Linker (computing): Difference between revisions
→References: see also |
→References: wikilink |
||
Line 55: | Line 55: | ||
*C. W. Fraser and D. R. Hanson, ''A Machine Independent Linker''. Software-Practice and Experience 12, 4 (April 1982). |
*C. W. Fraser and D. R. Hanson, ''A Machine Independent Linker''. Software-Practice and Experience 12, 4 (April 1982). |
||
*IBM Corporation, ''Operating System 360, Linkage Editor, Program Logic Manual'', 1967 [http://www.bitsavers.org/pdf/ibm/360/Y28-6610_LinkEdit(E)_PLM.pdf] |
*IBM Corporation, ''Operating System 360, Linkage Editor, Program Logic Manual'', 1967 [http://www.bitsavers.org/pdf/ibm/360/Y28-6610_LinkEdit(E)_PLM.pdf] |
||
* |
*[[Douglas W. Jones]], ''Assembly Language as Object Code''. Software-Practice and Experience 13, 8 (August 1983) |
||
*[[John R. Levine]]: ''Linkers and Loaders'', Morgan-Kauffman, ISBN 1-55860-496-0 |
*[[John R. Levine]]: ''Linkers and Loaders'', Morgan-Kauffman, ISBN 1-55860-496-0 |
||
*Leon Presser, John R. White: ''Linkers and Loaders''. ACM Computing Surveys, Volume 4, Number 3, September 1972, pp.149-167 [http://www-inst.eecs.berkeley.edu/~cs162/sp06/hand-outs/p149-presser-linker-loader.pdf] |
*Leon Presser, John R. White: ''Linkers and Loaders''. ACM Computing Surveys, Volume 4, Number 3, September 1972, pp.149-167 [http://www-inst.eecs.berkeley.edu/~cs162/sp06/hand-outs/p149-presser-linker-loader.pdf] |
Revision as of 22:34, 4 February 2011
![](http://upload.wikimedia.org/wikipedia/commons/thumb/b/b1/Linker.svg/200px-Linker.svg.png)
In computer science, a linker or link editor is a program that takes one or more objects generated by a compiler and combines them into a single executable program.
In IBM mainframe environments such as OS/360 this program is known as a linkage editor.
On Unix variants the term loader is often used as a synonym for linker. Other terminology was in use, too. For example, on SINTRAN III the process performed by a linker (assembling object files into a program) was called loading (as in loading executable code onto a file)[1]. Because this usage blurs the distinction between the compile-time process and the run-time process, this article will use linking for the former and loading for the latter. However, in some operating systems the same program handles both the jobs of linking and loading a program; see dynamic linking.
Overview
Computer programs typically comprise several parts or modules; all these parts/modules need not be contained within a single object file, and in such case refer to each other by means of symbols. Typically, an object file can contain three kinds of symbols:
- defined symbols, which allow it to be called by other modules,
- undefined symbols, which call the other modules where these symbols are defined, and
- local symbols, used internally within the object file to facilitate relocation.
When a program comprises multiple object files, the linker combines these files into a unified executable program, resolving the symbols as it goes along.
Linkers can take objects from a collection called a library. Some linkers do not include the whole library in the output; they only include its symbols that are referenced from other object files or libraries. Libraries exist for diverse purposes, and one or more system libraries are usually linked in by default.
The linker also takes care of arranging the objects in a program's address space. This may involve relocating code that assumes a specific base address to another base. Since a compiler seldom knows where an object will reside, it often assumes a fixed base location (for example, zero). Relocating machine code may involve re-targeting of absolute jumps, loads and stores.
The executable output by the linker may need another relocation pass when it is finally loaded into memory (just before execution). This pass is usually omitted on hardware offering virtual memory — every program is put into its own address space, so there is no conflict even if all programs load at the same base address. This pass may also be omitted if the executable is a position independent executable.
Dynamic linking
Many operating system environments allow dynamic linking, that is the postponing of the resolving of some undefined symbols until a program is run. That means that the executable code still contains undefined symbols, plus a list of objects or libraries that will provide definitions for these. Loading the program will load these objects/libraries as well, and perform a final linking.
This approach offers two advantages:
- Often-used libraries (for example the standard system libraries) need to be stored in only one location, not duplicated in every single binary.
- If an error in a library function is corrected by replacing the library, all programs using it dynamically will benefit from the correction after restarting them. Programs that included this function by static linking would have to be re-linked first.
There are also disadvantages:
- Known on the Windows platform as "DLL Hell", an incompatible updated DLL will break executables that depended on the behavior of the previous DLL.
- A program, together with the libraries it uses, might be certified (eg as to correctness, documentation requirements, or performance) as a package, but not if components can be replaced. (This also argues against automatic OS updates in critical systems; in both cases, the OS and libraries form part of a qualified environment.)
Relaxation
As the compiler has no information on the layout of objects in the final output, it cannot take advantage of shorter or more efficient instructions that place a requirement on the address of another object. For example, a jump instruction can reference an absolute address or an offset from the current location, and the offset could be expressed with different lengths depending on the distance to the target. By generating the most conservative instruction (usually the largest relative or absolute variant, depending on platform) and adding relaxation hints, it is possible to substitute shorter or more efficient instructions during the final link. This step can be performed only after all input objects have been read and assigned temporary addresses; the relaxation pass subsequently re-assigns addresses, which may in turn allow more relaxations to occur. In general, the substituted sequences are shorter, which allows this process to always converge on the best solution given a fixed order of objects; if this is not the case, relaxations can conflict, and the linker needs to weigh the advantages of either option.
See also
- Dynamic library
- GNU linker
- Library
- Name decoration
- Object file
- Relocation
- Relocation table
- Prelinking
- Static library
References
- ^ BRF-LINKER User Manual. ND-60.196.01. 08/84.
- David William Barron, Assemblers and Loaders. 1972, Elsevier.
- C. W. Fraser and D. R. Hanson, A Machine Independent Linker. Software-Practice and Experience 12, 4 (April 1982).
- IBM Corporation, Operating System 360, Linkage Editor, Program Logic Manual, 1967 [1]
- Douglas W. Jones, Assembly Language as Object Code. Software-Practice and Experience 13, 8 (August 1983)
- John R. Levine: Linkers and Loaders, Morgan-Kauffman, ISBN 1-55860-496-0
- Leon Presser, John R. White: Linkers and Loaders. ACM Computing Surveys, Volume 4, Number 3, September 1972, pp.149-167 [2]
- Norman Ramsey, Relocating Machine Instructions by Currying. (1996) [3]
- David Salomon, Assemblers and Loaders. 1993 [4]
External links
![](http://upload.wikimedia.org/wikipedia/commons/thumb/9/99/Wiktionary-logo-en-v2.svg/40px-Wiktionary-logo-en-v2.svg.png)