Photoflash battery: Difference between revisions
Wtshymanski (talk | contribs) per talk page discussion |
Added AA & C back into article - see photo link in talk page |
||
| Line 5: | Line 5: | ||
A '''photoflash battery''' is a specialized [[zinc-carbon battery]] optimized to provide a high [[electric current]] output for a short duration of time, such as required to fire a [[Flash (photography)|flashbulb]]. Service life for this battery in [[flashlight]] service is short, since flashlights required a lower but continuous long duration current. |
A '''photoflash battery''' is a specialized [[zinc-carbon battery]] optimized to provide a high [[electric current]] output for a short duration of time, such as required to fire a [[Flash (photography)|flashbulb]]. Service life for this battery in [[flashlight]] service is short, since flashlights required a lower but continuous long duration current. |
||
Photoflash cells were in production during the flashbulb era, and were slowly phased out as [[alkaline cell]]s came into general usage. The photoflash cell was produced as a 1.5 volt [[D battery|size D]]. |
Photoflash cells were in production during the flashbulb era, and were slowly phased out as [[alkaline cell]]s came into general usage. The photoflash cell was produced as a 1.5 volt [[D battery|size D]], C Size and AA Size. |
||
The [[cathode]] (the material packed between the [[carbon]] rod and [[zinc]] shell) of a zinc-carbon cell is generally made of powdered [[carbon black]] (or [[acetylene black]]), [[manganese dioxide]] and [[electrolyte]]. The MnO<sub>2</sub> to carbon ratios vary between 10:1 and 3:1 for general purpose cells. A 1:1 mixture is used for photoflash batteries. This allows a high current output with intermittent use, perfect for photoflash use.These cells have reduced capacity compared to those with a higher content of MnO<sub>2</sub>.<ref name="Linden2002">David Linden, Thomas B. Reddy (ed). Handbook Of Batteries 3rd Edition. McGraw-Hill, New York, 2002 {{ISBN|0-07-135978-8}} Chapter 8 </ref> |
The [[cathode]] (the material packed between the [[carbon]] rod and [[zinc]] shell) of a zinc-carbon cell is generally made of powdered [[carbon black]] (or [[acetylene black]]), [[manganese dioxide]] and [[electrolyte]]. The MnO<sub>2</sub> to carbon ratios vary between 10:1 and 3:1 for general purpose cells. A 1:1 mixture is used for photoflash batteries. This allows a high current output with intermittent use, perfect for photoflash use.These cells have reduced capacity compared to those with a higher content of MnO<sub>2</sub>.<ref name="Linden2002">David Linden, Thomas B. Reddy (ed). Handbook Of Batteries 3rd Edition. McGraw-Hill, New York, 2002 {{ISBN|0-07-135978-8}} Chapter 8 </ref> |
||
Revision as of 19:32, 5 December 2018
 | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages)
|
A photoflash battery is a specialized zinc-carbon battery optimized to provide a high electric current output for a short duration of time, such as required to fire a flashbulb. Service life for this battery in flashlight service is short, since flashlights required a lower but continuous long duration current.
Photoflash cells were in production during the flashbulb era, and were slowly phased out as alkaline cells came into general usage. The photoflash cell was produced as a 1.5 volt size D, C Size and AA Size.
The cathode (the material packed between the carbon rod and zinc shell) of a zinc-carbon cell is generally made of powdered carbon black (or acetylene black), manganese dioxide and electrolyte. The MnO2 to carbon ratios vary between 10:1 and 3:1 for general purpose cells. A 1:1 mixture is used for photoflash batteries. This allows a high current output with intermittent use, perfect for photoflash use.These cells have reduced capacity compared to those with a higher content of MnO2.[1]
Another common type of photoflash battery was a higher-voltage series assembly of cells, often totalling 22.5 volts, used in battery–capacitor flash units. The battery slowly charged a capacitor, which then was discharged through a flashbulb to provide the heavy pulse of current to set off the bulb. [citation needed]
See also
References
- ^ David Linden, Thomas B. Reddy (ed). Handbook Of Batteries 3rd Edition. McGraw-Hill, New York, 2002 ISBN 0-07-135978-8 Chapter 8
External links
 | This tool article is a stub. You can help Wikipedia by expanding it. |