Jump to content

Ampeg: Difference between revisions

From Wikipedia, the free encyclopedia
Browse history interactively
← Previous editNext edit →
Content deleted Content added
VisualWikitext
lc
No edit summary
Line 64: Line 64:
*[[Cyril Jordan]] - [[Flamin' Groovies]]
*[[Cyril Jordan]] - [[Flamin' Groovies]]
*Grant Brandell - [[Underoath]]
*Grant Brandell - [[Underoath]]
*[[Bruce Yolken]] - [[Echo Echo]]


== References ==
== References ==

Revision as of 23:22, 29 January 2010

Ampeg is a musical instrument amplifier manufacturer headquartered in Woodinville, Washington. Although the company specializes in the production of electric bass guitar amplification, Ampeg also manufactures electric guitar and double bass amplifiers.

Ampeg first existed under the name "Michaels-Hull Electronic Labs", as a partnership between Everett Hull, an accomplished pianist and bassist, and Stanley Michaels. The original goal of the company was to produce both a new microphone pickup that Hull designed, and to produce instrument amplifiers with a minimum of output distortion. In general, tube amplifiers will break up into a distorted sound when overdriven, an effect that Hull, a jazz musician, disliked. The pickup was intended to fit onto the end of an upright bass, and was dubbed the "Amplified Peg" or "Ampeg" for short. After gaining sole proprietorship of the company, Hull changed the company’s name to "Ampeg Bassamp Company".

Innovations

Ampeg Portaflex B-15N (early 1970s)

Ampeg prides itself on its innovative products, which have resulted in the company's six U.S. patents under the Ampeg brand name. In 1960 Jess Oliver (real name: Oliver Jesperson) created a combo amplifier with a chassis that could be inverted and tucked inside the speaker enclosure to protect the vacuum tubes. This combo bass amp became known as the "Portaflex" and remained a popular choice through the 1960s. Also in the 1960s, Ampeg became the first company to incorporate reverberation (reverb) in an amplifier with its Reverberocket, which preceded Fender’s Vibroverb amp by nearly two years.

Super Valve technology

Ampeg SVT VR "Vintage Reissue"

During the 1960s Ampeg only produced fairly low wattage combo amplifiers, and sales were declining. Rock concerts were becoming large affairs and bigger amplifiers were needed. In 1969, Ampeg's Chief Engineer Bill Hughes designed the Super Valve Technology circuitry for the amplifier of the same name. At 85 lbs, the Ampeg SVT provided 300 watts of RMS power, considerably more than most other bass amplifiers of the era. The high power rating made the SVT a candidate for use in larger venues. The SVT saw widespread use by rock acts in the 1970s. After their Hiwatt amplifiers were delayed at U.S. Customs, the Rolling Stones decided to take SVTs on tour with them.

Many original 70's SVT's are still in use today, and command premium prices on the market. A bass speaker cabinet for use with the SVT was designed by Roger Cox. These large speaker cabinets used eight 10" loudspeakers in four rows of two speakers. These cabinets were designed as a sealed, infinite baffle enclosure. Originally issued with CTS speakers, from 1972 until the purchase of the company by SLM electronics, Ampeg used Eminence loudspeakers. The use of 10" speakers for a high-powered bass amplifier was a major departure from the prevailing wisdom of the era, which was that large diameter drivers were required for low-end sound reproduction. The SVT bass amp and the companion 8 X 10" speaker cabinet have been reissued by Ampeg.

Collectability and playability

File:AmpegV4 head.jpeg
Ampeg V4

Compared to the major brands Fender and Marshall, the collectability and playability of the guitar amps is a mixed affair. While vintage Fender amps always command high prices, Ampeg guitar amps can most of the time be found for less money unlike their bass amplifier counterparts such as the V4-B, B25-B, and the B-15N, B-15S, SB-12, and B-18 portaflex series and SVT's. Aside from the sometimes too clean tone for modern use sound, the tubes found in a few certain older Ampegs can be hard to find as a few of the more obscure are not produced anymore and old stock has dried up, which makes replacement of old tubes difficult. Still, many of these formerly scarce tubes have again been manufactured, such as 7027A's (V4-B's and V4's) and 12DW7's, which are found in SVT's. In general, Ampeg guitar amps until 1964 (not their bass amps, which are in demand no matter when they were made from the 1940s up until about 1979) are not very much wanted as they have a dark, moody sound and remain very clean, even when pushed hard. From 1964 until 1967 amps became higher in wattage, reverbs were added and tubes that are easier to find nowadays began to be incorporated. From 1969 until 1979 the SVT line was introduced, and these amps are more often sought after, as are all the 60's and 70's bass amps and heads. Original SVT bass amps are very much sought-after for their fat, clear, punchy sound, and the V2 and V-4 heads along with the VT-40 and VT-22 combos are sought after for the classic 70s crunchy but clean sound. See complete article on the V-series Amps: Ampeg V Series

Instruments and accessories

Ampeg also manufactured (or had manufactured for them) lines of quirky but distinctive instruments to complement their amplifiers. This began around 1962 with the Baby Bass, an electric upright bass with a full-size wooden neck and a cello-sized Uvex plastic body (not fiberglass, as is often stated). The design was purchased from Zorko, re-engineered by Jess Oliver, and manufactured in a corner of Ampeg's Linden, New Jersey factory. It appeared in Ampeg's price list until about 1970.

In the early 1960s, Ampeg-branded guitars and basses were produced by Burns of London, but these instruments did not sell well, because the cost of importing the instruments made them too expensive compared to Fenders and Gibsons. Baldwin's purchase of Burns in 1965 ended the association with Ampeg.

Ampeg AEB-1 Horizontal Bass

In 1966, Ampeg introduced their home-built line of long-scale "Horizontal Basses" (aka "scroll" or "f-hole" basses), both fretted and fretless (reputed to be the first production fretless electric bass). Some with different bodies were produced as the "Devil Bass," with distinctive horns, but the circuitry was identical. Originally using a transducer below the bridge, they were redesigned around 1968 to use a conventional magnetic pickup. At the same time, short-scale fretted and fretless basses, with magnetic pickups, were also produced.

In 1969 the Horizontal Basses were replaced by the Dan Armstrong-designed and -built "see-through" guitars and basses. The guitars incorporated snap-in replaceable pickups to change the sound, and the short-scale basses used two stacked coils with a pan pot to gain a very wide range of tones. The transparent lucite bodies were Armstrong's original idea and contributed to incredibly long sustain but were very heavy. Ampeg's production of the "see-through" instruments ended in 1971 due to financial disagreements between Armstrong and Ampeg over amplifier designs.

In the mid-1970s, Ampeg had a line of Japanese-made guitars and basses under the "Stud" name. The guitars included the Stud, Heavy Stud, and Super Stud, and the basses included the Big Stud and Little Stud. The Studs were knock-offs of popular Fender and Gibson instruments. Some of the Stud instruments were poorly built (e.g. the plywood bodies and necks on the Little Stud), while others had good-quality features (e.g., gold-plated hardware on the Super Stud). In the late 1990s, Ampeg reissued of the Baby Bass, the Horizontal Bass, and the "See-Through" instruments, as well as wooden instruments based on the "See- Through" design.

Ampeg also produced effects pedals, including stand-alone reverb units in the 60s, the Scrambler from 1969 (a resurgence in interest resulted in an updated Scrambler being reissued in 2005), the Phazzer from the mid- to late-70s, and a line of nine stompboxes produced in Japan in the mid-80s. There were also Ampeg-branded picks, strings, straps, polish, as well as two practice amps, the Sound Cube and the Buster (a Pignose clone).

Ampeg now

The current Ampeg company is mainly successful in the field of bass amps. They also have a line of guitar amplifiers and a remake of the Dan Armstrong guitar and bass.

Lee Jackson designed the VL line of guitar amplifiers for Ampeg in the late 1980s, early 1990s. They were available in both 50W and 100W heads and a 50W 2x12 combo.

In 2005, Ampeg, and its parent company, St. Louis Music (also makers of Crate amps) were purchased by Loud Technologies (LTEC on the NYX). In March 2007, Loud ceased production of Ampeg and Crate at the manufacturing facility in Yellville, AR, outsourcing the manufacture of Ampeg and Crate to contract manufacturers in Asia. In May, 2007, Loud closed and sold the plant in Yellville, AR and also closed the Ampeg and Crate engineering department in St. Louis, MO, preferring to have new models designed by their own engineers, as well as an Asian engineering group. These moves have been strongly questioned 'on the streets', as it has raised concerns about the overall quality, especially among Ampeg users. A major selling point for Ampeg in the past was that it was designed and made in America.

Selected Ampeg users

References

  • Milestones section at official website
  • History section at official website
  • Dan Armstrong: The Man and His Guitars
  • Hopkins, Gregg (1999). Ampeg: The Story Behind the Sound. Milwaukee: Hal Leonard Corporation. ISBN 0-7935-7951-1. {{cite book}}: Unknown parameter |coauthors= ignored (|author= suggested) (help)
  • Ampeg (1950s-2005) Various sales brochures and advertisements.
  • The Official Ampeg Page

Further reading

External links

Retrieved from "https://en.wikipedia.org/w/index.php?title=Ampeg&oldid=340806223"