Mercator projection: Difference between revisions

Content deleted Content added

Inline

Revision as of 22:17, 9 November 2009

The Mercator projection is a cylindrical map projection presented by the Flemish geographer and cartographer Gerardus Mercator, in 1569. It became the standard map projection for nautical purposes because of its ability to represent lines of constant course, known as rhumb lines or loxodromes, as straight segments. While the linear scale is constant in all directions around any point, thus preserving the angles and the shapes of small objects (which makes the projection conformal), the Mercator projection distorts the size and shape of large objects, as the scale increases from the Equator to the poles, where it becomes infinite.

Properties and historical details

Mercator's 1569 edition was a large planisphere measuring 202 by 124 cm, printed in eighteen separate sheets. As in all cylindrical projections, parallels and meridians are straight and perpendicular to each other. In accomplishing this, the unavoidable east-west stretching of the map, which increases as distance away from the equator increases, is accompanied by a corresponding north-south stretching, so that at every point location, the east-west scale is the same as the north-south scale, making the projection conformal. A Mercator map can never fully show the polar areas, since linear scale becomes infinitely high at the poles. Being a conformal projection, angles are preserved around all locations. However scale varies from place to place, distorting the size of geographical objects and transmitting a wrong idea of the overall geometry of our planet. At latitudes higher than 70° north or south, the Mercator projection is practically unusable.

All lines of constant bearing (rhumb lines or loxodromes — those making constant angles with the meridians), are represented by straight segments on a Mercator map. This is precisely the type of route usually employed by ships at sea, where compasses are used to indicate geographical directions and to steer the ships. The two properties, conformality and straight rhumb lines, make this projection uniquely suited to marine navigation: courses and bearings are measured using wind roses or protractors, and the corresponding directions are easily transferred from point to point, on the map, with the help of a parallel ruler or a pair of navigational squares.

The name and explanations given by Mercator to his world map (Nova et Aucta Orbis Terrae Descriptio ad Usum Navigatium Emendate: "new and augmented description of Earth corrected for the use of navigation") show that it was expressly conceived for the use of marine navigation. Although the method of construction is not explained by the author, Mercator probably used a graphical method, transferring some rhumb lines previously plotted on a globe to a square graticule, and then adjusting the spacing between parallels so that those lines became straight, making the same angle with the meridians as in the globe.

The development of the Mercator projection represented a major breakthrough in the nautical cartography of the 16th century. However, it was much ahead of its time, since the old navigational and surveying techniques were not compatible with its use in navigation. Two main problems prevented its immediate application: the impossibility of determining the longitude at sea with adequate accuracy and the fact that magnetic directions, instead of geographical directions, were used in navigation. Only in the middle of the 18th century, after the marine chronometer was invented and the spatial distribution of magnetic declination was known, could the Mercator projection be fully adopted by navigators.

Several authors are associated with the development of Mercator projection:

German Erhard Etzlaub (c. 1460–1532), who had engraved miniature "compass maps" (about 10×8 cm) of Europe and parts of Africa, latitudes 67°–0°, to allow adjustment of his portable pocket-size sundials, was for decades declared to have designed "a projection identical to Mercator’s".

Portuguese mathematician and cosmographer Pedro Nunes (1502–1578), who first described the loxodrome and its use in marine navigation, and suggested the construction of several large-scale nautical charts in the cylindrical equidistant projection to represent the world with minimum angle distortion (1537).

English mathematician Edward Wright (c. 1558–1615), who formalized the mathematics of Mercator projection (1599), and published accurate tables for its construction (1599, 1610).

English mathematicians Thomas Harriot (1560–1621) and Henry Bond (c.1600–1678) who, independently (c. 1600 and 1645), associated the Mercator projection with its modern logarithmic formula, later deduced by calculus.

Mathematics of the projection

Relation between vertical position on the map (horizontal in the graph) and latitude (vertical in the graph).

The following equations determine the x and y coordinates of a point on a Mercator map from its latitude φ and longitude λ (with λ₀ being the longitude in the center of map):

{\begin{aligned}x&=\lambda -\lambda _{0}\\y&=\ln \left(\tan \left({\frac {\pi }{4}}+{\frac {\varphi }{2}}\right)\right)\\&={\frac {1}{2}}\ln \left({\frac {1+\sin(\varphi )}{1-\sin(\varphi )}}\right)\\&=\sinh ^{-1}\left(\tan(\varphi )\right)\\&=\tanh ^{-1}\left(\sin(\varphi )\right)\\&=\ln \left(\tan(\varphi )+\sec(\varphi )\right).\end{aligned}}

This is the inverse of the Gudermannian function:

{\begin{aligned}\varphi &=2\tan ^{-1}(e^{y})-{\frac {\pi }{2}}\\&=\tan ^{-1}(\sinh(y))\\\lambda &=x+\lambda _{0}.\end{aligned}}

The scale is proportional to the secant of the latitude φ, getting arbitrarily large near the poles, where φ = ±90°. Moreover, as seen from the formulas, the pole's y is plus or minus infinity.

Derivation of the projection

Assume a spherical Earth. (It is actually slightly flattened, but for small-scale maps the difference is immaterial. For more precision, interpose conformal latitude.) We seek a transform of longitude-latitude (λ, φ) to Cartesian (x, y) that is "a cylinder tangent to the equator" (i.e. x = λ) and conformal, so that:

{\frac {\partial x}{\partial \lambda }}=\cos(\varphi ){\frac {\partial y}{\partial \varphi }}

{\frac {\partial y}{\partial \lambda }}=-\cos(\varphi ){\frac {\partial x}{\partial \varphi }}

From x = λ we get

{\frac {\partial x}{\partial \lambda }}=1

{\frac {\partial x}{\partial \varphi }}=0

giving

1=\cos(\varphi ){\frac {\partial y}{\partial \varphi }}

0={\frac {\partial y}{\partial \lambda }}

Thus y is a function only of φ with $y'=\sec \varphi$ from which a table of integrals gives

y=\ln(|\sec(\varphi )+\tan(\varphi )|)+C.\,

It is convenient to map φ = 0 to y = 0, so take C = 0.

Notes

References

Snyder, John P. (1987). Map Projections - A Working Manual. U.S. Geological Survey Professional Paper 1395. United States Government Printing Office, Washington, D.C. This paper can be downloaded from USGS pages.
Monmonier, Mark (2004). Rhumb Lines and Map Wars. Chicago: The University of Chicago Press.
Needham, Joseph (1986). Science and Civilization in China: Volume 3; Mathematics and the Sciences of the Heavens and the Earth. Taipei: Caves Books Ltd.
Needham, Joseph (1986). Science and Civilization in China: Volume 4, Physics and Physical Technology, Part 3, Civil Engineering and Nautics. Taipei: Caves Books Ltd.
Google Maps Coordinates

External links

Ad maiorem Gerardi Mercatoris gloriam - contains high resolution images of the 1569 world map by Mercator.
Table of examples and properties of all common projections, from radicalcartography.net.
An interactive Java Applet to study the metric deformations of the Mercator Projection.
Mathematics and Derivation of the Mercator projection.

@@ Line 79: / Line 79: @@
 It is convenient to map ''φ'' = 0 to ''y'' = 0, so take ''C'' = 0.
-==Uses==
-[[Image:Tissot mercator.png|thumb|right|250px|[[Tissot's Indicatrix]]]]
-[[Image:Sinusiodal earth circles.png|thumb|right|250px|The above reprojected as sinusoidal]]
-Like all [[map projection]]s that attempt to fit a curved surface onto a flat sheet, the shape of the map is a distortion of the true layout of the Earth's surface. The Mercator projection exaggerates the size of areas far from the [[equator]]. For example:
-*[[Greenland]] is presented as having roughly as much land area as [[Africa]], when in fact Africa's area is approximately 14 times greater than Greenland.
-*[[Alaska]] is presented as having similar or even slightly more land area than [[Brazil]], when Brazil's area is actually more than 5 times that of Alaska.
-*[[Finland]] appears with a greater north-south extent than [[India]], although India's is the greater.
-Although the Mercator projection is still in common use for navigation, due to its unique properties, cartographers agree that it is not suited to large area maps due to its distortion of land area. Mercator himself used the equal-area [[sinusoidal projection]] to show relative areas.  As a result of these criticisms, modern [[atlas (geography)|atlas]]es no longer use the Mercator projection for world maps or for areas distant from the equator, preferring other [[Map projection#Cylindrical|cylindrical projection]]s, or forms of [[equal-area projection]]. The Mercator projection is still commonly used for areas near the equator, however, where distortion is minimal.
-[[Arno Peters]] stirred controversy when he proposed what is known as the [[Gall-Peters projection]], a slight modification of the Lambert Cylindrical Equal-Area projection, as ''the'' alternative to the Mercator. A 1989 resolution by seven North American geographical groups decried the use of all rectangular-coordinate world maps, including the Mercator and Gall-Peters.<ref>American Cartographer. 1989. 16(3): 222-223.</ref>
-[[Google Maps]] currently uses a Mercator projection for its map images. Despite its obvious scale distortions at small scales, the projection is well-suited as an interactive world map that can be zoomed seamlessly to large-scale (local) maps, where there is relatively little distortion due to the projection's [[conformal]] nature.  (Google Satellite Maps, on the other hand, used a [[plate carrée projection]] until [[Google Maps#Development|July 22, 2005]].)
-The [[Google Maps]] tiling system displays most of the world at zoom level 0 as a single 256 pixel-square image, excluding the polar regions. Since the Mercator coordinate ''x'' varies over 2''π'', the other coordinate is limited to -''π'' ≤ ''y'' ≤ ''π''. Because
-<math>\frac{1}{2} \ln\bigg(\frac{1+\sin(\varphi)}{1-\sin(\varphi)}\bigg) = \pm\pi \Rightarrow \varphi = \pm\arcsin\bigg(\frac{\mathrm{e}^{2 \pi}-1}{\mathrm{e}^{2 \pi}+1}\bigg)</math>
-the corresponding latitude extrema are ''φ'' = ±85.05113°. Latitude values outside this range are mapped using a different relationship that doesn't diverge at  ''φ'' = ±90°.
 ==See also==