all requirements even in presence of exceptional situations. (best)
  2. commit or rollback semantics, operations can fail, but failed operations are guaranteed to have no side effects.
  3. basic exception safety, partial execution of failed operations can cause side effects, but invariants on the state are preserved (that is, any stored data will contain valid values).
  4. minimal exception safety, partial execution of failed operations may store invalid data but will not cause a crash.
  5. no exception safety, no guarantees are made. (worst)

Usually at least basic exception safety is required. Failure transparency is difficult to implement, and is usually not possible in libraries where complete knowledge of the application is not available.

Exception support in programming languages

See also: Exception handling syntax

Certain computer languages such as Ada, C++, Common Lisp, Corn, D, Delphi, Eiffel, Java, Objective-C, Ocaml, PHP (as of version 5), Python, REALbasic, Seed7, SML and all .NET CLS-compliant languages have built-in support for exceptions and exception handling. In those languages, the advent of an exception (more precisely, an exception handled by the language) unwinds the stack of function calls until an exception handler is found. That is, if function f contains a handler H for exception E, calls function g, which in turn calls function h, and an exception E occurs in h, then functions h and g will be terminated and H in f will handle E.

Excluding minor syntactic differences, there are only a couple of exception handling styles in use. In the most popular style, an exception is initiated by a special statement (throw, or raise) with an exception object. The scope for exception handlers starts with a marker clause (try, or the language's block starter such as begin) and ends in the start of the first handler clause (catch, except, rescue). Several handler clauses can follow, and each can specify which exception classes it handles and what name it uses for the exception object.

A few languages also permit a clause (else) that is used in case no exception occurred before the end of the handler's scope was reached. More common is a related clause (finally, or ensure) that is used whether an exception occurred or not. Notably, C++ lacks this clause and the Resource Acquisition Is Initialization technique is used instead.

In its whole, exception handling code might look like this (in pseudocode): 

try {
 line = console.readLine();
 if (line.length() == 0) {
  throw new EmptyLineException("The line read from console was empty!");
 }
 console.printLine("Hello %s!" % line);
} catch (EmptyLineException e) {
 console.printLine("Hello!");
} catch (Exception e) {
 console.printLine("Error: " + e.message());
} else {
 console.printLine("The program ran successfully");
} finally {
 console.printLine("The program terminates now");
}

As a minor variation, some languages use a single handler clause, which deals with the class of the exception internally.

Languages such as Perl and C don't use the term exception handling, but include facilities that allow implementing them.

Checked exceptions

Designers of Java introduced to the language checked exceptions which are a special set of exceptions. The checked exceptions that may arise when calling a method constitute part of the type of the method. For instance, if a method might throw an IOException instead of returning successfully, it must declare this fact in its method header. Failure to do so raises a compile-time error.

This is related to exception checkers that exist at least for OCaml. The external tool for OCaml is both transparent (i.e. it does not require any syntactic annotations) and facultative (i.e. it is possible to compile and run a program without having checked the exceptions, although this is not suggested for production code).

The CLU programming language had a feature that was technically closer to what Java has introduced later. A function could raise only exceptions listed in its type, but any leaking exceptions from called functions would automatically be turned into the sole runtime exception, failure, instead of resulting in compile-time error.

Pros and cons

Checked exceptions can, at compile time, greatly reduce (but not entirely eliminate) the incidence of unhandled exceptions surfacing at runtime in a given application; the unchecked exceptions (RuntimeExceptions and Errors) can still go unhandled.

However, some see checked exceptions as a nuisance, syntactic salt that either requires large throws declarations, often revealing implementation details and reducing encapsulation, or encourages the (ab)use of poorly-considered try/catch blocks that can potentially hide legitimate exceptions from their appropriate handlers.

Others do not consider this a nuisance as you can reduce the number of declared exceptions by either declaring a superclass of all potentionally thrown exceptions or by defining and declaring exception types that are suitable for the level of abstraction of the called method Template:Ref harv, and mapping lower level exceptions to these types, preferably wrapped using the exception chaining in order to preserve the root cause.

A simple throws Exception declaration or catch (Exception e) is always sufficient to satisfy the checking. While this technique is sometimes useful, it effectively circumvents the checked exception mechanism, so it should only be used after careful consideration.

One prevalent view is that unchecked exception types should not be handled, except maybe at the outermost levels of scope, as they often represent scenarios that do not allow for recovery: RuntimeExceptions frequently reflect programming defects Template:Ref harv, and Errors generally represent unrecovereable JVM failures. The view is that, even in a language that supports checked exceptions, there are cases where the use of checked exceptions is not appropriate.

Condition systems

Common Lisp, Dylan and Smalltalk have a Condition system which encompasses the aforementioned exception handling systems. In those languages or environments the advent of a condition (a "generalisation of an error" according to Kent Pitman) implies a function call, and only late in the exception handler the decision to unwind the stack may be taken.

Conditions are a generalization of exceptions. When a condition arises, an appropriate condition handler is searched for and selected, in stack order, to handle the condition. Conditions which do not represent errors may safely go unhandled entirely; their only purpose may be to propagate hints or warnings toward the user. [1]

This is related to the so-called resumption model of exception handling, in which some exceptions are said to be continuable: it is permitted to return to the expression that signaled an exception, after having taken corrective action in the handler. The condition system is generalized thus: within the handler of a non-serious condition (a.k.a. continuable exception), it is possible to jump to predefined restart points (a.k.a. restarts) that lie between the signaling expression and the condition handler. Restarts are functions closed over some lexical environment, allowing the programmer to repair this environment before exiting the condition handler completely or unwinding the stack even partially.

Separating mechanism from policy

Condition handling moreover provides a separation of mechanism from policy. Restarts provide various possible mechanisms for recovering from error, but do not select which mechanism is appropriate in a given situation. That is the province of the condition handler, which (since it is located in higher-level code) has accessible to a broader view.

An example: Suppose there is a library function whose purpose is to parse a single syslog file entry. What should this function do if the entry is malformed? There is no one right answer, because the same library could be deployed in programs for many different purposes. In an interactive log-file browser, the right thing to do might be to return the entry unparsed, so the user can see it -- but in an automated log-summarizing program, the right thing to do might be to supply null values for the unreadable fields, but abort with an error if too many entries have been malformed.

That is to say, the question can only be answered in terms of the broader goals of the program, which are not known to the general-purpose library function. Nonetheless, exiting with an error message is only rarely the right answer. So instead of simply exiting with an error, the function may establish restarts offering various ways to continue -- for instance, to skip the log entry, to supply default or null values for the unreadable fields, to ask the user for the missing values, or to unwind the stack and abort processing with an error message. The restarts offered constitute the mechanisms available for recovering from error; the selection of restart by the condition handler supplies the policy.

References

  1. ^ Bloch, Joshua (2001). Effective Java Programming Language Guide. Addison-Wesley Professional. ISBN 0-201-31005-8.

See also

External links

Retrieved from "https://en.wikipedia.org/w/index.php?title=Exception_handling&oldid=59087200"