Fire door: Difference between revisions
Max Cheung (talk | contribs) m →External links: fix typo |
|||
Line 87: | Line 87: | ||
# Gasketing and edge seals, where required, are inspected to verify their presence and integrity. |
# Gasketing and edge seals, where required, are inspected to verify their presence and integrity. |
||
According to building and fire codes, annual fire door inspections is the responsibility of the building owner. However, as with other mandatory fire inspections, such as the inspection of [[fire damper]]s, the fire door inspections are often omitted and many facilities are out of compliance. |
According to building and fire codes, annual fire door inspections is the responsibility of the building owner. However, as with other mandatory fire inspections, such as the inspection of [[fire damper]]s, the fire door inspections are often omitted and many facilities are out of compliance.{{Citation needed|date=June 2010}} |
||
[http://www.ifdia.org The International Fire Door Inspector Association], a trade association, with a patent pending online report generation tool, is made up of professional fire door inspectors. The association is a free service to building owners, the AHJ community and vetted fire door inspectors and allows for building owners to find suitable inspectors to carry out inspections. Most members of the IFDIA are either graduates of the IFDIA accredited curriculum (International Accreditation Services http://www.iasonline.org, a sister company of the International Code Council http://www.iccsafe.org), or DHI graduates. There is also the newly formed Certified Association of Fire Door Inspectors http://www.CAFDI.org, made up of individuals who have taken the ''non accredited'' Door Hardware Institute Fire Door Assembly Inspection class and obtained certified status from Intertek Testing Services. |
[http://www.ifdia.org The International Fire Door Inspector Association], a trade association, with a patent pending online report generation tool, is made up of professional fire door inspectors. The association is a free service to building owners, the AHJ community and vetted fire door inspectors and allows for building owners to find suitable inspectors to carry out inspections. Most members of the IFDIA are either graduates of the IFDIA accredited curriculum (International Accreditation Services http://www.iasonline.org, a sister company of the International Code Council http://www.iccsafe.org), or DHI graduates. There is also the newly formed Certified Association of Fire Door Inspectors http://www.CAFDI.org, made up of individuals who have taken the ''non accredited'' Door Hardware Institute Fire Door Assembly Inspection class and obtained certified status from Intertek Testing Services. |
Revision as of 14:53, 28 June 2010
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/af/Fire_door.jpg/250px-Fire_door.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/9/97/Durasteel_fire_door_stainless.jpg/250px-Durasteel_fire_door_stainless.jpg)
A fire door is a door with a fire-resistance rating (sometimes referred to as a fire protection rating for closures) used as part of a passive fire protection system to reduce the spread of fire or smoke between compartments and to enable safe egress from a building or structure or ship. In North American building codes, it, along with fire dampers, is often referred to as a closure, which can be derated compared against the fire separation that contains it, provided that this barrier is not a firewall or an occupancy separation.
Components
Fire doors may be made of a combination of materials, such as:
- timber
- steel
- gypsum (as an endothermic fill)
- vermiculite-boards
- glass sections
Both the door leaf (the swinging panel of the door) there and the door frame is required to meet the guidelines of the testing agency which provides the product listing. The door frame includes the fire or smoke seals, door hardware, and the structure that holds the fire door assembly in place. Together, these components form an assembly, typically called a "doorset" which holds a numerical rating, quantified in hours of resistance to a test fire. All of the components of the fire door assembly must bear a listing agencies label (with the exception of ball bearing hinges which meet the basic build requirements of ANSI 156.2 and NFPA 80) to ensure the components have been tested to meet the fire rating requirements.
Door hardware
Door hardware includes, but is not limited to:
- Automatic closing devices.
- Ball bearing hinges.
- Positive latching mechanism.
Seals
Edges of a fire door usually need to have fire rated seals which can be composed of:
- An intumescent strip, which expands when exposed to heat
- Neoprene weatherstripping
- Gaskets to prevent the passage of smoke
When intumescent seals are used in the door design, use of the correct seal is crucial in the fire rating performance the door assembly. Seals may vary in chemical composition, expansion rate, expansion volume, and/or charring characteristics.
Windows
Some fire doors are equipped with internal windows which also have a rating, or have been incorporated at the time of the door test and be subject to the overall door's product certification. Fire-resistive windows must remain intact under fire conditions and hose stream impact resistance, and can include:
- Wire mesh glass
- Liquid sodium silicate fills between two window panes
- Ceramic glasses
- Borosilicate glass
Wired glass typically withstands the fire, whereas the sodium silicate liquid also acts to insulate heat transfer, due to the endothermic action of this chemical.
Regulations
All components are required to adhere to product certification requirements that are acceptable to the local Authority Having Jurisdiction (AHJ) by meeting the requirements of the local building code and fire code. The regulatory requirement will change from country to country.
For example in the United Kingdom a fire resisting doorset should be sujected to either a British Standard Fire Test BS 476 Part 22 1987, or a BS/EN 1634-1 2000 test. The results are recorded by the test agency and provided in a report which detail such things as constructional details, distortion data and pressure readings. The numerical fire resistance rating that is required to be installed in a particular building is provided in the Building Regulations approved Document B, or British Standards such as the BS 5588 series (e.g., 30 minutes FD30, or FD30(S) if cold smoke resistance is also required).
Similar technical guidance documents and building regulations are in effect in other countries.
Combustibility
Fire doors are not necessarily noncombustible. It is acceptable for portions of the door to be destroyed by combustion during exposure to a fire as long as the door assembly meets the fire test criteria of limiting temperature limits on the non-fire side of the assembly. This is in accordance with the overall performance goal of a fire rated door to slow fire propagation from one fire rated compartment to another for only a limited amount of time, during which automatic or manual fire fighting may be employed to limit fire spread, or occupants can exit the building.
Fire door failure
Fire doors are sometimes rendered unable to provide its listed fire resistance by ignorance of the intended use and associated restrictions and requirements, or by inappropriate use. For example, fire doors are sometimes blocked open, or carpets are run through them, which would allow the fire to travel past the fire barrier in which the door is placed. The door's certification markings are displayed both on the door leaves and the fire door frames, and should not be removed or painted over during the life of the building.
Sometimes fire doors have apparently very large gaps at the foot of them, an inch or two even, allowing air movement, such as in dormitory facilities. This can lead the occupants of a building to question their status as 'real' fire doors. Testing of fire doors include a maximum door undercut of 3/4 inch[1]. Corridors have a fire rating of one hour or less, and the fire doors in them are required by code to have a fire rating of 1/2 or 1/3 hr, the intent of which is mainly to restrict smoke travel[2].
Normal operation
Most fire doors are designed to be kept closed at all times. Some doors are designed to stay open under normal circumstances, and close automatically in the event of a fire. Whichever method is used, the door's movement should never be impaired by a doorstop or other obstacle. The intumescent and smoke-seal bounding of fire doors should be routinely checked, as should the action of the door closer and latch.
Some fire doors are held open with an electromagnet, which may be wired to a fire alarm system. If the power fails or the fire alarm is activated, the coil is de-energized and the door closes on its own.
Rated fire doors are tested to withstand a fire for a specified period. There are 20, 30, 45, 60 and 90-minute-rated fire doors that are certified by an approved laboratory (e.g. Underwriters Laboratories). The certification only applies if all parts of the installation are correctly specified and installed. For example, fitting the wrong kind of glazing may severely reduce the door's fire resistance period.
Installation
As well as ensuring the door is hung properly and squarely, it is also very important that where a fire door is installed, any gaps left in the opening between the wall and the door frame must be properly filled with fire resisting material. Fire doors are normally installed by a carpenter.
Architect's responsibility
In building design drawings with poor identification of which walls do in fact have a fire-resistance rating, it is often necessary to check the door schedule in the specifications to be able to trace what walls are rated and how long they are rated for. This is an indicative sign about the architect and the degree of care taken particularly with items relating to passive fire protection. To avoid confusion about any fire protection measures including fire doors, it is best for the architect to provide a separate set of drawings that clearly outlines which walls and floor have a fire-resistance rating and exactly what that rating is. It is also important to point out especially which walls are firewalls and which walls and/or floors are designated as occupancy separations, as the nature of passive fire protection devices that must be used in those special cases can be substantially different from such devices that are used in ordinary fire separations.
Annual inspection
NFPA 80, 2007 Edition, Standard for Fire Doors, Frames and Other Opening Protectives (5.2.4)[3], requires annual inspections of fire-resistance rated door and frame assemblies. Local Authorities Having Jurisdiction must adopt the new edition for this requirement to take effect. Most jurisdictions in the United States will be adopting the IBC (International Building Code) model code, which references the NFPA 80 2007 edition requirement, as their local codes.
NFPA 80 5.2.4.requires the following items shall be verified, at minimum:
- No Open Holes or breaks exist in surfaces of either the door or frame.
- Glazing, vision light frames & glazing beads are intact and securely fastened in place, if so equipped.
- The door, frame, hinges, hardware, and noncombustible threshold are secured, aligned, and in working order with no visible signes of damage.
- No parts are missing or broken.
- Door clearances at the door edge of the door frame, on the pull side of the door, do not exceed clearances listed in 4.8.4 (the clearance under the bottom of the door shall be a maximum of 3/4") and 6.3.1 (top & edges 1/8")
- The self-closing device is operational; that is, the active door completely closes when operated from the full open position.
- If a coordinator is installed, the inactive leaf closes before the active leaf.
- Latching hardware operates and secure the door when it is in the closed position.
- Auxiliary hardware items that interfere or prohibit operation are not installed on the door or frame.
- No field modifications to the door assembly have been performed that void the label.
- Gasketing and edge seals, where required, are inspected to verify their presence and integrity.
According to building and fire codes, annual fire door inspections is the responsibility of the building owner. However, as with other mandatory fire inspections, such as the inspection of fire dampers, the fire door inspections are often omitted and many facilities are out of compliance.[citation needed]
The International Fire Door Inspector Association, a trade association, with a patent pending online report generation tool, is made up of professional fire door inspectors. The association is a free service to building owners, the AHJ community and vetted fire door inspectors and allows for building owners to find suitable inspectors to carry out inspections. Most members of the IFDIA are either graduates of the IFDIA accredited curriculum (International Accreditation Services http://www.iasonline.org, a sister company of the International Code Council http://www.iccsafe.org), or DHI graduates. There is also the newly formed Certified Association of Fire Door Inspectors http://www.CAFDI.org, made up of individuals who have taken the non accredited Door Hardware Institute Fire Door Assembly Inspection class and obtained certified status from Intertek Testing Services.
The final say on the acceptance of any inspection requires the approval of the AHJ (Authority Having Jurisdiction).
Modifications
NFPA 80 includes guidelines concerning field modifications of listed hardware, including frames, builder's hardware, doors, thresholds etc. The growing field of access control and electronic entry systems has resulted in some fire doors being field modified without proper listing agency approval. Field modifications of fire listed assemblies must either be inspected by a listing agency representative, or the modification must be performed by personnel certified to perform such work[4].
See also
![](http://upload.wikimedia.org/wikipedia/en/thumb/4/4a/Commons-logo.svg/30px-Commons-logo.svg.png)
External links
- Door and Hardware Institute
- UL treatise on fire door, hardware and window testing
- Scope for Fire Tests of Door Assemblies UL 10B
- Scope for Positive Pressure Fire Tests of Door Assemblies UL 10C
- Scope for Air Leakage Tests of Door Assemblies UL 1784
- ULC Treatise on Fire Door & Fire Window Testing
References
- ^ NFPA 80 Standard for Fire Doors and Other Opening Protectives 2007 Edition, section 4.8.4.1
- ^ NFPA 80 Standard for Fire Doors and Other Opening Protectives 2007 Edition, Annex D Fire Door and Fire Window Classifications, section D.5
- ^ http://www.nfpa.org
- ^ http://www.nfpa.org/publicColumn.asp?categoryID=&itemID=37323&src=NFPAJournal NFPA article on door modifications