Automatic identification system: Difference between revisions
mNo edit summary |
|||
Line 55: | Line 55: | ||
Others{{Who|date=July 2010}} have countered that AIS provides the same information that can be obtained with a pair of binoculars{{cite}} and that ships have the option of turning off AIS when they are in areas with security concerns. |
Others{{Who|date=July 2010}} have countered that AIS provides the same information that can be obtained with a pair of binoculars{{cite}} and that ships have the option of turning off AIS when they are in areas with security concerns. |
||
However, binoculars need line of sight and clear visibility so |
However, binoculars need line of sight and clear visibility so do not help in fog or where a land mass obstructs the view, unlike AIS radio waves. Vessels can turn off AIS to attempt to be invisible but since they can still be seen by radar the absence of an AIS signal would highlight them as unusual and worthy of investigation where security or piracy are priorities. |
||
=== Range limitations and space-based tracking === |
=== Range limitations and space-based tracking === |
Revision as of 16:19, 1 March 2012
The Automatic Identification System (AIS) is an automatic tracking system used on ships and by Vessel traffic services (VTS) for identifying and locating vessels by electronically exchanging data with other nearby ships and AIS Base stations. AIS information supplements marine radar, which continues to be the primary method of collision avoidance for water transport.
![](http://upload.wikimedia.org/wikipedia/commons/thumb/c/c3/OperationsSpecialistVTS.jpg/220px-OperationsSpecialistVTS.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/63/Ais_dcu_bridge.jpg/300px-Ais_dcu_bridge.jpg)
![](http://upload.wikimedia.org/wikipedia/commons/thumb/d/d4/AIS_Manche_Est.png/400px-AIS_Manche_Est.png)
Information provided by AIS equipment, such as unique identification, position, course, and speed, can be displayed on a screen or an ECDIS. AIS is intended to assist a vessel's watchstanding officers and allow maritime authorities to track and monitor vessel movements. AIS integrates a standardized VHF transceiver with a positioning system such as a LORAN-C or GPS receiver, with other electronic navigation sensors, such as a gyrocompass or rate of turn indicator. Ships outside AIS radio range can be tracked with the Long Range Identification and Tracking (LRIT) system with less frequent transmission.
The International Maritime Organization's (IMO) International Convention for the Safety of Life at Sea (SOLAS) requires AIS to be fitted aboard international voyaging ships with 300 or more GT GT uses unsupported parameter (help), and all passenger ships regardless of size. It is estimated that more than 40,000 ships currently carry AIS class A equipment.[citation needed] In 2007, the new Class B AIS standard was introduced which enabled a new generation of low cost AIS transceivers. This has triggered multiple additional national mandates from Singapore, China, Turkey and North America affecting hundreds of thousands of vessels.
Applications and limitations
Collision avoidance
AIS is used in navigation primarily for collision avoidance. Due to the limitations of VHF radio communications, and because not all vessels are equipped with AIS, the system is meant to be used primarily as a means of lookout and to determine risk of collision rather than as an automatic collision avoidance system, in accordance with the International Regulations for Preventing Collisions at Sea (COLREGS).
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/a7/Ships_AIS_display_with_lists_of_nearby_vessels.jpg/220px-Ships_AIS_display_with_lists_of_nearby_vessels.jpg)
When a ship is navigating at sea, the movement and identity of other ships in the vicinity is critical for navigators to make decisions to avoid collision with other ships and dangers (shoal or rocks). Visual observation (unaided, binoculars, night vision), audio exchanges (whistle, horns, VHF radio), and radar or Automatic Radar Plotting Aid (ARPA) are historically used for this purpose. However, a lack of positive identification of the targets on the displays, and time delays and other limitation of radar for observing and calculating the action and response of ships around, especially on busy waters, sometimes prevent possible action in time to avoid collision.
While requirements of AIS are only to display a very basic text information, the data obtained can be integrated with a graphical electronic chart or a radar display, providing consolidated navigational information on a single display.
Vessel traffic services
In busy waters and harbors, a local vessel traffic service (VTS) may exist to manage ship traffic. Here, AIS provides additional traffic awareness and provides the service with information on the kind of other ships and their movement.
Aids (SBNP) to navigation
AIS was developed with the ability to broadcast positions and names of objects other than vessels, like navigational aid and marker positions. These aids can be located on shore, such as in a lighthouse, or on the water, on platforms or buoys. The US Coast Guard suggests that AIS might replace racon (radar beacons) currently used for electronic navigation aids.[1]
The ability to broadcast navigational aid positions has also created the concepts of Synthetic AIS and Virtual AIS. In the first case, an AIS transmission describes the position of physical marker but the signal itself originates from a transmitter located elsewhere. For example, an on-shore base station might broadcast the position of ten floating channel markers, each of which is too small to contain a transmitter itself. In the second case, it can mean AIS transmissions that indicate a marker which does not exist physically, or a concern which is not visible (i.e., submerged rocks, or a wrecked ship). Although such virtual aids would only be visible to AIS equipped ships, the low cost of maintaining them could lead to their usage when physical markers are unavailable.
Search and rescue
For coordinating resources on scene of marine search and rescue operation, it is important to know the position and navigation status of ships in the vicinity of the ship or person in distress. Here AIS can provide additional information and awareness of the resources for on scene operation, even though AIS range is limited to VHF radio range. The AIS standard also envisioned the possible use on SAR aircraft, and included a message (AIS Message 9) for aircraft to report position.
To aid SAR vessels and aircraft in locating people in distress a standard for an AIS-SART AIS Search and Rescue Transmitter is currently being developed by the International Electrotechnical Commission (IEC), the standard is scheduled to be finished by the end of 2008 and AIS-SARTs will be available on the market from 2009.
Accident investigation
AIS information received by VTS is important for accident investigation to provide the accurate time, identity, position by GPS, compass heading, course over ground (COG), speed (by log/SOG) and rate of turn (ROT) of the ships involved for accident analysis, rather than limited information (position, COG, SOG) of radar echo by radar.
The maneuvering information of the events of the accident is important to understand the actual movement of the ship before accident, particularly for collision, grounding accidents.
A more complete picture of the events could be obtained by Voyage Data Recorder (VDR) data if available and maintained on board for details of the movement of the ship, voice communication and radar pictures during the accidents. However, VDR data are not maintained due to the limited twelve hours storage by IMO requirement.
Other reference:
Binary messages
AIS messages 6, 8, 25, and 26 provide "Application Specific Messages" (ASM), that allow "competent authorities" to define additional AIS message sub-types. There are addressed (ABM) and broadcast (BBM) variants of the message. Addressed messages, while containing a destination MMSI, are not private and may be decoded by any receiver. One of the first uses of ASM's was the Saint Lawrence Seaway use of AIS binary messages (message type 8) to provide information about water levels, lock orders, and weather. The Panama Canal uses AIS type 8 messages to provide information about rain along the canal and wind in the locks. In 2010, International Maritime Organization issued Circular 289 that defines the next iteration of ASM's for type 6 and 8 messages.[2] Alexander, Schwehr and Zetterberg proposed that the community of competent authorities work together to maintain a regional register of these messages and their locations of use.[3]
Computing and networking
Several computer programs have been created for use with AIS data. Some programs (such as ShipPlotter and Gnuais) use a computer to demodulate the raw audio from a modified marine VHF radiotelephone when tuned to the AIS broadcast frequency (Channel 87 and 88) into AIS data. Some programs can re-transmit the AIS information to a local or global network allowing the public or authorized users to observe vessel traffic from the web. Some programs display AIS data received from a dedicated AIS receiver onto a computer or chartplotter. Most of these programs are not AIS transmitters, thus they will not broadcast your vessel's position but may be used as an inexpensive alternative for smaller vessels to help aid navigation and avoid collision with larger vessels that are required to broadcast their position. Ship enthusiasts also use receivers to track and find vessels to add to their photo collections.[4]
AIS data on the Internet
AIS position data are available on the Internet through privately operated geographic information systems. In December 2004, the International Maritime Organization's (IMO) Maritime Safety Committee condemned the Internet publication of AIS data as follows:[5]
In relation to the issue of freely available automatic identification system (AIS)-generated ship data on the world-wide web, the publication on the world-wide web or elsewhere of AIS data transmitted by ships could be detrimental to the safety and security of ships and port facilities and was undermining the efforts of the Organization and its Member States to enhance the safety of navigation and security in the international maritime transport sector.
Others[who?] have countered that AIS provides the same information that can be obtained with a pair of binoculars {{citation}}
: Empty citation (help) and that ships have the option of turning off AIS when they are in areas with security concerns.
However, binoculars need line of sight and clear visibility so do not help in fog or where a land mass obstructs the view, unlike AIS radio waves. Vessels can turn off AIS to attempt to be invisible but since they can still be seen by radar the absence of an AIS signal would highlight them as unusual and worthy of investigation where security or piracy are priorities.
Range limitations and space-based tracking
Shipboard AIS transponders have a horizontal range that is highly variable but typically only about 74 kilometres (46 mi). They reach much further vertically, up to the 400 km orbit of the International Space Station (ISS).
In June 2008, ORBCOMM launched new low-earth orbit (LEO) satellites for their machine-to-machine communications constellation. In parallel with ORBCOMM's contract with the United States Coast Guard to launch its AIS receiver-equipped Concept Demonstration Satellite (CDS), all of these new satellites were equipped with AIS receivers. ORBCOMM became the first commercial service provider of satellite AIS, having licensed satellite AIS data service to qualified government and commercial subscribers since the beginning of 2009. Additionally, ORBCOMM has incorporated AIS receivers in its next 18 ORBCOMM Generation 2 (0G2) satellites under development. As additional satellites are launched, ORBCOMM will increase its capability by providing greater redundancy and more frequent updates of AIS data. ORBCOMM's established terrestrial network of 15 Gateway Earth Stations around the world ensures timely delivery of the satellite AIS data to its subscribers.[6]
ORBCOMM also contracted with Luxspace to provide two dedicated AIS detection satellites, one a polar orbiting satellite, and the other an equatorial orbiting satellite. The equatorial orbiting satellite, VesselSat1, was successfully launched on October 12, 2011 aboard the ISRO PSLV rocket out of India. The polar orbiting satellite, VesselSat2, has been launched on January 9, 2012 by a Long March 4B from Taiyuan Satellite Launch Center (TSLC) into a sun-synchronous orbit.
On April 28, 2008, Canadian company COM DEV International, became the first company to launch a space-based AIS nano-satellite designed to detect AIS signals from space,[7] and is currently deploying a full micro-satellite constellation, global ground network and centralized data processing center in order to offer global AIS data services. The service is operational and available worldwide as of mid-2010 through exactEarth, COM DEV's data services subsidiary. exactEarth uses a patented ground and space-based processing technology to minimize interference of collided AIS signals, therefore dramatically improving detection compared with all other satellite-based systems. As more satellites are launched, refresh rates will continue to increase as well.
In November 2009, the STS-129 space shuttle mission attached two antennas - an AIS VHF antenna, and an Amateur Radio antenna to the Columbus module of the ISS. Both antennas were built in cooperation between ESA and the ARISS team (Amateur Radio on ISS). Starting from May 2010 the European Space Agency is testing two different AIS receivers, one from Luxspace (GdL), one from FFI (Norway) in the frame of technology demonstration for space-based ship monitoring. This is a first step towards a satellite-based AIS-monitoring service.[8]
In 2009, Luxspace, a Grand Duchy of Luxembourg based company has launched PathFinder2, (ex-Rubin) and is now the only European company to have an operational system in orbit providing data from all over the world on a daily basis. The satellite is operated in cooperation with SES and REDU Space Services.[9]
In 2007, a previous test of space-based AIS tracking by the U.S. TacSat-2 satellite suffered from signal corruption because the AIS signals interfered with each other.[10]
In July 2009, SpaceQuest launched AprizeSat-3 and AprizeSat-4 with AIS receivers.[11] These receivers have been able to pick up the USCG's SART search and rescue test beacons off of Hawaii in 2010.[12] In July 2010, SpaceQuest and exactEarth of Canada announced an arrangement whereby data from AprizeSat-3 and AprizeSat-4 would be incorporated into the exactEarth system and made available worldwide as part of their exactAIS(TM)service.
On July 12, 2010, The Norwegian AISSat-1 satellite was successfully launched into polar orbit. The purpose of the satellite is to improve surveillance of maritime activities in the High North. AISSat-1 is a nano satellite measuring 20 x 20 x 20 cm. It weighs six kilograms and is shaped like a cube.[13][14]
Type testing and approval
Class A AIS products are for ships over 300 tonnes or which are SOLAS vessels and are required to meet the guidelines set out in the Marine Equipment Directive.
Class B AIS products are for non-SOLAS vessels. They need testing and certification under the R&TTE Directive for the European Union and FCC and Industry Canada certification for North America.
How AIS works
![](http://upload.wikimedia.org/wikipedia/commons/thumb/e/e0/AIS-USCG-Overview.jpg/220px-AIS-USCG-Overview.jpg)
Basic overview
AIS transponders automatically broadcast information, such as their position, speed, and navigational status, at regular intervals via a VHF transmitter built into the transponder. The information originates from the ship's navigational sensors, typically its global navigation satellite system (GNSS) receiver and gyrocompass. Other information, such as the vessel name and VHF call sign, is programmed when installing the equipment and is also transmitted regularly. The signals are received by AIS transponders fitted on other ships or on land based systems, such as VTS systems. The received information can be displayed on a screen or chart plotter, showing the other vessels' positions in much the same manner as a radar display.
The AIS standard comprises several sub-standards 'Types' which specify individual product types. The specification for each product type provides a detailed technical specification which ensures the overall integrity of the global AIS system within which all the product types must operate. The major product types described in the AIS system standards are:
- Class A
- Vessel mounted AIS transceiver (transmit and receive) which operates using self-organised time-division multiple-access (SOTDMA). Class A's must have an integrated display, transmit at 12 W, interface capability with multiple ship systems, and offer a sophisticated selection of features and functions. Default transmit rate is every few seconds. AIS Class A type compliant devices receive all types of AIS messages.
- Class B
- Vessel mounted AIS transceiver (transmit and receive) which operates using carrier-sense time-division multiple-access (CSTDMA). Class Bs transmit at 2 W and are not required to have an integrated display: Class Bs can be connected to most display systems which the received messages will be displayed in lists or overlayed on charts. Default transmit rate is normally every 30 seconds, but this can be varied according to vessel speed or instructions from base stations. The Class B type standard requires integrated GPS and certain LED indicators. Class B equipment receives all types of AIS messages.
- Base station
- Shore based AIS transceiver (transmit and receive) which operates using SOTDMA. Base stations have a complex set of features and functions which in the AIS standard are able to control the AIS system and all devices operating therein. Ability to interrogate individual transponders for status reports and or transmit frequency changes.
- Aids to navigation (AtoN)
- Shore or buoy based transceiver (transmit and receive) which operates using fixed-access time-division multiple-access (FATDMA). Designed to collect and transmit data related to sea and weather conditions as well as relay AIS messages to extend network coverage.
AIS receivers are not specified in the AIS standards, because they do not transmit. The main threat to the integrity of any AIS system are non-compliant AIS transmissions, hence careful specifications of all transmitting AIS devices. However, it is well to note that AIS transceivers all transmit on multiple channels as required by the AIS standards. As such single-channel, or multiplexed, receivers will not receive all AIS messages. Only dual-channel receivers will receive all AIS messages.
Message types
There are 27 different types of top level messages defined in ITU 1371-4 (out of a possibility of 64) that can be sent by AIS transceivers.[15][16]
Detailed description: Class A units
Each AIS transponder consists of one VHF transmitter, two VHF TDMA receivers, one VHF Digital Selective Calling (DSC) receiver, and links to shipboard display and sensor systems via standard marine electronic communications (such as NMEA 0183, also known as IEC 61162). Timing is vital to the proper synchronization and slot mapping (transmission scheduling) for a Class A unit. Therefore, every unit is required to have an internal time base, synchronized to a global navigation satellite system (e.g. GPS) receiver.[17] This internal receiver may also be used for position information. However, position is typically provided by an external receiver such as GPS, LORAN or an inertial navigation system and the internal receiver is only used as a backup for position information. Other information broadcast by the AIS, if available, is electronically obtained from shipboard equipment through standard marine data connections. Heading information, position (latitude and longitude), "speed over ground", and rate of turn are normally provided by all ships equipped with AIS. Other information, such as angle of heel, pitch and roll, destination, and ETA may also be provided.
An AIS transponder normally works in an autonomous and continuous mode, regardless of whether it is operating in the open seas or coastal or inland areas. AIS transponders use two different frequencies, VHF maritime channels 87B (161.975 MHz) and 88B (162.025 MHz), and use 9.6 kbit/s Gaussian minimum shift keying (GMSK) modulation over 25 or 12.5 kHz channels using the High-level Data Link Control (HDLC) packet protocol. Although only one radio channel is necessary, each station transmits and receives over two radio channels to avoid interference problems, and to allow channels to be shifted without communications loss from other ships. The system provides for automatic contention resolution between itself and other stations, and communications integrity is maintained even in overload situations.
In order to ensure that the VHF transmissions of different transponders do not occur at the same time, the signals are time multiplexed using a technology called Self-Organized Time Division Multiple Access (STDMA). The design of this technology is patented,[18] and whether this patent has been waived for use by SOLAS vessels is a matter of debate between the manufacturers of AIS systems and the patent holder, Håkan Lans. Moreover, the United States Patent and Trademark Office (USPTO) canceled all claims in the original patent on March 30, 2010.[19]
In order to make the most efficient use of the bandwidth available, vessels that are anchored or moving slowly transmit less frequently than those that are moving faster or are maneuvering. The update rate ranges from 3 minutes for anchored or moored vessels, to 2 seconds for fast moving or maneuvering vessels, the latter being similar to that of conventional marine radar.
Each AIS station determines its own transmission schedule (slot), based upon data link traffic history and an awareness of probable future actions by other stations. A position report from one station fits into one of 2,250 time slots established every 60 seconds on each frequency. AIS stations continuously synchronize themselves to each other, to avoid overlap of slot transmissions. Slot selection by an AIS station is randomized within a defined interval and tagged with a random timeout of between 0 and 8 frames. When a station changes its slot assignment, it announces both the new location and the timeout for that location. In this way new stations, including those stations which suddenly come within radio range close to other vessels, will always be received by those vessels.
The required ship reporting capacity according to the IMO performance standard is a minimum of 2,000 time slots per minute, though the system provides 4,500 time slots per minute. The SOTDMA broadcast mode allows the system to be overloaded by 400 to 500% through sharing of slots, and still provides nearly 100% throughput for ships closer than 8 to 10 nmi to each other in a ship to ship mode. In the event of system overload, only targets further away will be subject to drop-out, in order to give preference to nearer targets, which are of greater concern to ship operators. In practice, the capacity of the system is nearly unlimited, allowing for a great number of ships to be accommodated at the same time.
The system coverage range is similar to other VHF applications, essentially depending on the height of the antenna, but is slightly better due to the use of digital VHF instead of analog VHF. Its propagation is better than that of radar, due to the longer wavelength, so it is possible to reach around bends and behind islands if the land masses are not too high. The look-ahead distance at sea is nominally 20 nmi (37 km). With the help of repeater stations, the coverage for both ship and VTS stations can be improved considerably.
The system is backward compatible with digital selective calling systems, allowing shore-based GMDSS systems to inexpensively establish AIS operating channels and identify and track AIS-equipped vessels, and is intended to fully replace existing DSC-based transponder systems.
Shore-based AIS network systems are now being built up around the world. One of the biggest fully operational, real time systems with full routing capability is in China. This system was built between 2003 and 2007 and was delivered by Saab TransponderTech.[citation needed] The entire Chinese coastline is covered with approximately 250 base stations in hot-standby configurations including 70 computer servers in three main regions. Hundreds of shore based users, including about 25 VTS centers, are connected to the network and are able to see the maritime picture, and can also communicate with each ship using SRM's (Safety Related Messages). All data are in real time. The system was designed to improve the safety and security of ships and port facilities. It is also designed according to an SOA architecture with socket based connection and using IEC AIS standardized protocol all the way to the VTS users. The base stations have hot-standby units (IEC 62320-1) and the network is the third generation network solution.
By the beginning of 2007, a new worldwide standard for AIS base stations was approved, the IEC 62320-1 standard. The old IALA recommendation and the new IEC 62320-1 standard are in some functions incompatible, and therefore attached network solutions have to be upgraded. This will not affect users, but system builders need to upgrade software to accommodate the new standard. A standard for AIS base stations has been long awaited. Currently ad-hoc networks exist with class A mobiles. Base stations can control the AIS message traffic in a region, which will hopefully reduce the number of packet collisions.
Broadcast information
An AIS transceiver sends the following data every 2 to 10 seconds depending on a vessel's speed while underway, and every 3 minutes while a vessel is at anchor:
- The vessel's Maritime Mobile Service Identity (MMSI) – a unique nine digit identification number.
- Navigation status – "at anchor", "under way using engine(s)", "not under command", etc.
- Rate of turn – right or left, from 0 to 720 degrees per minute
- Speed over ground – 0.1-knot (0.19 km/h) resolution from 0 to 102 knots (189 km/h)
- Positional accuracy:
- Longitude – to 0.0001 minutes
- Latitude – to 0.0001 minutes
- Course over ground – relative to true north to 0.1°
- True heading – 0 to 359 degrees (for example from a gyro compass)
- UTC Seconds – The seconds field of the UTC time when these data were generated. A complete timestamp is not present.
In addition, the following data are broadcast every 6 minutes:
- IMO ship identification number – a seven digit number that remains unchanged upon transfer of the ship's registration to another country
- Radio call sign – international radio call sign, up to seven characters, assigned to the vessel by its country of registry
- Name – 20 characters to represent the name of the vessel
- Type of ship/cargo
- Dimensions of ship – to nearest meter
- Location of positioning system's (e.g., GPS) antenna on board the vessel - in meters aft of bow and meters port of starboard
- Type of positioning system – such as GPS, DGPS or LORAN-C.
- Draught of ship – 0.1 meter to 25.5 meters
- Destination – max. 20 characters
- ETA (estimated time of arrival) at destination – UTC month/date hour:minute
Detailed description: Class B units
Class B transponders are designed for carriage by sub-SOLAS vessels. Each consists of one VHF transmitter, two VHF Carrier Sense Time Division Multiple Access (CSTDMA) receivers, one of which is multiplexed with the VHF Digital Selective Calling (DSC) receiver, and a GPS active antenna. Although the data output format supports heading information, in general units are not interfaced to a compass, so this data is seldom transmitted. Output is the standard AIS data stream at 38.400 kbit/s, as RS232 and/or NMEA formats. To prevent overloading of the available bandwidth, transmission power is restricted to 2 W, giving a range of about 5–10 mi.
At the time of writing (November 2009) almost all Class B units use boards from Software Radio Technology (SRT). Exceptions to this are Furuno, AMEC, Weatherdock and Vesper Marine.
Four messages are defined for class B units:
Message 14: Safety Related Message
This message is transmitted on request for the user – some transponders have a button that enables it to be sent, or it can be sent through the software interface. It sends a pre-defined safety message.
Message 18: Standard Class B CS Position Report
This message is sent every 3 minutes where speed over ground (SOG) is less than 2 knots, or every 30 seconds for greater speeds.
MMSI, time, SOG, COG, longitude, latitude, true heading
Message 19: Extended Class B Equipment Position Report
This message was designed for the SOTDMA protocol, and is too long to be transmitted as CSTDMA. However a coast station can poll the transponder for this message to be sent.
MMSI, time, SOG, COG, longitude, latitude, true heading, ship type, dimensions.
Message 24: Class B CS Static Data Report
This message is sent every 6 minutes, the same time interval as for Class A transponders. Because of its length, this message is divided into two parts, sent within one minute of each other.
Note that this message was defined after the original AIS specifications, so some Class A units may need a firmware upgrade to be able to decode this message.
MMSI, boat name, ship type, call sign, dimensions, and equipment vendor id.
Detailed description: AIS receivers
A number of manufacturers offer AIS receivers, designed for monitoring AIS traffic. These may have two receivers, for monitoring both frequencies simultaneously, or they may switch between frequencies (thereby missing messages on the other channel, but at reduced price). In general they will output RS232, NMEA, USB or UDP data for display on electronic chart plotters or computers.
See also
- Automatic Packet Reporting System
- Håkan Lans – The inventor of STDMA, used as the communication protocol in AIS.
- Ship location mapping service – uses AIS input data from water vessels worldwide.
- NMEA 0183
- TCAS
References and footnotes
- ^ "Types of Automatic Identification Systems". U.S. Coast Guard Navigation Center. Retrieved 2010-07-13.
- ^ "Circular 289: Guidance On the Use of AIS Application-Specific Messages" (PDF). IMO. Retrieved 9 July 2011.
- ^ Alexander, Lee (2010). "Establishing an IALA AIS Binary Message Register: Recommended Process" (PDF). IALA Conference. 17: 108–115.
{{cite journal}}
: Unknown parameter|coauthors=
ignored (|author=
suggested) (help) - ^ Top User Photos, Vessel Tracker Community. Retrieved October 14, 2008.
- ^ "Maritime security – AIS ship data". 79th session: 1–10 December 2004. IMO Maritime Safety Committee. Archived from the original on 2007-02-20. Retrieved 2007-01-08.
- ^ http://www.orbcomm.com/services-ais.htm
- ^ http://micro.newswire.ca/release.cgi?rkey=1604282053&view=28380-0&Start=60&htm=0
- ^ "Atlantis leaves Columbus with a radio eye on Earth's sea traffic". ESA. 4 December 2009. Retrieved 6 December 2009.
- ^ http://www.luxspace.lu
- ^ "ESA satellite receiver brings worldwide sea traffic tracking within reach". ESA. 23 April 2009. Retrieved 6 December 2009.
- ^ http://www.spacequest.com/newsroom.php
- ^ "SpaceQuest receiving AIS SART messages from orbit". Kurt Schwehr. 29 April 2010. Retrieved 6 August 2011.
- ^ http://www.romsenter.no/?module=Articles;action=Article.publicShow;ID=51433
- ^ http://www.nordicspace.net/PDF/NSA239.pdf
- ^ Recommendation ITU-R M.1371-4. Technical characteristics for an automatic identification system using time division multiple access in the VHF maritime mobile band (Recommendation ITU-R M.1371-4). International Telecommunications Union.
{{cite book}}
: CS1 maint: numeric names: authors list (link) - ^ "AIS Messages". U.S. Coast Guard Navigation Center. Retrieved 2010-07-13.
- ^ IEC 61993-2 Clause 6.2
- ^ US patent 5506587, Lans, Håkan, "Position indicating system", issued 1996-04-09, assigned to GP&C Systems International AB
- ^ USPTO ex-parte reexamination certificate (7428th), issued on March 30, 2010
External links
![]() | This article's use of external links may not follow Wikipedia's policies or guidelines. (January 2012) |
Commercial AIS
- AIVDM.txt
- AIS references
- Commissioners of Irish Lights Oct-11 - AIS Home page
- exactEarth Oct-11 - Satellite-AIS
- IMO AIS transponders information Oct-11
- Kordia Maritime AIS Services Oct-11 - Maritime coverage of New Zealand’s coastal waters
- Vesper Marine Oct-11 - Information on AIS and dedicated AIS instrumentation
- UAIS.org Oct-11 - Articles and information about AIS
- US Coast Guard Automatic Identification System Overview Oct-11
- GMDSS AIS Tester Oct-11
- Yacht Insurance Guide to AIS Oct-11 - AIS Guide and links
- Template:Es icon Atlanticsource Oct-11 - Commercial AIS
Open source AIS software implementations
- AIS Parser Oct-11 - Free AIS Parser SDK
- gpsd - Straight C implementation
- FreeAIS - Java implementation
- Libais - C++ implementation with CPython interface
- Noaadata - Pure python implementation
Free AIS data sharing
Free graphical AIS tracking
No login required
- MarineTraffic (Immediate details of ships) Oct-11
- Shipfinder (On delay for free version)- Oct-11
- Shiptracking (Realtime, Estimated arrivals) Oct-11
- VT Explorer Oct-11
- Shipplotter Denmark Oct-11 - Vessels - Denmark
- Nantes AIS - Oct-11 - Vessels - France Nantes
- Trieste AIS Oct-11 - Vessels - Italy Trieste
- Ribeirodearaujo Oct-11 - Vessels - Portugal
- Shipplotter - Norway Oct-11 - Vessels -Norway
- Öckerö AIS Oct-11 - Vessels - Sweden
- Landsort-AIS Oct-11 - Vessels - Sweden
- San Francisco Oct-11 - Vessels - US San Francisco
- Aisparser Oct-11 - Vessels - US Seattle
- Vesseltrax Oct-11 - Vessels - US GOM
- Shipais Oct-11 - Vessels - UK
- Orwellais Oct-11 - Vessels - UK/Canada
- (Turkish) GemiTrafik.com Nov-11 - Vessels - Turkey/Marmara Region
Login required
- Digital-seas - Oct-11
- Mariweb - Oct-11
- Maritime Intelligence & Publications: IHS Fairplay - Oct-11
- ShippingExplorer - Oct-11
- Vesseltracker - Oct-11
- BLM-Shipping - Oct-11