Angang Constitution
Chinese | 鞍钢宪法[1] |
---|---|
Date of formation | March 22, 1960[2] |
The Angang Constitution[3] (simplified Chinese: 鞍钢宪法; traditional Chinese: 鞍鋼憲法; pinyin: Āngāng xiànfǎ), also known as An-Steel Constitution[4] or Constitution of the Anshan Iron and Steel Complex,[5] refers to a set of basic experiences of enterprise management summarized by China's Anshan Iron and Steel Company (鞍山钢铁公司) in the early 1960s.[6] This "Constitution" was formed in 1960.[7]
In 1960, Ma Bin (马宾) presided over the creation of the Angang experience (鞍钢经验), namely "two participations, one reform and three-in-one unity", mass technical innovation and revolution, which was called "Angang Constitution"[8] and "Mabin Constitution" (马宾宪法) by Mao Zedong,[9] and was implemented in China.[10] Therefore, Mao was one of the key participants in the formulation of the "Angang Constitution".[11]
Development
In 1958, prompted by the political movement of the Great Leap Forward, workers at Angang laid out rules to challenge the existing operations of their workplace.[12] These ideas were reflected in the March 11, 1960, "Report of the Anshan City Committee Regarding the Beginning of the Movement for Technological Reform and Technological Revolution."[13] On March 22, 1960, the Communist Party of China's Central Committee approved the document and distributed it to various governmental bodies.[13] Mao designated the document as the "Angang Constitution"[13] and stated that its principles should guide the operation of state enterprises.[12]
The Angang Constitution was an attempt to address the question of how workers could take the initiative and establish new forms of political organization, without which the industrial danwei might end up reproducing the same subordinate relationship of workers to bosses as existed under management at a capitalist factory.[14] It aimed to achieve industrial democracy based on shared responsibilities and equality, which would in turn improve efficiency and morale.[15] The Angang Constitution was a response by workers to the principles of the Magang Constitution, a Soviet model of management techniques, rules, laws, and standards which Angang had previously followed.[13]
Basic contents
The basic contents of the Angang Constitution include carrying out a technical revolution, conducting mass mobilization (群众运动), implementing "two participations, one reform and three-in-one unity" (cadres participating in labor, workers participating in management, reforming unreasonable rules and regulations, and three combinations of workers, leading cadres and technicians),[16] insisting on placing politics in command (政治挂帅), and implementing the factory director responsibility system under the leadership of the Party Committee (党委领导下的厂长负责制).[17] In implementing the factory director responsibility system under the leadership of the Party Committee, it both strengthened the role of the Party in enterprises while also promoting the development of the mass line and increasing development of mass democracy.[18] In implementing the "two participations, one reform and three-in-one unity," it required office workers to take part in manual labor, managers to work in production, and workers to participate in management.[15] Technicians were required to take part in both production and management.[15] The Angang Constitution also provided for the election of leaders within production units.[15] Mao viewed "two participations, the one reform, and three combinations," as an important and unique experiment in promoting democratic and scientific management of enterprises.[18]
Like the Magang Constitution which it challenged, the Angang Constitution was a set of guiding principles, not a constitution in the strict sense of the term.[19]
Significance
During the Great Proletarian Cultural Revolution (GPCR), the Angang Constitution was important in phasing out workplace distinctions between workers and management, and between technical workers and direct producers.[20] It also increased worker creativity and motivation.[18]
Promotion of the Angang Constitution also served the political goal of critiquing "rightist opportunism" in the context of the Sino-Soviet debates.[18]
Evaluations
Economist and historian Charles Bettelheim visited China in 1971 to study changes in the management of factories following the GPCR.[21] Implementation of the Angang Constitution at the factories Bettelheim visited impressed him.[21] Bettelheim observed high levels of political consciousness among workers, worker involvement in solving management issues, reliance on production workers for technical innovations, and the changing of unreasonable factory rules and regulations.[21]
In 1996, Cui Zhiyuan compared the Angang Constitution to Post-Fordism, arguing that the Angang Constitution was "the earliest and distinctive challenge to the rigid Ford-style division of labor system"[22] and "an institutional innovation" of the "post-Ford mode of production". "The collective ownership system (集体所有制) of the people's communes was conducive to the democratic participation of the peasants.[23] He further stated that "no matter how many mistakes there were in the implementation of the Angang Constitution, the spirit of economic democracy is still a valuable spiritual resource for China in the 21st century".[24]
Cui described the "Angang Constitution" as a model of institutional innovation and a source of "post-Ford production method" (后福特生产方式). In this regard, Chinese historian Gao Hua (高华) wrote an article criticizing that this is purely a big joke with history, because the essence of the "Angang Constitution" is the leadership of the Party Committee and highlighting politics.[25]
He Jiadong (何家栋) and Li Shenzhi said that history tells us that Angang Constitution was only a utopian blueprint at that time, not a reality in life. In reality, the corporate system is under the leadership of the party committee and putting the secretary in command (书记挂帅).[26]
Academic Cai Xiang writes that in establishing the kinds of managerial rights that workers and intellectuals sought while affirming the value of human beings, the Anshang Constitution "marks a clear difference from the ossified Soviet system of management and bureaucratism as congealed in the Ma[gang] Constitution."[27]
Economist Pao-Yu Ching described the Angang Constitution as "represent[ing] a spirit toward the direction of ultimately phasing out wage labor."[12] Ching writes, however, that before the GPCR, only lip services was paid to these principles.[12]
References
- ^ L. Chun (5 December 2013). China and Global Capitalism: Reflections on Marxism, History, and Contemporary Politics. Springer. pp. 192–. ISBN 978-1-137-30126-0.
- ^ "March 22, 1960, "Angang Constitution"". State Council Information Office. 2011-03-22.
- ^ Y. Y. Kueh (1 January 2008). China's New Industrialization Strategy: Was Chairman Mao Really Necessary?. Edward Elgar Publishing. pp. 15–. ISBN 978-1-84844-140-8.
- ^ "Case Study of Typical Impact of "An-Steel Constitution" on External Communication". CNKI. 2020-02-03.
- ^ The Chinese Economy: Translations and Studies. M.E. Sharpe. 2005. pp. 26–.
- ^ "The past, present and future of migrant workers". The Paper. 2020-11-07.
- ^ Chun Lin (2006). The Transformation of Chinese Socialism. Duke University Press. pp. 153–. ISBN 0-8223-3798-3.
- ^ Kaidong Feng (30 August 2019). Innovation and Industrial Development in China: A Schumpeterian Perspective on China's Economic Transformation. Routledge. pp. 189–. ISBN 978-0-429-65600-2.
- ^ "The alternation of new age and old age". The Economic Observer. 2009-07-17.
- ^ "Ma Bin passed away at the age of 104". Duowei News. 2017-03-29.
- ^ "Ma Bin, an important participant in the Angang Constitution, passed away". Utopia. 2017-03-28.
- ^ a b c d Ching, Pao-Yu (2021). Revolution and counterrevolution : China's continuing class struggle since liberation (2nd ed.). Paris: Foreign languages press. p. 72. ISBN 978-2-491182-89-2. OCLC 1325647379.
- ^ a b c d Cai, Xiang; 蔡翔 (2016). Revolution and its narratives : China's socialist literary and cultural imaginaries (1949-1966). Rebecca E. Karl, Xueping Zhong, 钟雪萍. Durham: Duke University Press. p. 340. ISBN 978-0-8223-7461-9. OCLC 932368688.
- ^ Russo, Alessandro (2020). Cultural Revolution and revolutionary culture. Durham: Duke University Press. p. 261. ISBN 978-1-4780-1218-4. OCLC 1156439609.
- ^ a b c d Lin, Chun (2006). The transformation of Chinese socialism. Durham [N.C.]: Duke University Press. p. 154. ISBN 978-0-8223-3785-0. OCLC 63178961.
- ^ "60th anniversary of the birth of the "Angang Constitution"". Xinhua News Agency. 2020-03-26. Archived from the original on August 5, 2020.
- ^ Zhang Boshu (23 January 2016). Changing China: The Schools of Chinese Thought. China Independent Writers Publishing Inc. pp. 88–.
- ^ a b c d Cai, Xiang; 蔡翔 (2016). Revolution and its narratives : China's socialist literary and cultural imaginaries (1949-1966). Rebecca E. Karl, Xueping Zhong, 钟雪萍. Durham. p. 341. ISBN 978-0-8223-7461-9. OCLC 932368688.
{{cite book}}
: CS1 maint: location missing publisher (link) - ^ "Comrade Mao Zedong's strategic guidance for China's steel industry". People's Daily. 2012-06-08. Archived from the original on 2021-01-15.
- ^ Ching, Pao-Yu (2021). Revolution and counterrevolution : China's continuing class struggle since liberation (2nd ed.). Paris: Foreign languages press. p. 188. ISBN 978-2-491182-89-2. OCLC 1325647379.
- ^ a b c Ching, Pao-Yu (2021). Revolution and counterrevolution : China's continuing class struggle since liberation (2nd ed.). Paris: Foreign languages press. p. 132. ISBN 978-2-491182-89-2. OCLC 1325647379.
- ^ Zhu Lingjun (8 June 2015). Social Capital and Party Leadership: An Attempt to Analyze the Framework of Party Sociology. Compilation and Translation Bureau. pp. 234–.
- ^ Gong Yang (2003). Thoughts: China's "New Left" and its Impact. China Social Sciences Press. pp. 325–. ISBN 978-7-5004-3971-4.
- ^ Gao Ruiquan (2005). Chinese Modern Spiritual Tradition: A Genealogy of Chinese Conceptions of Modernity. Shanghai Ancient Books Publishing House. pp. 242–. ISBN 978-7-5325-4093-8.
- ^ Modern China Studies, Issues 72-75. Center for Modern China. 2001. pp. 242–.
- ^ Li Shenzhi; He Jiadong (2000). China's Road. Southern Daily Publishing House. pp. 301–. ISBN 978-7-80652-017-8.
- ^ Cai, Xiang; 蔡翔 (2016). Revolution and its narratives : China's socialist literary and cultural imaginaries (1949-1966). Rebecca E. Karl, Xueping Zhong, 钟雪萍. Durham. p. 342. ISBN 978-0-8223-7461-9. OCLC 932368688.
{{cite book}}
: CS1 maint: location missing publisher (link)